[GUIDE] How to rent your rig on LEASERIG.NET - Scrypt & SHA256

[Brassguy]

Anyone else have a buyer who is connected to btc.mupool.com? I'm using the proxy with the 's' setting... and leaserig.net is reporting very low hashrates. For example my rigs are running at 393gh and 394gh... and leaserig is reporting 256gh and 245gh Ideas?

I would say bad luck. Except if the pool is unstable and your rigs are constantly reconnecting to it.

What was weird was I never saw a rig disconnect or pool disconnect.... just accepted shares flying by on the proxy...

[Tigggger]

New LeaseRigProxy:

v0.5c
- improved compatibility with some stratum pools
- sending "ping" data to keep connection alive

Just upgraded to this version and although it appeared to be working ok hashing, submitting shares and getting the speeds from the api, the leaserigs site was reporting it as OFF

Gone back to v0.5a and it's working again.

This is on a KNC Jupiter in case it's important.

[djeZo]

New LeaseRigProxy:

v0.5c
- improved compatibility with some stratum pools
- sending "ping" data to keep connection alive

Just upgraded to this version and although it appeared to be working ok hashing, submitting shares and getting the speeds from the api, the leaserigs site was reporting it as OFF

Gone back to v0.5a and it's working again.

This is on a KNC Jupiter in case it's important.

Will take a look into it. BTW, how long did you wait before switching back?

[djeZo]

Anyone else have a buyer who is connected to btc.mupool.com? I'm using the proxy with the 's' setting... and leaserig.net is reporting very low hashrates. For example my rigs are running at 393gh and 394gh... and leaserig is reporting 256gh and 245gh Ideas?

I would say bad luck. Except if the pool is unstable and your rigs are constantly reconnecting to it.

What was weird was I never saw a rig disconnect or pool disconnect.... just accepted shares flying by on the proxy...

Bad luck then.

[BuildTheFuture]

New LeaseRigProxy:

v0.5c
- improved compatibility with some stratum pools
- sending "ping" data to keep connection alive

Just upgraded to this version and although it appeared to be working ok hashing, submitting shares and getting the speeds from the api, the leaserigs site was reporting it as OFF

Gone back to v0.5a and it's working again.

This is on a KNC Jupiter in case it's important.

Will take a look into it. BTW, how long did you wait before switching back?

I am trying the c version now and also have the same problem. My ants on the site are constantly switching from OFF to full speed. Proxy log on my end shows no problems.. speed logging from API seems to be working.

[BuildTheFuture]

I need a copy of the b proxy if c can't be fixed. I didn't keep a copy of it.

[mikk2k2]

Having a bit of an nightmare setting this up. I have my GPU rig mining away though the speed isn't measure (Method A) So then I set up:

--api-listen --api-allow W:89.212.242.33 --api-port 7777

and added 7777 to the proxy run.bat.

I've turned win firewall off to eliminate that.

I keep getting the error:

WARNING: cgminer API (127.0.0.1:7777) Closing connection - is IP allowed?

HELP?!

Disconnects from the proxy too even without the API commands... Could be similar issue to above this post?

[Monty-Python]

Having a bit of an nightmare setting this up. I have my GPU rig mining away though the speed isn't measure (Method A) So then I set up:

--api-listen --api-allow W:89.212.242.33 --api-port 7777

and added 7777 to the proxy run.bat.

I've turned win firewall off to eliminate that.

I keep getting the error:

WARNING: cgminer API (127.0.0.1:7777) Closing connection - is IP allowed?

HELP?!

Disconnects from the proxy too even without the API commands... Could be similar issue to above this post?

Use localhost: 127.0.0.1 as IP address - should work, assuming that LRP and cgminer run on the same machine.

Code:

--api-listen --api-allow W:127.0.0.1 --api-port 7777

The other IP mentioned in the guide is for the second connection type.

[djeZo]

Having a bit of an nightmare setting this up. I have my GPU rig mining away though the speed isn't measure (Method A) So then I set up:

--api-listen --api-allow W:89.212.242.33 --api-port 7777

and added 7777 to the proxy run.bat.

I've turned win firewall off to eliminate that.

I keep getting the error:

WARNING: cgminer API (127.0.0.1:7777) Closing connection - is IP allowed?

HELP?!

Disconnects from the proxy too even without the API commands... Could be similar issue to above this post?

Use localhost: 127.0.0.1 as IP address - should work.

Yes.

New LRP is being tested as we speak. Prepare to upgrade it again.

[mikk2k2]

Worked a treat - thanks guys. No more disconnects either! Edit, drops every 20/30 secs


M

[djeZo]

Worked a treat - thanks guys. No more disconnects either! Edit, drops every 20/30 secs


M

Just testing new version... Wait 5min.

EDIT: Ok, looks like it is OK now, upgrade please.

v0.05d
- fixed ping issue from v0.05c

[mikk2k2]

Worked a treat - thanks guys. No more disconnects either! Edit, drops every 20/30 secs


M

Just testing new version... Wait 5min.

EDIT: Ok, looks like it is OK now, upgrade please.

v0.05d
- fixed ping issue from v0.05c

Working flawlessly! Fantastic job!

[djeZo]

Looks like there are no issues with eligius pool anymore. Just make sure you use latest 0.05d version of LRP.

[Monty-Python]

We can keep the pool.conf and the run.bat, right? ^^

[mikk2k2]

We can keep the pool.conf and the run.bat, right? ^^

Yep worked for me!

[WireIT]

Does anyone know how to setup antminers using the advanced method...I am stuck trying to do this api stuff.

I have not tried it as the LRP is working out for me, but check out the following link. It tells you were to make the API config changes.

https://bitcointalk.org/index.php?topic=499837.0

[mikk2k2]

Would it be possible to use p2p pools; im thinking not with the proxy?

[djeZo]

Would it be possible to use p2p pools; im thinking not with the proxy?

If the p2p pool is stratum, then yes.

[mikk2k2]

I just had two disconnects for some reason, any idea what might have caused them?

[djeZo]

I just had two disconnects for some reason, any idea what might have caused them?

Disconnects to what? Pool or LeaseRig?