[ANN] LEASERIG.NET - rent&hire Quark hashing power!

[manifest23]

A couple people rented my rigs last night for an hour while they were offline. I've dealt with one of them (and gave them an extra 30 minutes on a one hour rental!) but I haven't heard from the other person yet. So if you rented my rig last night, send me a PM and let me know so we can work something out.

[BotwinBG]

Sent a 0.5 BTC deposit. Will bring up a few machines at around 2.8-4 Mh total in a few days, most likely during Wednesday.

[etayel]

Hi,
I have 10 rigs for hire, 2.25-2.6 mega each, I sent you an massage with no answer, how can I start? Offering for 0.025 btc/mega by the way.

[djeZo]

Hi,
I have 10 rigs for hire, 2.25-2.6 mega each, I sent you an massage with no answer, how can I start? Offering for 0.025 btc/mega by the way.

Read first post in this thread. Deposit is needed for newbies with no reputation. Considering quantity of the rigs you want on, I would say around 0.3 BTC would secure you.

[s4ndm4ns]

rent-a-rig.net

Looks like competition is about to go live as well...

[etayel]

ok, will send you right away, chow can i recover my password?

[sikboy]

djeZo    Anyway you can add a sort function. It will make our rigs "sikman" easier to manage and if some of the guys renting from us are following a provider, it will make it easier to locate and manage.

Great system, cant thank you enough.

[djeZo]

djeZo    Anyway you can add a sort function. It will make our rigs "sikman" easier to manage and if some of the guys renting from us are following a provider, it will make it easier to locate and manage.

Great system, cant thank you enough.

All sorting capabilities are on todo list.

[Zombie123]

Can anyone explain how to solo mine.. what change should I do in my conf file to solo mine remotely

[sikboy]

ok great. Im sure you have a Looooooong to do list.

Keep up the good work.

djeZo    Anyway you can add a sort function. It will make our rigs "sikman" easier to manage and if some of the guys renting from us are following a provider, it will make it easier to locate and manage.

Great system, cant thank you enough.

All sorting capabilities are on todo list.

[almightyruler]

Can anyone explain how to solo mine.. what change should I do in my conf file to solo mine remotely

Add the following to your client config:

rpcuser=username
rpcpassword=password
rpcallowip=*
rpcport=1234  (or whatever - any number between 1024 and 65535)

Select an appropriate username and password, enter that at leaserig and put in the URL as http://x.x.x.x:1234/ where x.x.x is your IP and 1234 is the port

Things to be aware of:

1. If your machine is not directly connected to the internet you pay have to forward the RPC port on your router
2. See my earlier post about getwork 60 second poll defaults causing the miner to work on stale blocks
3. See my earlier post about RPC granting access to your funds (cleaning out your wallet is as simple as sending an RPC command sendtoaddress <address> <amount>)

[almightyruler]

Suggestion for miners: please consider listing hire contracts shorter than 24 hours. People like myself will be willing to pay a higher rate for a shorter period, especially when experimenting with this service (and remote mining in general). If there's a good enough turnover of buyers (and so far there seems to be) you will net more per day by offering more than just a single 24 hour period option.

Perhaps the minimum hire period could also be listed on the mining rigs list. This should improve takeup, since buyers don't have to look at every individual rig page to figure out whether they offer several different options, or only 24h.

[frostamation]

Suggestion for miners: please consider listing hire contracts shorter than 24 hours. People like myself will be willing to pay a higher rate for a shorter period, especially when experimenting with this service (and remote mining in general). If there's a good enough turnover of buyers (and so far there seems to be) you will net more per day by offering more than just a single 24 hour period option.

Perhaps the minimum hire period could also be listed on the mining rigs list. This should improve takeup, since buyers don't have to look at every individual rig page to figure out whether they offer several different options, or only 24h.

