[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[ezvm]

Give these a try:

ultracoinminer -o ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I used these exact settings and they worked out nicely. +1

Thanks for the help.

[Protagonus]

ultra.nitro.org Pool is 100% UpTime

Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in at high speed.

ultra.nitro.org is one of the earliest pools to find blocks, make payouts, and our hashrate is growing.

Are the pools getting accepted blocks fine now and everything?  I saw that this pool has a decent hash rate;  good job there.

just curious for now

[onepix]

Please help me I've got only Hardware error HW and that make me really made ...

[laterbreh]

Give these a try:

ultracoinminer -o ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I used these exact settings and they worked out nicely. +1

Thanks for the help.

Youre welcome bud! Have fun mining!

[sammy007]

Where is cgminer build?

[tanalith]

Where is cgminer build?

they named it ultraminer but it is just cgminer 3.7.2 adapted for scrypt-jane

[laterbreh]

Where is cgminer build?

Use ultracoinminer from the front page of the thread.

[noobyonekenobi]

what settings should i use for my r9 270x's?

[Protagonus]

Where is cgminer build?

Miner in OP

....
GPU Miner:

https://mega.co.nz/#!AwkFGQRR!LYwU5DXzLeVKyTXpVsNgNifre8ANFxHUVHwgt0Q-rZs

....

linux-gpu-mining source
https://mega.co.nz/#!p0kkRbbR!i5DqBPRL4WtDFU0d9uTlILwZxQui3EWHaJgaYcPA8L8

Please help me I've got only Hardware error HW and that make me really made ...

make sure you are running the miner shown in OP or above.  there is a sample .bat for mining included.

make your run conf or bat file with this:

ultracoinminer -o  stratum+tcp://mining pool:port -u user -p passw --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --lookup-gap 2 --thread-concurrency 8192 -g 2 -I 13 -w 256  --gpu-powertune -20 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale

you can fill in the pool address and your worker password.  Also, if you normally use other items to set;  (--auto-fan --gpu-fan  --temp-cutoff --temp-overheat --temp-target  --gpu-memclock  --gpu-engine) that is fine too.

Those settings should work well to start for 7950, 7970, 7990 and newer 280x-290x. Prolly good starting point for many cards, not sure.  


I'd prolly run a pool instead of solo.  I tried solo with no luck.  Seems there's a couple pools doing decent now.

http://ultra.nitro.org
http://utc.greekpool.eu

haven't tried since solo fail, but have been watching

[stuhlman]

ultra.nitro.org Pool is 100% UpTime

Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in at high speed.

ultra.nitro.org is one of the earliest pools to find blocks, make payouts, and our hashrate is growing.

Are the pools getting accepted blocks fine now and everything?  I saw that this pool has a decent hash rate;  good job there.

just curious for now

Yes it's working perfect, people getting blocks, getting paid, and everyone is happy. Took us few hours from launch time to iron out all the problems, but now its rolling 

[FoBoT]

Please help me I've got only Hardware error HW and that make me really made ...

lower your -I setting, or leave it off and it'll default to 8, once you get it working without HW errs ,then raise the -I until you get a  few HW, then back it off one
good luck

[brother3]

As far as I know... it doesn't matter WTF port you use in your conf and bat files... as long as they match in both, you can solo mine.

Did this for a few coins that forgot (conveniently) to list the default port in the OP and was still able to get solo coins.

I solo'd Cashcoin for a while getting block using port 11111 until I got the default port and changed it. Same with Chaincoin.

As long as the conf rpcport= and the :port in the batch file for the miner match... it works.

Thank you!  I learned something new today!!

[brother3]

Please help me I've got only Hardware error HW and that make me really made ...

Lower the intensity until there is no HW errors....HW errors should always be zero

[neozbiljni]

Give these a try:

ultracoinminer -o ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I used these exact settings and they worked out nicely. +1

Thanks for the help.

I used these exact settings and they worked out nicely. +1       FOR ME AS WELL!!!     THANKS......

[gristlelump]

Trying to solomine with modified CGminer reporting DIFF anywhere from 4 to 6

.BAT is

ultracoinminer --scrypt-jane -o 127.0.0.1:44101 -u xxxx -p xxxxx --thread-concurrency 8000 --worksize 256 --gpu-engine 800 --gpu-memclock 1300 --temp-target 86 --temp-overheat 90 --temp-cutoff 92 --gpu-fan 50-85 --auto-fan --intensity 15 --expiry 1 --queue 0 --scan-time 1 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

ultracoin.conf is

rpcuser=xxxxxx
rpcpassword=xxxxxxx
rpcallowip=127.0.0.1
rpcport=44101
port=44100
gen=0
server=1
listen=1


The modified Ultraminer in the OP is seems to be connecting to the wallet and I'm getting plenty of shares above target.  Diff is being reported anwhere from 4 to 6. I was under the impression that a share above target was an indication of a solved block but nothing is going into the wallet?  Am I doing something wrong?

[keepwalking1234]

want to buy UTC at rate 10K UTC=1BTC


PM me if you are interest. i will send btc first!

always on line！

[SCryptoMiners]

Trying to solomine with modified CGminer reporting DIFF anywhere from 4 to 6

.BAT is

ultracoinminer --scrypt-jane -o 127.0.0.1:44101 -u xxxx -p xxxxx --thread-concurrency 8000 --worksize 256 --gpu-engine 800 --gpu-memclock 1300 --temp-target 86 --temp-overheat 90 --temp-cutoff 92 --gpu-fan 50-85 --auto-fan --intensity 15 --expiry 1 --queue 0 --scan-time 1 --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

ultracoin.conf is

rpcuser=Pumpanddump
rpcpassword=Makememoney69
rpcallowip=127.0.0.1
rpcport=44101
port=44100
gen=0
server=1
listen=1


The modified Ultraminer in the OP is seems to be connecting to the wallet and I'm getting plenty of shares above target.  Diff is being reported anwhere from 4 to 6. I was under the impression that a share above target was an indication of a solved block but nothing is going into the wallet?  Am I doing something wrong?

Try using this value for the --sj-time setting: 1387769316

[keepwalking1234]

WTB UTC  10K=1btc

PM me if you interest

i am always on line.

[r0ach]

New 14.1 Catalyst gives 100% hardware errors with scrypt jane miner.  Works fine with normal Scrypt.

WTB UTC  10K=1btc

I think it would be 10x more profitable just mining Dogecoin rather than mining this and selling for that price.

[mephke]

are there any sites online yet that show the value of the ultracoin?