Vertcoin - First Scrypt N | First Stealth Address - Privacy without mixer

[jk_14]

Anyone noticed that we are on 666 page?

The devil noticed and instantly started his mining rig . I hope diff does not reach 666, too, now the devil is involved.

I hope it does, and then... to the moon 

[jk_14]

Now Vertcoin is Lyra2re and fullfills it's promised asic resistance.


How about getting it on one of the big exchanges (BTC-E for expample!). They are living behind the moon thinking FTC is the real thing!

+1

[jk_14]

By the way, is there a CPU miner?

i was asking the same. it looks that vertcoin is now GPU only.

actually it's not very bad = no botnet issues


from my early calculations, Vert is most profitable GPU coin right now...
for 750 Ti seems to be ~10 VTC from 1kWh

[-Blueraiven-]

Mining @ 640kh/s with 270x right now... Anyone using 270x here? Just want to know what would be the peak hashrate of it  

I have MSI R9 270 @ 585 KH/s.

But it is old 14.4 WHQL without any tweaks in miner software.

I'm using mod 14.6.. Maybe I'm doing fine with my speed atm.. Thanks Randywald 

[berbip]

Mining @ 640kh/s with 270x right now... Anyone using 270x here? Just want to know what would be the peak hashrate of it  

Please post your config,

Thanks

[naplam]

I'm trying to get a p2pool setup going using the Windows binaries from James. From what I can see, p2pool is running properly (I see it reporting on the blockchain), but I cannot connect to it with my other mining machine. I'm trying to use my regular vtc wallet address as my username, not the p2pool  address that appeared after install (actually I've tried both addresses).
"url" : "stratum+tcp://192.168.10.117:9171",

I  get errors related to 'json stratum auth failed' and i'm not sure why. What am I missing?

Any address should work, try someone else's p2pool node to make sure it's not because of your miner
for example: http://p2pool.crunchpool.com:9171/

since you are around 
It seems the hashrate isn't reported correctly on your p2pool, I tried it and I was getting things like 20kh/s
Does the +0.00something appended at the end of the vtc address still works ?
I tried it, and I wasn't getting any share at all

what's your real hashrate vs reported hashrate?

[jamesl22]

PLz update 1st post!!! scrypt N does not exist anymore!

Sadly we can't since the "vertcoin" account was banned. We tried contacting the moderators but haven't received a response.

[jamesl22]

I'm trying to get a p2pool setup going using the Windows binaries from James. From what I can see, p2pool is running properly (I see it reporting on the blockchain), but I cannot connect to it with my other mining machine. I'm trying to use my regular vtc wallet address as my username, not the p2pool  address that appeared after install (actually I've tried both addresses).
"url" : "stratum+tcp://192.168.10.117:9171",

I  get errors related to 'json stratum auth failed' and i'm not sure why. What am I missing?

Start sgminer with the "--no-extranonce" flag. You can edit the batch file to do this.

[poiuty]

p2pool diff not change
and /0+0.0016704 - not work

[poiuty]

jamesl22, why so much rejects on p2pool?



And why p2pool use much cpu?
3 miners (20Mh/s) = 100cpu load.

[hjurcic]

Please help,

is a new vertcoin miner working with w7 64bit?
I cannot configure it to work, tried at least 20 combinations, different configuration from this forum, none of them are working...


I'm using: sgminer-v5-Lyra2RE-RC1-WIN32
with this in my bat file:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe  -a lyra2 -o stratum+tcp://pool.verters.com:3333 -u xxx.xxx -p x

also tried:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe --kernel Lyra2RE -o stratum+tcp://pool.verters.com:4444 -u hjurcic.2 -p xxx

nothing works. When I start my bat file manually from cmd, it says all devices are disabled...
Can anyone help? Everything worked fine until change to Lyra2RE.

Also, I'm using Ati ASUS R9 280x

please someone help with configuring so it works

[BBristow79]

Very well done dev team. You've once again shown us what professional developers look like. Congratulations on the successful fork and new algo implementation. I can only imagine how much time it took you to get this all set up.


