|
1qaz
|
 |
May 13, 2015, 11:52:38 PM |
|
question to Vertoe you have any draft of "Technological RoadMap" for CACH ^ maybe its add price stability and why investors keep it ? one week you have enough to make a sketch and publish? I think it adds faith and patience to investors and not only them)
thx
|
|
|
|
|
|
Jesse Livermore
|
|
May 14, 2015, 04:18:08 AM |
|
question to Vertoe you have any draft of "Technological RoadMap" for CACH ^ maybe its add price stability and why investors keep it ? one week you have enough to make a sketch and publish? I think it adds faith and patience to investors and not only them)
thx
Agreed. This would help everyone. |
I own a DASH Masternode.... And you should too.
|
|
|
|
icelove
|
|
May 14, 2015, 04:35:21 AM |
|
can you share your bat ? Or GPG sign your binaries! Also, hashrates for Nf16? Do you have an interest, "roll out" a modified bin for "Red Baron" R9 ? ))) I've got an interest, although the code I have is currently one of two types - fast and unstable, or almost normal and rock solid stable.  Ah, very much like your typical furry.... ok ^  r9 270 (nonX) - You better result? Can you become a tester of the "miracle") the way I use cgminer-3.7.3-kalroth-sj0.03 it just does not work consistently, from time to time dead 1 or 2 or 3 of gpu , And it irritates much went through the different options for addressing errors but never found a solution ((((( |
|
|
|
|
|
1qaz
|
|
May 14, 2015, 07:16:55 AM
Last edit: May 14, 2015, 07:51:03 AM by 1qaz |
|
can you share your bat ? Or GPG sign your binaries! Also, hashrates for Nf16? Do you have an interest, "roll out" a modified bin for "Red Baron" R9 ? ))) I've got an interest, although the code I have is currently one of two types - fast and unstable, or almost normal and rock solid stable. Ah, very much like your typical furry.... ok ^ r9 270 (nonX) - You better result? Can you become a tester of the "miracle") the way I use cgminer-3.7.3-kalroth-sj0.03 it just does not work consistently, from time to time dead 1 or 2 or 3 of gpu , And it irritates much went through the different options for addressing errors but never found a solution ((((( I can not , because the settings are specific to each RIGS . But there is a key parameter that affects the stable operation you can see it on my screenshot, all other options in the standard A majority of cases, you just have to choose exactly what is right for you. and yes very important to work only this soft cgminer-3.7.3-kalroth-sj0.03 , though he is not stable but it's the best there is in the public , I have not achieved stable operation of several days, one or more of GPU go in DEATH see screenshot . It took me a long time to find a solution, but I have not found an answer, maybe it's probably bug cgminer-3.7.3-kalroth-sj0.03 or Scrypt , to understand the other algorithms x13,x11,cryptonote ..etc , my RIG work constantly stable , a very long time and no DEATH GPU. I agree with the opinion that the community needed modified soft for mining CACH. The only hope I have to work a talented w0lf , if his mercy, and he lay stability soft or bin in public.  |
|
|
|
|
|
1qaz
|
|
May 14, 2015, 12:39:49 PM |
|
can you share your bat ? Or GPG sign your binaries! Also, hashrates for Nf16? Do you have an interest, "roll out" a modified bin for "Red Baron" R9 ? ))) I've got an interest, although the code I have is currently one of two types - fast and unstable, or almost normal and rock solid stable. Ah, very much like your typical furry.... ok ^ r9 270 (nonX) - You better result? Can you become a tester of the "miracle") the way I use cgminer-3.7.3-kalroth-sj0.03 it just does not work consistently, from time to time dead 1 or 2 or 3 of gpu , And it irritates much went through the different options for addressing errors but never found a solution ((((( I can not , because the settings are specific to each RIGS . But there is a key parameter that affects the stable operation you can see it on my screenshot, all other options in the standard A majority of cases, you just have to choose exactly what is right for you. and yes very important to work only this soft cgminer-3.7.3-kalroth-sj0.03 , though he is not stable but it's the best there is in the public , I have not achieved stable operation of several days, one or more of GPU go in DEATH see screenshot . It took me a long time to find a solution, but I have not found an answer, maybe it's probably bug cgminer-3.7.3-kalroth-sj0.03 or Scrypt , to understand the other algorithms x13,x11,cryptonote ..etc , my RIG work constantly stable , a very long time and no DEATH GPU. I agree with the opinion that the community needed modified soft for mining CACH. The only hope I have to work a talented w0lf , if his mercy, and he lay stability soft or bin in public. You didn't mention what cards those are... stuff http://www.asus.com/Graphics_Cards/R9270DC2OC2GD5/ |
|
|
|
|
|
Thirtybird
|
|
May 14, 2015, 01:54:09 PM |
|
