Beastlymac (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 01:43:01 PM |
|
I'm unclear as to any real solution to a recurring problem I'm having and seeing in this thread, perhaps it was lost in translation but I am trying to get mine running on bfgminer for Win 7 as per the directions in the Op. Windows has installed and recognized the devices, when I run bfgminer it tells me my bluefury com ports are busy and can't be contacted.
Additional observation, when these are powered but with usb hub to pc disconnected the light is a yellow/orange color, as soon as I connect the hub they turn dark orange/red color.
If someone could provide a clear concise troubleshooting/solution for this issue I'd greatly appreciate it (and please add it to the OP it seems to be a common enough problem....)
Thanks!
The USB should be yellow when it has power and red when it is plugged into a computer. When it is initialising it will turn organge and when it is working it will flash yellow/red. just a dummy question. do we talk here about RED fury or BLUE fury ? Why is it named blue when no one talk/write about blue light. Maybe i forgot ( the years are here) , but i have in memory that BLUE furys will have blue light ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) They have a red light and a blue pcb
|
Message me if you have any problems
|
|
|
winit
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 01:56:44 PM |
|
I can't get the sticks to work on OSX - always time out in Bitminter.
When plugging a stick in, it comes up as a modem in networking
Am I doing something obviously wrong or is the Bitminter beta not actually functioning right yet
|
|
|
|
nhminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 02:44:25 PM |
|
I have talked with our EE he has said that the hashrate of 2.2ghs is because of the bitfury chip. He says that this is the average that people will be getting. If you are lucky you can get units that perform higher or if you aren't lucky you could potentially get some worse units it all depends on the bitfury chip. It seems when we build prototypes that we where lucky with the chips that we received.
Edit. It is possible to overclock the units and push them to potentially 2.7 by replacing the 22k resistor with a 10k one.
Can you give some additional details or thread link about how to "replacing the 22k resistor with a 10k one"
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
tk1337
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 03:26:41 PM |
|
just a dummy question. do we talk here about RED fury or BLUE fury ? Why is it named blue when no one talk/write about blue light. Maybe i forgot ( the years are here) , but i have in memory that BLUE furys will have blue light ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) hehe, could always do what I'm doing, replacing the LED's with a 3528 bi-color blue/yellow LED (PN# OSYBS4S2C1A) and I'm considering anodizing the heatsinks blue as well...
|
|
|
|
tk1337
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 03:27:42 PM |
|
I can't get the sticks to work on OSX - always time out in Bitminter.
When plugging a stick in, it comes up as a modem in networking
Am I doing something obviously wrong or is the Bitminter beta not actually functioning right yet
I believe the last that was reported from Bitminter was that they were still working on it (can't remember who it is that maintains the bitminter code atm).
|
|
|
|
winit
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 03:30:24 PM |
|
He's released two updates but it doesnt actually work
|
|
|
|
RicRock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 05:59:55 PM |
|
Received 2 today.
Starting bfgminer 3.5 with -S bitfury:/dev/ACM0 -S bitfury:/dev/ACM1
Recognized
[2013-11-06 12:51:49] lowlevel_scan: Found vcom device at dev_t:01a6000000000000 (path=/dev/ttyACM1, vid=0000, pid=0000, manuf=BFMG, prod=Bitfury BF1, serial=A4931313633351A01281) [2013-11-06 12:51:49] lowlevel_scan: Found vcom device at dev_t:00a6000000000000 (path=/dev/ttyACM0, vid=0000, pid=0000, manuf=BFMG, prod=Bitfury BF1, serial=A4931313633351A01221)
But never hash.
With erupters, I see something like this
[2013-11-06 12:55:41] Icarus Detect: Attempting to open /dev/ttyUSB0 [2013-11-06 12:55:41] Acquired exclusive advisory lock on /dev/ttyUSB0 [2013-11-06 12:55:41] Icarus Detect: Test succeeded at /dev/ttyUSB0: got 000187a2 [2013-11-06 12:55:41] Found BES 0 at /dev/ttyUSB0 [2013-11-06 12:55:41] BES 0: Init: baud=115200 work_division=0 fpga_count=0 [2013-11-06 12:55:41] BES 0: Init: mode=default read_count=126 limit=0ms Hs=2.976100e-09
But after the initial line regarding ACM0/1 I see nothing further in the debug output.
Please advise
|
|
|
|
fractalbc
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 07:50:25 PM |
|
The USB should be yellow when it has power and red when it is plugged into a computer. When it is initialising it will turn organge and when it is working it will flash yellow/red.
So what does just a blinking red LED stand for? That is what my 5 miners are doing. It means they are hashing. It just means that you have stopped the mining software and not reset the device before starting the software again. Confirmed! Stopping bfgminer 3.4.0 and restarting it gets the red LED flashing on and off. Stopping bfgminer, pressing the RESET button on the usb stick and restarting bfgminer gets the alternating red / yellow. There is no apparent difference in hash rate or error rate between the two scenereo's. The only difference is the pattern of the light.
|
|
|
|
winit
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 09:03:04 PM |
|
No joy with either BFGminer or CGminer on OSX. Simply will not pick up the device
|
|
|
|
nite423
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 09:06:08 PM |
|
The USB should be yellow when it has power and red when it is plugged into a computer. When it is initialising it will turn organge and when it is working it will flash yellow/red.
