[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s

[Easy2Mine]

UPS plane is still in rapist land.

[pjcltd]

This is what mine says

Location   Date   Local Time   Activity
Mumbai, India    23/01/2014    17:59   A flight delay occurred because of aircraft mechanical reasons.
23/01/2014    11:47   Released by Clearing Agency. Now in-transit
Mumbai, India    23/01/2014    12:44   Arrival Scan
Bangkok, Thailand    23/01/2014    9:43   Departure Scan
23/01/2014    5:43   Arrival Scan
Shenzhen, China    23/01/2014    3:55   Departure Scan
22/01/2014    18:13   Package data processed by brokerage Waiting for clearance
22/01/2014    18:13   Package data processed by brokerage Waiting for clearance / Released by Clearing Agency. Now in-transit
Shenzhen, China    23/01/2014    1:05   Export Scan
23/01/2014    0:10   Arrival Scan
Shenzhen, China    22/01/2014    23:50   Departure Scan
22/01/2014    23:38   Origin Scan
China    22/01/2014    3:03   Order Processed: Ready for UPS

Same as mine, cleared before transit in China, Cypers shipment was in transit before it was cleared.

Is that a good or a bad thing?

i would just how mean S1's are on that plane ?

[CYPER]

UPS plane is still in rapist land.

Make sure you check your ethernet ports for body fluids 

[pmorici]

I ordered and paid on the 22nd but haven't received any shipping confirmation yet and the BITMAIN contact information from their about page seems to have disappeared.  Should I be worried?

[CYPER]

I ordered and paid on the 22nd but haven't received any shipping confirmation yet and the BITMAIN contact information from their about page seems to have disappeared.  Should I be worried?

The disappearance of the contact info is not a good thing 
Now I am worried.

[klondike_bar]

add one to the list of machines with terrible fans.

no dust buildup like some of the other units people got, but the fan wont run at low speeds and needed a 'flick' to get it spinning once the miner was in operation, and is making a tremendous amount of 'clicking' noise.

I assume the blades are slightly nicking the hexscrews that hold the frame to the heatsink because i've had that issue with installing secondary fans before - though im not sure why this is the only unit out of 5 ive had where this is happening on the stock fan.

*for reference, my PCB is dated '2013/12/1' and has yellow/black power terminals and PCI connectors. I imagine that bitmain likely used it in their farm previously*

I loosened out the fan screws slightly to try and imporve the gap a bit but it doesnt seem to have eliminated the strange sound.

[Abraxas601]

Hey, all that dust is just proof that it's been thoroughly tested 

But ya, out of the 2 I received yesterday, one had dust bunnies all over the exhaust side of the fan and heat sink.  My other one had a slight coating of dust but not as bad as the first one.

[pedrosoft]

I'm waiting for email with tracking info of 21th order

[miter_myles]

Ordered one more on the 22nd, MyUPS already has it listed to be delivered by end of day Monday (27 Jan)..

No word back yet on my support request regarding broken fan.

[pedrosoft]

Bitmine promised me with pm that my order is being shipped today. NO email yet

[cyberspaced]

@Bitmain

Why do you answer mails too late to check replies? We had an agreement but you did not honor your part, now UPS is closed for the weekend and not a word from you!!
Please give me my refund as promised several times... !!!!!!

The Ant has been with UPS for a week, a real waste of time!! WAKE UP Bitmain or is it LITB that I should be talking to?

[s1lverbox]

I bet in mumbai they mining with our gear. Anyone can check about hashpower from mumbai? Maybe a location?

Would be funny to see like 100 miners connected in airplane to make few extra BTC for crew of UPS.
We need an insider there to give details. Any indian person present on this thread which lives in mumbai?

[mjadid]

Today there ıs not any update in this India shipment problem  i hope we can see something in the next few hours...

[DimensionsOfHell]

Just wanted to chime in for anyone that wants an easier way to over clock the AntMiners and are not too familiar with PuTTY:

Use WinSCP. I've used it to overclock my AntMiners, it takes about 30 secs for the whole procedure, and it's all GUI, so no need to learn cmd.

1.) Download/Install/Open WinSCP      http://winscp.net/eng/download.php
2.) Click on 'New Site' and change the protocol to "SCP" from the drop down menu
3.) Put in your miner information(IP address/username/password) and you will see all the folders and files in the miner.
4.) Navigate to  .../etc/config/
5.) Open file called asic-freq
6.) Copy/paste the following:

Code:

package 'cgminer'

config 'asic-freq' 'default'
        option 'freq_value'      '4f81'        #400M
        option 'chip_freq'     '400'
        option 'timeout'       '35'

        #option 'freq_value'      '4e81'        #375M
        #option 'chip_freq'     '375'
        #option 'timeout'       '37'

        #option 'freq_value'     '4d81'  #350M
        #option 'chip_freq'      '350'
        #option 'timeout'        '40'

        #option 'freq_value'    '4c81'  #325M
        #option 'chip_freq'     '325'
        #option 'timeout'       '40'

        #option 'freq_value'    '0b81'  #300M
        #option 'chip_freq'     '300'
        #option 'timeout'       '45'

        #option 'freq_value'    '0981'  #250M
        #option 'chip_freq'     '250'
        #option 'timeout'       '55'

        #option 'freq_value'    '0781'  #200M
        #option 'chip_freq'     '200'
        #option 'timeout'       '70'

        #option 'freq_value'    '4f02'  #193M
        #option 'chip_freq'     '193'
        #option 'timeout'       '70'

7.) Save file and close. It'll take about another 5-10 seconds for WinSCP to upload the file automatically.
8.) Close WinSCP after uploading is complete, and restart miner.

I have my chip frequency set to 375Mhz instead of 400. I have too many things heating up the small room I have everything in, and 400Mhz makes everything so much hotter.





_{Original instruction set for overclock: https://bitcointalk.org/index.php?topic=348327.0}

[sbfree]

CAN WE STILL PLACE AN ORDER AND MAKE CUT OFF BEFORE CHINESE NEW YEAR!! ANYONE THAT TRULY KNOWS!!

[CYPER]

CAN WE STILL PLACE AN ORDER AND MAKE CUT OFF BEFORE CHINESE NEW YEAR!! ANYONE THAT TRULY KNOWS!!

Check last page, where you will find the answer directly from Bitmain

[Easy2Mine]

Our Antminers are still being gang raped in Mumbai. 
Those indian bastards are doing burnin test at the moment.

[Jacko]

UPS will tomorrow announce that due to other business interests they are retiring from the parcel delivery business

[CYPER]

Our Antminers are still being gang raped in Mumbai. 
Those indian bastards are doing burnin test at the moment.

I am mostly certain they are flying now and when they are scanned in Europe (most probably in Koln, Germany) the status will reflect that.

Btw isn't anyone worried that Bitmain removed the contact information from their website?

[Easy2Mine]

They probably removed it because people are spamming their mailbox or send someone to stalk their office.