zulover
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 01:02:02 PM |
|
Any setup guides for this, if someone cd post link most helpful.
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 01:23:34 PM |
|
260/1005 = 33 A ~ 396 watt 265/1030 = 37 A 265/1040 = 38,5 A 265/1050 = 39 A 270/1050 = 40,5 A You better use your corsair to powered HEX8 ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) How stable was it on 270 and 1050? Did you test it higher? How good did that work? Not recommended at all to set it higher than 270 ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Marto is free to correct me of course. Any way i have tried it up to 268 and all was good Agree, that's was for reference only ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) 5 A for additional 5GH really not worth it ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
|
|
|
|
gcube1305
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 01:29:07 PM |
|
Any setup guides for this, if someone cd post link most helpful.
If you use the TPLINK (wich is the best solution) you can use this : https://bitcointalk.org/index.php?topic=476326.0If not, simply read the old posts of this topic, you'll find information onto how to patch cgminer and recompile it.
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 01:32:07 PM |
|
Any setup guides for this, if someone cd post link most helpful.
If you use the TPLINK (wich is the best solution) you can use this : https://bitcointalk.org/index.php?topic=476326.0If not, simply read the old posts of this topic, you'll find information onto how to patch cgminer and recompile it. +100000 ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
foobar31
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 01:37:00 PM |
|
Is this normal?
Shipment number: ************* Date Operation Settlement 2014-03-06 17:12:10 Courier Pick-up SOFIA 2014-03-06 19:58:40 Received in Office SOFIA
It should be on the way by now right? Did they lost it already? Anyone else see the same?
cool they have some lag in data representing Confirmed, as far as I'm concerned their tracking page was updated yesterday night and I receive the package today...
|
|
|
|
Pentium100
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 02:48:01 PM Last edit: March 07, 2014, 04:30:31 PM by Pentium100 |
|
I have received my devices, will plug them in after I get home from work. EDIT: I have connected them (used a brand new Corsair CX750 PSU for the two HEX8A1 miners) and they all work. I have replaced the 4 port hub with a 7 port hub (this one even has diodes so that the HEXB miners do not backfeed the power to the PC). However, one of the HEX8A1 has 5% HW errors: cgminer version 3.12.3 - Started: [2014-03-07 18:15:15] ------------------------------------------------------------------------------------------ (5s):1.016T (avg):876.6Gh/s | A:181613 R:160 HW:17 WU:1999.8/m ST: 4 SS: 0 NB: 1 LW: 208536 GF: 0 RF: 0 Connected to stratum.mining.eligius.st diff 512 with stratum as user xxxx Block: 702b1b62... Diff:3.81G Started: [18:15:15] Best share: 6.58M ------------------------------------------------------------------------------------------ [P]ool management [S]ettings [D]isplay options [Q]uit HEXb 0: 540 900/ 910mV | 47.16G/47.48Gh/s | A:12592 R:64 HW: 0/0.00% WU: 663.5/m HEXb 1: 540 900/ 904mV | 42.62G/43.63Gh/s | A: 4320 R:64 HW: 0/0.00% WU: 609.5/m HEXb 2: 540 900/ 900mV | 50.97G/47.54Gh/s | A: 9408 R:32 HW: 0/0.00% WU: 664.4/m HEX8 0: 260 1000/ 946mV | 368.0G/232.6Gh/s | A:48431 R: 0 HW: 0/0.00% WU: 19.6/m HEX8 1: 260 1000/1003mV | 466.6G/221.0Gh/s | A:46511 R: 0 HW:17/5.40% WU: 19.9/m HEX8 2: 260 1000/1004mV | 461.7G/286.9Gh/s | A:60351 R: 0 HW: 0/0.00% WU: 23.8/m ------------------------------------------------------------------------------------------ [2014-03-07 18:29:36] Accepted 78a99991 Diff 543/512 HEX8 2 [2014-03-07 18:29:38] Accepted 02cde5ed Diff 23.4K/512 HEX8 0 [2014-03-07 18:29:40] Accepted 136d7087 Diff 3.37K/512 HEX8 2 [2014-03-07 18:29:42] Accepted 40d662b1 Diff 1.01K/512 HEX8 1 1. Is there a way to reduce the overclock on that particular device, while keeping it on the other two? 2. Do these devices report their temperature? If so, how can I see it? But yea, the heatsink arrangement makes it difficult to place the miners so they do not blow hot air into one another or other miners...
|
1GStzEi48CnQN6DgR1s3uAzB8ucuwdcvig
|
|
|
iFA88
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 04:32:17 PM |
|
Hy again!:) The five hex8 now work nice with 52% CPU use. But when i connect one hexC or hexB then the CPU spin up to 100% and the performance decreases on all board. While this the hex8 board red light pulses. Now i have two RPI. One for 2xHexB 1xHexC and for the other 5xHex7. Any idea? Thanks! I have RPI A, and when i use 5 Hex8 miner, then the cgminer process goes up to 100% cpu use and therefore decreases the performance. With 4 work it 70% and all is nice. Is there any solution to config less work to the cgminer? Thanks!