So what does just a blinking red LED stand for? That is what my 5 miners are doing. It means they are hashing. It just means that you have stopped the mining software and not reset the device before starting the software again. Confirmed! Stopping bfgminer 3.4.0 and restarting it gets the red LED flashing on and off. Stopping bfgminer, pressing the RESET button on the usb stick and restarting bfgminer gets the alternating red / yellow. There is no apparent difference in hash rate or error rate between the two scenereo's. The only difference is the pattern of the light. Well, no matter what I do, with CGMiner it just blinks red. And every time I restart the hash rate on each miner is different....
|
|
|
|
ssinc
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 364
Merit: 250
Hash for Cash!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 09:23:01 PM |
|
CGminer 3.7+ on Windows 7 has had only had blinking Red lights no matter what.
|
|
|
|
nite423
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 09:46:57 PM |
|
CGminer 3.7+ on Windows 7 has had only had blinking Red lights no matter what.
Thank you. Ok, I'm done resetting these things for now...this last time I now have one screaming at nearly 3Gh/s but another isn't even getting 1Gh/s. The overall hash rate is....close each time, I wonder if this is just some weird reporting going on with CGMiner.
|
|
|
|
x3maniac
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 10:39:12 PM |
|
just got the batch #2 and the heat sinks are difference ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) hoping this change will help with mining power
|
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 10:41:33 PM |
|
Reporting of hashrate in cgminer is based purely on return of valid shares, and since that's a luck based phenomenon, it takes thousands of shares to get an accurate representation of hashrate, so over an hour or so.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
stupidnic
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 10:56:12 PM |
|
Yes I just got a promising email from Luke so we should have a firmware update out soon that will fix the error rate and improve the hash rate. Also people who are getting bellow 2ghs are you using windows?
I am getting about spot on 2.0GH/s on two units using Debian 7.0 x64 with cgminer 3.7.2. -------------------------------------------------------------------------------- [P]ool management [S]ettings [D]isplay options [Q]uit BF1 2: | 2.096G/2.074Gh/s | A:2540 R:16 HW:0 WU:29.2/m BF1 4: | 2.009G/1.970Gh/s | A:2026 R:14 HW:0 WU:28.1/m -------------------------------------------------------------------------------- I have also noticed that the units are very temperamental with some USB hubs. Running even one unit in a USB hub (dlink) either one will eventually time out with an error about communication timeouts. If I connect them directly to the computer, they run fine with the numbers show above. I suspect that they are rather picky about power, but that is only a guess at this point.
|
|
|
|
Epinnoia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 10:59:51 PM |
|
just got the batch #2 and the heat sinks are difference ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) hoping this change will help with mining power I don't think it will make a bit of difference except less metal used = more profits and/or lower costs in future units. They simply didn't get nearly as hot as anticipated.
|
|
|
|
Epinnoia
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 06, 2013, 11:40:35 PM Last edit: November 07, 2013, 01:09:14 AM by Epinnoia |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FJI2tCFL.jpg&t=665&c=NMKa6POzL-YdYg) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FQoqFXzs.png&t=665&c=XWr03gad8XYbtQ) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F6Qz8fAx.png&t=665&c=INgdmm6TQzvjHQ) Win7 64bit System I just got the 2nd fury today with the scaled-back black heat sink (pictured above). It is very clearly running about twice as fast as the first one with the heavier heat sink that I received last week. Something I noticed -- BFGminer shows the estimated hash rate (first and 2nd numbers) on the faulty one to be about 100MH/sec HIGHER than the one I got today (2.23GH/sec vs. 2.33GH/sec). The 3rd number in BFG, the effective rate, is where they differ drastically. Perhaps the firmware in the first one was a little too aggressive -- resulting in it being knocked back in stepping? That's my feel of it after watching it rather closely these past few days. Shouldn't I wait and see if BeastlyMac releases the firmware update? SSINC has replacements in, but I have a sneaky suspicion that the one with the larger and better heatsink would perform the same if it had the same firmware as this more recent one. I kind of like the ability to tell them apart so easily... And if a firmware upgrade fixes the problem, that saves on shipping costs (both ways), as well as quite a bit of down mining time. BFGminer does seem to squeeze about 10% more out of the newer fury, though. 1.97GH/sec in cgminer 3.7.2, and 2.17GH/sec in BFGminer 3.2.0. That's nearly 200MH/sec difference in favor of BFGminer 3.2.0. Maybe another 30min in each window would have brought the window narrower, but I don't think by very much.
|
|
|
|
Taugeran
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 07, 2013, 01:09:57 AM |
|
No joy with either BFGminer or CGminer on OSX. Simply will not pick up the device
to get it to recognize and hash: on a mac they will show up as simultaneously under /dev as cu.usbmodem<####> and tty.usbmodem<####> do bfgminer -S:/dev/cu.usbmodem#### <rest of your options>
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
pyra-proxy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 07, 2013, 01:20:27 AM |
|
I got my first HUGE problem solved with the help of Epinnoia, Thanks a bunch! So bfgminer would not for the life of it be able to communicate on these, I'm on Win 7 and followed the op directions to the letter. The problem was 2 fold, 1st the port had a bad default baud rate (9600 instead of the 115200 which Epinnoia recommended to me), second was even after this changed I had to make sure I pressed the "RST" button to make the change take effect (even unplugging/replugging these in did not cause the change to help).
Now for my next HUGE problem..... 60% + HW error rates an all of these devices....
Thanks for the help in advance!
|
|
|
|
juggalodarkclow
Legendary
Offline
Activity: 980
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 07, 2013, 01:33:13 AM |
|
Just adding my info in case it helps with a firmware update~
Win7 x64 CGMiner 3.7.2 BF1 @ 1.99Gh/s 0 Rejects, 0 Errors
|
|
|
|
|