can you share your bat ? Or GPG sign your binaries! Also, hashrates for Nf16? Do you have an interest, "roll out" a modified bin for "Red Baron" R9 ? ))) I've got an interest, although the code I have is currently one of two types - fast and unstable, or almost normal and rock solid stable. Ah, very much like your typical furry.... ok ^ r9 270 (nonX) - You better result? Can you become a tester of the "miracle") the way I use cgminer-3.7.3-kalroth-sj0.03 it just does not work consistently, from time to time dead 1 or 2 or 3 of gpu , And it irritates much went through the different options for addressing errors but never found a solution ((((( I can not , because the settings are specific to each RIGS . But there is a key parameter that affects the stable operation you can see it on my screenshot, all other options in the standard A majority of cases, you just have to choose exactly what is right for you. and yes very important to work only this soft cgminer-3.7.3-kalroth-sj0.03 , though he is not stable but it's the best there is in the public , I have not achieved stable operation of several days, one or more of GPU go in DEATH see screenshot . It took me a long time to find a solution, but I have not found an answer, maybe it's probably bug cgminer-3.7.3-kalroth-sj0.03 or Scrypt , to understand the other algorithms x13,x11,cryptonote ..etc , my RIG work constantly stable , a very long time and no DEATH GPU. I agree with the opinion that the community needed modified soft for mining CACH. The only hope I have to work a talented w0lf , if his mercy, and he lay stability soft or bin in public. I'm not sure why you're telling everyone to only use that software that is not stable (I also disagree about it being the best choice too). I can only repeat myself so many times before I just let you all flounder with your low hashrates and enjoy mining more cachecoin with my hardware and miner...  If you're getting DEAD cards, chances are you've set your frequencies too high (my GPU 2 requires a lower frequency than the others). When I was mining YAC I wouldn't have to touch the machines for days - Now, I just simply restart the miner every couple of hours just in case there's a problem, but I can't remember the last time I found a dead miner. |
|
|
|
|
vertoe
|
|
May 15, 2015, 08:48:58 AM |
|
You are getting all the Proof-of-Fan-Blocks!!!1 |
|
|
|
|
|
Thirtybird
|
|
May 15, 2015, 01:54:49 PM |
|
You are getting all the Proof-of-Fan-Blocks!!!1 hmmm, haven't seen those in my wallet - I wonder how many confirmations those take  |
|
|
|
|
1qaz
|
|
May 15, 2015, 11:22:47 PM
Last edit: May 15, 2015, 11:39:53 PM by 1qaz |
|
impossible to work n-factor 16  system freezes on 1-2 s  Ps. at n-factor 15 cpu I no problem |
|
|
|
|
|
1qaz
|
|
May 16, 2015, 09:07:30 AM |
|
|
|
|
|
|
|
singula
|
|
May 16, 2015, 10:29:18 AM |
|
Machine stuck, restart failed, currently investigating and trying to start it again. |
Big brother is not watching you anymore. Big brother is telling you how to live.
|
|
|
|
singula
|
|
May 16, 2015, 11:49:56 AM |
|
The pool is now fully running again.
|
Big brother is not watching you anymore. Big brother is telling you how to live.
|
|
|
|
1qaz
|
|
May 16, 2015, 02:19:48 PM |
|
The pool is now fully running again.
thx , for the prompt decision |
|
|
|
|
|
Thirtybird
|
|
May 16, 2015, 04:06:40 PM |
|
impossible to work n-factor 16 system freezes on 1-2 s Ps. at n-factor 15 cpu I no problem Not familiar with your version of the miner, but if I were to guess, your hashing buffer is spilling over into dynamic memory (aka system memory), which can't fit it so it's spilling over into the paging file (in effect, you're hashing using your disk for memory - really SLOW!). I recommend running GPUz while firing up your miner and watching the memory sensors. Full guide to tuning your miner for scrypt chacha comes with YACMiner, or is availavle on the github here https://github.com/Thirtybird/YACMiner/blob/master/SCRYPT-README |
|
|
|
|
CODERsp
|
|
May 17, 2015, 08:59:07 AM |
|
How much CACHes I need to have in my wallet to get payments after 7 days? And what volume these payments are? Thanks.
|
|
|
|
|
|
1qaz
|
|
May 17, 2015, 12:37:44 PM
Last edit: May 17, 2015, 01:27:11 PM by 1qaz |
|
impossible to work n-factor 16 system freezes on 1-2 s Ps. at n-factor 15 cpu I no problem Not familiar with your version of the miner, but if I were to guess, your hashing buffer is spilling over into dynamic memory (aka system memory), which can't fit it so it's spilling over into the paging file (in effect, you're hashing using your disk for memory - really SLOW!). I recommend running GPUz while firing up your miner and watching the memory sensors. Full guide to tuning your miner for scrypt chacha comes with YACMiner, or is availavle on the github here https://github.com/Thirtybird/YACMiner/blob/master/SCRYPT-READMEby your logic, I should have been a 15 n-factor but there is a 15 n-factor was all very cool ^ system work fine (volume of memory and swap did not change) How much CACHes I need to have in my wallet to get payments after 7 days? And what volume these payments are? Thanks. 1 CACHe but difficulty for POS very high ^ you need more CACHes on you wallet ^ for good POS ) stake over 5k CACHe  |
|
|
|
|
|
Thirtybird
|
|
May 17, 2015, 03:21:53 PM |
|
by your logic, I should have been a 15 n-factor
but there is a 15 n-factor was all very cool ^ system work fine (volume of memory and swap did not change)
So, you didn't re-tune for NF=16? What kind of barbarian are you??! |
|
|
|
coins101
Legendary
 Offline
Activity: 1456
Merit: 1000
|
|
May 17, 2015, 06:05:12 PM
Last edit: May 17, 2015, 06:19:00 PM by coins101 |
|
Whats up with cryptsy  edit oh dear, we seem to have a glitch in the matrix
maintenance is being done. BigV @cryptsy42m Trades and withdrawals are turned off while we perform a swap of some hardware. Will have things back online shortly. twitter icon BigV@cryptsy 11 May Tether has been integrated. You can now deposit and withdrawal USD₮. @Tether_to |
|
|
|
|
|
gentamicin
|
|
May 18, 2015, 03:35:39 AM |
|
would a multipool paying out in cache be helpful ? I can add it, so those with asics can apply some buy pressure.
|
|
|
|
|
|
Jesse Livermore
|
|
May 18, 2015, 04:28:34 AM |
|
Alright Mr. or Ms. Vertoe, let's get this ANN plus roadmap going, eh?
|
I own a DASH Masternode.... And you should too.
|
|
|
|