Sure --set-dif-to-one 0 Check my spelling though it is written in chnagelog. And make sure you are using latest version -you will know it when you see pool reject rate % in screen session
|
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 05:46:46 PM |
|
Hy again!:) The five hex8 now work nice with 52% CPU use. But when i connect one hexC or hexB then the CPU spin up to 100% and the performance decreases on all board. While this the hex8 board red light pulses. Now i have two RPI. One for 2xHexB 1xHexC and for the other 5xHex7. Any idea? Thanks! I have RPI A, and when i use 5 Hex8 miner, then the cgminer process goes up to 100% cpu use and therefore decreases the performance. With 4 work it 70% and all is nice. Is there any solution to config less work to the cgminer? Thanks!
Sure --set-dif-to-one 0 Check my spelling though it is written in chnagelog. And make sure you are using latest version -you will know it when you see pool reject rate % in screen session Get a TP-Link TL-3020 it kicks the ass of the RPi.
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 05:49:34 PM |
|
Hy again!:) The five hex8 now work nice with 52% CPU use. But when i connect one hexC or hexB then the CPU spin up to 100% and the performance decreases on all board. While this the hex8 board red light pulses. Now i have two RPI. One for 2xHexB 1xHexC and for the other 5xHex7. Any idea? Thanks! I have RPI A, and when i use 5 Hex8 miner, then the cgminer process goes up to 100% cpu use and therefore decreases the performance. With 4 work it 70% and all is nice. Is there any solution to config less work to the cgminer? Thanks!
Sure --set-dif-to-one 0 Check my spelling though it is written in chnagelog. And make sure you are using latest version -you will know it when you see pool reject rate % in screen session Get a TP-Link TL-3020 it kicks the ass of the RPi. Red light of hex 8 means it has no work. USB writes are taking too long for some reason. It seems some USB issue. Try with other hub or use the one I have recommended .... And finally tplink if all fails However if all is good at two pi's follow golden rule if it works do not touch it
|
|
|
|
Lucko
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 06:22:30 PM |
|
Is this normal?
Shipment number: ************* Date Operation Settlement 2014-03-06 17:12:10 Courier Pick-up SOFIA 2014-03-06 19:58:40 Received in Office SOFIA
It should be on the way by now right? Did they lost it already? Anyone else see the same?
cool they have some lag in data representing Confirmed, as far as I'm concerned their tracking page was updated yesterday night and I receive the package today... Well that was not the case in my case. Now I see it still in SOFIA in DPD HUB... Got DPD number. So at that speed I'm not sure when I will get it... 03/07/2014 18:44 DPD data centre Additional information Shipment data transmitted 03/07/2014 19:39 0068 Sofia (BG) Hub scan SI • 0066 160 101 It would be the same if we would use UPS today... Probably batter since it would be deliverd same day it get to Slovenia not next day as it is in case of DPD. Where did they get Speedy name...
|
|
|
|
eestimees
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 07:54:00 PM |
|
What I'm missing here: cgminer version 4.0.0 - Started: [2014-03-07 21:50:13] ------------------------------------------------------------------------------------------ (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m ST: 2 SS: 0 NB: 2 LW: 187 GF: 0 RF: 0 Connected to xxx.btcguild.com diff 256 with stratum as user xxx Block: 89975df5... Diff:3.82G Started: [21:51:29] Best share: 0 ------------------------------------------------------------------------------------------ [U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit 000: HEX8 0: 260 1000/ 800mV | 0.000/ 0.000h/s | A:0 R:0/0.00% HW:0/0.00% WU:0.0/m ------------------------------------------------------------------------------------------ [2014-03-07 21:50:11] Started cgminer 4.0.0 [2014-03-07 21:50:12] Probing for an alive pool [2014-03-07 21:50:13] Pool 0 difficulty changed to 2 [2014-03-07 21:50:13] Pool 0 difficulty changed to 256 [2014-03-07 21:50:13] Network diff set to 3.82G [2014-03-07 21:50:18] API running in IP access mode on port 4028 (11) [2014-03-07 21:51:29] Stratum from pool 0 detected new block