I can vouch for this, i have mine setup for 1,2,4,6,8,10,12,18,24hours and i made more 2 days ago by a lot of people just renting my rig for 1 hour intervals. and of course the longer you rent the cheaper it gets for how i have mine setup.

[d0d0]

Did your site get hacked?

My rig was suddenly mining litecoin for some1 else..
Alive   stratum+tcp://eu.wemineltc.com:3333   tabakerica.smos27


What the hell....

[dima_a123]

I've just enabled my rig and for some reason my stability is ~4%. Can you please reset it?

[d0d0]

Oh I think you still have SMOS donation scrypts running.. PM me if you need any help removing them

[sikman]

Suggestion for miners: please consider listing hire contracts shorter than 24 hours. People like myself will be willing to pay a higher rate for a shorter period, especially when experimenting with this service (and remote mining in general). If there's a good enough turnover of buyers (and so far there seems to be) you will net more per day by offering more than just a single 24 hour period option.

Perhaps the minimum hire period could also be listed on the mining rigs list. This should improve takeup, since buyers don't have to look at every individual rig page to figure out whether they offer several different options, or only 24h.

I can vouch for this, i have mine setup for 1,2,4,6,8,10,12,18,24hours and i made more 2 days ago by a lot of people just renting my rig for 1 hour intervals. and of course the longer you rent the cheaper it gets for how i have mine setup.

Agree. All our machines now updated to allow  1, 3, 6, 12 & 24 Hours.

We still have 3 rigs available for lease that are not listed, this is due to the location where they are stored and unable to open up ports.

Rigs are as follows. Please PM to lease.

Name   Speed   (BTC/MH/day)
PC3     2.4          0.0305        
PC4     2.5          0.0305
PC5     2.4          0.0305

[sikman]

HELP!!!!

As with my post above, does anyone have any suggestions on how to enable 3 rigs that im unable to open up ports to work.

I can setup a router to forward once the API request comes to a particular machine....

Any suggestions appreciated.

[Squirreljester]

Wireless connection is generally a bad idea for mining rigs. You need fast responses to reduce stale shares. Wireless can give you spiking latencies and could be the cause of why your rig is sometimes displayed as OFF.

I will change "Stability" to "Connection stability", which this actually refers to.

I've never had an issue with it, but I'm adding 8GB more ram to the rig in a few days so I think it will be more stable with regard to your site. Connection wise it's 100% stable. I just have everything else clocked down so low that the added traffic from your site may have pushed the wireless too far on the machine itself.

You could have 2 ratings. Something like a ratio of declared speed to actual speed, since you seem to be monitoring both. And having a maintenance button that stopped monitoring so doing maintenance doesn't count towards our numbers would be nice too.

I've been doing tests, and I think the only way I'm going to be able to be stable on your site is to run a long ass cable out to where my rig is. I'll do that tomorrow. I believe I have one long enough, otherwise I'll have to make one. I should be stable by tomorrow... is there a way to reset my connection status number when I make the change tomorrow so I can start fresh again?

I never have any issues mining, just with the status on your site. Pings to the rig from my computer are 20ms and under, with a couple 400's here and there, and pings to google.com from the rig itself return 5 - 10ms, with a few random 500's, no drops. But I'll wire it in, that should fix all connection issues. It's possible Linux just doesn't work well over wireless, because no other device in the whole house, mobile, tablet, or desktop, ever have issues downloading, streaming, or online gaming. I even stream movies from my computer, over wifi, to my xbox, and it never skips once.

I blame Linux.

[Squirreljester]

HELP!!!!

As with my post above, does anyone have any suggestions on how to enable 3 rigs that im unable to open up ports to work.

I can setup a router to forward once the API request comes to a particular machine....

Any suggestions appreciated.

You could switch them to listen on a port that you know is open, like 80 or 443. Set your router to route incoming traffic from his IP, switch his port to 443 in the router (usually in the port forwarding section), and send the traffic to your rig's local IP. If you set up your rig to listen for that traffic on 443, it should grab it and be good to go.