From me and I'm sure everyone else. THANK YOU!

[cnerd]

From me and I'm sure everyone else. THANK YOU!

Truly, a flawless fork. Thats not a thing you see every day, so Kudos to you all

[voephilis]

From me and I'm sure everyone else. THANK YOU!

Truly, a flawless fork. Thats not a thing you see every day, so Kudos to you all

yeah, very well done

happy to have a few VTC eggs in my basket

[cashclash]

Smooth sailing, flawless fork!
Thanks for the hard work and great job dev's

[jamesl22]

Please help,

is a new vertcoin miner working with w7 64bit?
I cannot configure it to work, tried at least 20 combinations, different configuration from this forum, none of them are working...


I'm using: sgminer-v5-Lyra2RE-RC1-WIN32
with this in my bat file:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe  -a lyra2 -o stratum+tcp://pool.verters.com:3333 -u xxx.xxx -p x

also tried:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe --kernel Lyra2RE -o stratum+tcp://pool.verters.com:4444 -u hjurcic.2 -p GSMGSM69

nothing works. When I start my bat file manually from cmd, it says all devices are disabled...
Can anyone help? Everything worked fine until change to Lyra2RE.

Also, I'm using Ati ASUS R9 280x

please someone help with configuring so it works

Can you screen cap your sgminer window so I can see the exact messages?

[hjurcic]

here is a pic..

https://drive.google.com/file/d/0B9-AOU6DTuTPX2F6cnFGYXhBOU0/view?usp=sharing

dont know how to paste it directly here

[sickfancy]

Hi djm34, there's a problem with your latest sgminer release. Pools report only half the hashrate of the miner. Just tried the original miner and it works better.

Strange.  Verters hashrate reported same as my hashrate but GMC reported only half.  I'm also using djm34's latest sgminer.

Tried solo but found block rejected so now @ verters.  Has anyone successfully solomined a block?

[Contra]

Please help,

is a new vertcoin miner working with w7 64bit?
I cannot configure it to work, tried at least 20 combinations, different configuration from this forum, none of them are working...


I'm using: sgminer-v5-Lyra2RE-RC1-WIN32
with this in my bat file:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe  -a lyra2 -o stratum+tcp://pool.verters.com:3333 -u xxx.xxx -p x

also tried:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe --kernel Lyra2RE -o stratum+tcp://pool.verters.com:4444 -u hjurcic.2 -p GSMGSM69

nothing works. When I start my bat file manually from cmd, it says all devices are disabled...
Can anyone help? Everything worked fine until change to Lyra2RE.

Also, I'm using Ati ASUS R9 280x

please someone help with configuring so it works

Can you screen cap your sgminer window so I can see the exact messages?

I have the same problem (W7x64, R9 280X-Catalyst 13.250..)

[replicator]

Please help,

is a new vertcoin miner working with w7 64bit?
I cannot configure it to work, tried at least 20 combinations, different configuration from this forum, none of them are working...


I'm using: sgminer-v5-Lyra2RE-RC1-WIN32
with this in my bat file:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe  -a lyra2 -o stratum+tcp://pool.verters.com:3333 -u xxx.xxx -p x

also tried:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe --kernel Lyra2RE -o stratum+tcp://pool.verters.com:4444 -u hjurcic.2 -p xxx

nothing works. When I start my bat file manually from cmd, it says all devices are disabled...
Can anyone help? Everything worked fine until change to Lyra2RE.

Also, I'm using Ati ASUS R9 280x

please someone help with configuring so it works

Had the same problem. Found a configuration on here for a R290 but tried it anyway on my 280x and it worked. Not optimized yet but at least producing some results.

{
"pools" : [
   {
      "url" : "stratum+tcp://pool.verters.com:4444",
      "user" : "xxx",
      "pass" : "x"
   }
]
,
"algorithm" : "Lyra2RE",
"intensity" : "15",
"gpu-threads" : "2",
"lookup-gap" : "2",
"worksize" : "128",
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"autofan" : true,
"kernel-path" : "/usr/local/bin"
}