[STATS0] => ( [STATS] => 0 [ID] => HEX80 [Enabled] => Y [Status] => Alive [Elapsed] => 40 [MHS 5s] => 0.000 [MHS av] => 0.000 [Hardware Errors] => 0 [Hardware Errors%] => 0.0000 [USB Read Errors] => 0 [USB Write Errors] => 0 [USB Reset Count] => 0 [Last Share Time] => 0 [Chip Count] => 8 [Frequency] => 260 [Core Voltage] => 1000 [PIC Voltage Readings] => 800 [Chip1 Nonces] => 0 [Chip1 Engines] => 0 [Chip1 Dupes] => 0 [Chip2 Nonces] => 0 [Chip2 Engines] => 0 [Chip2 Dupes] => 0 [Chip3 Nonces] => 0 [Chip3 Engines] => 0 [Chip3 Dupes] => 0 [Chip4 Nonces] => 0 [Chip4 Engines] => 0 [Chip4 Dupes] => 0 [Chip5 Nonces] => 0 [Chip5 Engines] => 0 [Chip5 Dupes] => 0 [Chip6 Nonces] => 0 [Chip6 Engines] => 0 [Chip6 Dupes] => 0 [Chip7 Nonces] => 0 [Chip7 Engines] => 0 [Chip7 Dupes] => 0 [Chip8 Nonces] => 0 [Chip8 Engines] => 0 [Chip8 Dupes] => 0 cgminer monitor keeps restartin cgminer, and not hashing a thing.. using router MR3020
|
— eestimees
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 07:58:23 PM |
|
What I'm missing here:
cgminer monitor keeps restartin cgminer, and not hashing a thing.. using router MR3020
Did you change "Handle USB detect errors as (Default: hexA)" to Hex8?
|
|
|
|
eestimees
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:06:09 PM |
|
What I'm missing here:
cgminer monitor keeps restartin cgminer, and not hashing a thing.. using router MR3020
Did you change "Handle USB detect errors as (Default: hexA)" to Hex8? yes, I did. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FZFUbDFQ.png&t=665&c=5InRlfST-pe-bw)
|
— eestimees
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:07:25 PM |
|
xxx.btcguild.com is not a reachable address.
|
|
|
|
eestimees
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:09:28 PM |
|
xxx.btcguild.com is not a reachable address.
it's not xxx it is changed before pasting it here. EDIT: it can connect to pool "Pool 0 difficulty changed to 256" as this comes from pool worker settings
|
— eestimees
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:11:34 PM |
|
xxx.btcguild.com is not a reachable address.
it's not xxx it is changed before pasting it here. EDIT: it can connect to pool "Pool 0 difficulty changed to 256" as this comes from pool worker settings That setting should be... eu-stratum.btcguild.com:3333 if you're in the EU.
|
|
|
|
eestimees
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:14:26 PM |
|
xxx.btcguild.com is not a reachable address.
it's not xxx it is changed before pasting it here. EDIT: it can connect to pool "Pool 0 difficulty changed to 256" as this comes from pool worker settings That setting should be... eu-stratum.btcguild.com:3333 if your're in the EU. that is not the case, but for your sake I can change it on not mask it with "xxx": cgminer version 4.0.0 - Started: [2014-03-07 22:13:10] ------------------------------------------------------------------------------------------ (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:0 WU:0.0/m ST: 2 SS: 0 NB: 1 LW: 93 GF: 0 RF: 0 Connected to eu-stratum.btcguild.com diff 2 with stratum as user xxx Block: 59ca2446... Diff:3.82G Started: [22:13:10] Best share: 0 ------------------------------------------------------------------------------------------ [U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit 000: HEX8 0: 260 1000/ 800mV | 0.000/ 0.000h/s | A:0 R:0/0.00% HW:0/0.00% WU:0.0/m ------------------------------------------------------------------------------------------ [2014-03-07 22:12:11] Started cgminer 4.0.0 [2014-03-07 22:12:12] Probing for an alive pool [2014-03-07 22:12:22] Waiting for work to be available from pools. [2014-03-07 22:12:59] Pool 0 difficulty changed to 2 [2014-03-07 22:13:10] Network diff set to 3.82G [2014-03-07 22:13:10] Work available from pools, resuming. [2014-03-07 22:13:15] API running in IP access mode on port 4028 (11)
|
— eestimees
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:14:59 PM |
|
put something in all boxes even for hexu - 54
also please change dificulty seting to 0
also switch to stratum.btcguild.com:3333
|
|
|
|
eestimees
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:18:55 PM |
|
put something in all boxes even for hexu - 54
also please change dificulty seting to 0
also switch to stratum.btcguild.com:3333
also tried that before writing here: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FLEV9tKx.png&t=665&c=KQ3jkPPsQjW7Og)
|
— eestimees
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2014, 08:21:33 PM |
|
Is your Hex8A1 plugged directly into the TP-Link TL-3020 or through a USB hub?
Try plugging it in directly and see if it works. USB might be leaking power and power protection hub will stop it communicating.
|
|
|
|
|