Z9 list of working pools/Fork updates

[Dagamus(NM)]

Thank you

[htautosjay]

I can confirm that PPNLS payouts with Antpool is not working but PPS is. Also my Freq is 643 & I'm getting an average of 15.4ksol

15.4 KSol = Almost my 3 rigs full of 1080TI and Titan Xp, but less power efficient :-)

Significantly, I'd estimate that overclocked z9 is running at under 500W.

It is using 387 watts at 15.4 ksol

Antminer Z9 mini running on 387 watts, overclocked to Freq 643? Are you sure? In that case I can connect 4 miners to EVGA 1600 P2 power supply and overclock them to 643 freq?

Hay buddy, my Z9 hasn't arrived yet.. have you got it working overclocked at 643?. what pool are you using?... Cheers

Was using Antpool but been using https://bitcoin-gold.miningpoolhub.com/

These are my payouts for BTC Gold

2018-06-13 (UTC)   0.86924967
2018-06-12 (UTC)   0.87895445
2018-06-11 (UTC)   0.71100779
2018-06-10 (UTC)   0.92915138
2018-06-09 (UTC)   0.54980312
2018-06-08 (UTC)   0.81474208
2018-06-07 (UTC)   0.62056684

Hay buddy can you tell me what URL to use for the Z9 to mine BTCG please? and what pool and wallet you think is best to use.
Thanks

[SlushPool official]

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

[htautosjay]

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

I have one on the way if no one steps us first you can use mine..should be with me Tuesday 26th June

BITMAIN Order Shipped
Order ID: 003201805040765567
Date: 2018-05-04 18:02:08
Total: 0.23129421 BTC
Payment method: Bitcoin Payment
Order Details
Antminer Z9 mini × 1

[mgoz]

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

Contacted. Should have mine tomorrow.

[DropdCoin]

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

Just tested an emailed my feedback.

[not.you]

If NiceHash isn't working - I think I could point to the MiningPoolHub equihash autoswitching port (17023), set my autoexchange preference to BTC... and end up with the same thing? It should mine the most profitable equihash coin MPH supports (ZCL/BTG/ZEC/ZEN) and keep slowly converting it to Bitcoin?

The only hitch for this plan (same plan I have btw) is that MPH uses bittrex to auto-exchange BTG and the bittrex BTG wallet has been down for like more than a month.  So for BTG specifically, if the MPH auto-switch port is mining it at all, you may want to not set it for auto-exchange and either manually exchange it on cryptopia yourself or accumulate it and wait for bittrex (don't hold your breath).

[Dilld]

Any Komodo mining pools?

[topgeek]

Any updates with Slush?

We are still looking for a proud owner of Z9 or A9 that would be willing to help us with debugging.

We would really appreciate your help and we only need few minutes of your work.

Please contact us here and we will let you know what to do: https://support.slushpool.com/conversation/new

Thank you!

I have one available and sent you a note.
cheers.

Just tested slushpool with ZEC and 100% rejected.
(I use slushpool for BTC).

[mgoz]

Just tested slushpool with ZEC and 100% rejected.

They want testing done on their debug pool and then notify them after.
dbg.stratum.slushpool.com:4444

[suchmoon]

Just tested slushpool with ZEC and 100% rejected.

They want testing done on their debug pool and then notify them after.
dbg.stratum.slushpool.com:4444

They should go to MRR and rent a rig, not ask for charity.

[crazydane]

Got my 1st unit today and it is running happily OC'ed to 656, no HW errors and temps in the low 60's.

Mining BTG on MPH with 0.00% invalids after a couple of hours.

Tried NH, but as others have reported, 50%+ rejects.

[Kalyst69]

Some good news from Nanopool :

Please note, we have already ordered Z9 recently which is going to be tested as soon as it is received. Meaning Z9 support could be added in the near future.

Kindly stay updated by following us on twitter:  @nanopool_org

[htautosjay]

Got my 1st unit today and it is running happily OC'ed to 656, no HW errors and temps in the low 60's.

Mining BTG on MPH with 0.00% invalids after a couple of hours.

Tried NH, but as others have reported, 50%+ rejects.

Sounds great,  What wallet are you using to bank BTCG?..And exchange it for BTC?..
Thanks

[greyday]

Got my 1st unit today and it is running happily OC'ed to 656, no HW errors and temps in the low 60's.

Mining BTG on MPH with 0.00% invalids after a couple of hours.

Tried NH, but as others have reported, 50%+ rejects.

Sounds great,  What wallet are you using to bank BTCG?..And exchange it for BTC?..
Thanks

I use my Trezor (i have the first version, but BTG has been supported for a while now, so any Trezor will work). There are a ton out there that do, though, including Coinomi, which I use on my iPhone for a bunch of my smaller altcoins...

[blf0005]

Hi everyone, I received my miner today and wanted to add my results thus far.

I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.

Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!

Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.

[shaninium]

Hi everyone, I received my miner today and wanted to add my results thus far.

I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.

Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!

Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.

Thats good, someone said they were getting 16kh at 380watts, you found a better combination, are you in a cold climate?

[greyday]

Hi everyone, I received my miner today and wanted to add my results thus far.

I had the miner working on the Suprnova Zec pool with no issues and then switched over to MPH mining BTG. I am currently overclocked to frequency of 631 getting 15,360 sol/s and drawing 327 watts at the wall.

Compared to my GPU rig pulling over 1000 and getting a little over 3,000 sol that is extremely impressive. The question now is just how long it will last before becoming an expensive Brick!

Side note, I could not get the Suprnova BTG pool working for whatever reason but the Zec pool worked just fine.

Thats good, someone said they were getting 16kh at 380watts, you found a better combination, are you in a cold climate?

16K is about as high as I've been able to push mine with a lot of experimenting, it starts dropping when I push it further. Also it's not consistent pool to pool or even over time, but the pool hashrate is more important anyway, and that stays constant (though, of course, slightly lower).

[greyday]

Updated and added confirmed fork info to the main post. Please feel free to add links to any announcements to this thread as well and I will update the main as best as I can.

[acidrush]

Hello guys,

Need some help. How exactly do i configure my Z9 to mine BTG on mining pool hub?

i seem to be getting about 2/3 discarded and 1/3 accepted

thank you!