TheRealCashen
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 25, 2018, 11:25:46 PM |
|
I actually glad NH does not support the Z9. 51% attacks would be out of control.
|
|
|
|
Eyedol-X
|
|
June 25, 2018, 11:28:11 PM |
|
I'll test mine on Prohashing when I get it but I'm waiting on tracking
Someone posted over on Prohashing, looks like the Z9 is not working there at this time. Just saw an updated post on Prohashing, it is reported to be working using the algo specific equihash port 3336. I will have my Z9 soon and will confirm. I suspect this should work on 3336 because my GPU miners work better on the dedicated port. I can confirm Z9 works on Prohashing.com with port 3336
|
|
|
|
mfurman
Jr. Member
Offline
Activity: 173
Merit: 2
|
|
June 26, 2018, 03:08:55 AM |
|
Flypool has a message: "Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool". How are those mining on this pool dealing with the issue. please?
|
|
|
|
CCRiggz
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 26, 2018, 06:06:46 AM |
|
NOTE--now including more info on forks as I get it/you post it. Any coin not posted here check in the reddit thread at the bottom, I am only adding info on DEFINITE fork dates. Assume most coins will fork eventually, other than Komodo.
NOTE--added a field for untested so any Z9 owners who want to test can give a whirl. Pool runners or just general curious users can post pools they want to test in this thread and testers can respond, I will update as best I can...
Running for about 10 hours on Luckpool.net and everything is working perfectly. From the chatter on the site and a number of links provided there are many Z9s running well on the pool ranging from 15-17k SOLs
|
|
|
|
KoiMundi
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 26, 2018, 06:07:04 AM |
|
Hi, Do you mind sharing your setup of Awesome Miner? Would really love to use the software, as I purchased it, but not sure how to setup a pool, and make it switch between the most profitable coin to mine. Note I have two miners. Would really be great! Thanks, KoiMundi
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 26, 2018, 08:23:54 AM |
|
Been running for almost 30hrs straight @ 750 Mhz now, seems to handle it fine. Stable at 62c. Pool reports average of 17.5 kSol/s! Hi, Do you mind sharing your setup of Awesome Miner? Would really love to use the software, as I purchased it, but not sure how to setup a pool, and make it switch between the most profitable coin to mine. Note I have two miners. Would really be great! Thanks, KoiMundi Actually you dont need to add any pools in Awesome Miner, if 3 pools is enough you can just use Miner`s pool config. Awesome miner must have privileged access to your Z9 in order for it to be able to profit switch. Ill help you through that. Join my discord server and send me a DM, easier there. https://discord.gg/epFf8bF - You can find me with same nickname.
|
|
|
|
Joykiller
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 26, 2018, 09:28:53 AM |
|
Everyone post their PCB and Chip TEMP's for the Z9 also mention if you OC'ed or not. And what kind of exhaust systems you might be using? I'm curious just set up mine and stock fanspeed was getting around 60c
|
|
|
|
microtechies
Newbie
Offline
Activity: 34
Merit: 0
|
|
June 26, 2018, 10:33:38 AM |
|
I'll test mine on Prohashing when I get it but I'm waiting on tracking
Someone posted over on Prohashing, looks like the Z9 is not working there at this time. Just saw an updated post on Prohashing, it is reported to be working using the algo specific equihash port 3336. I will have my Z9 soon and will confirm. I suspect this should work on 3336 because my GPU miners work better on the dedicated port. I can confirm Z9 works on Prohashing.com with port 3336 Can I ask what settings you are using because I still can't get it working with port 3336
|
|
|
|
onyx369
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 26, 2018, 10:38:11 AM |
|
What to Mine predicts 1.6 - 1.9 zencash per day currently based upon 15000 sol/s
Is anyone actually getting that? Ifso... what pools are you using?
Ive tried zhash and supranova.... and while they both work.... I'm likely pulling 1 zen per day at 15000 sols... which is certainly less then predicted...
Anyone with an Z9mini care to post their daily haul of Zen for comparison and what pool?
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 26, 2018, 12:22:19 PM |
|
Made an guide on how to setup profit switching with Awesome Miner for Z9/A9`s: https://bitcointalk.org/index.php?topic=4547429.new#new@grayday can you update first post with the following new coins available on Powermining? ZEN, ZCL, ZEL, BTCP, VOT
|
|
|
|
Sprucemoose78
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 26, 2018, 01:19:10 PM |
|
Flypool has a message: "Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool". How are those mining on this pool dealing with the issue. please?
Just mine to a t-address, works brilliantly. I don't know if any pool supports mining to z-addresses, as such transactions are pretty resource demanding. The Sapling upgrade, scheduled for later this year (hopefully) may change that.
|
|
|
|
Sprucemoose78
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 26, 2018, 01:25:56 PM |
|
Just curious what temperatures would be considered "safe". I received my Z9 mini yesterday, and I bumped it up to 750MHz almost right away. It mines at Flypool at an average of 16.4kSol/s (measured poolside). Rejected shares at appr. 0.4% and stale shares at 0.2% according to the miner interface. Now, this time of year it gets pretty hot outside, and I have the asic in my garage, which is even hotter. Chip temps are 74, 76 and 78 degrees (midday) while PCB-temp is 59, 62 and 63 degrees. Last evening/night the chip-temps were below 70 degrees. No registered HW errors.
Back down on the overclock or continue to let it rip?
|
|
|
|
saltyminer
Copper Member
Newbie
Offline
Activity: 64
Merit: 0
www.bitpoolmining.com
|
|
June 26, 2018, 01:52:42 PM |
|
Pool operator here at https://bitpoolmining.com. Will someone kindly please test our KMD pool, I will gladly give a little reward for your time. Still waiting on our Z9 and need someone to help us test. stratum+tcp://us-east.kmd.bitpoolmining.com port: 3036 username: KMD address pwd = x I really appreciate it, thanks!
|
|
|
|
mattaero
Jr. Member
Offline
Activity: 178
Merit: 2
|
|
June 26, 2018, 03:11:19 PM |
|
Just curious what temperatures would be considered "safe". I received my Z9 mini yesterday, and I bumped it up to 750MHz almost right away. It mines at Flypool at an average of 16.4kSol/s (measured poolside). Rejected shares at appr. 0.4% and stale shares at 0.2% according to the miner interface. Now, this time of year it gets pretty hot outside, and I have the asic in my garage, which is even hotter. Chip temps are 74, 76 and 78 degrees (midday) while PCB-temp is 59, 62 and 63 degrees. Last evening/night the chip-temps were below 70 degrees. No registered HW errors.
Back down on the overclock or continue to let it rip?
From what I have read and even from my experience with GPUs sub 80 is your best bet. The higher it goes the more likely there will be errors and you will shorten the life span. Personally, I try and keep them at the mid to low 70s because I don't want to be unlucky and have to crap out in 8 months or something. I am also going to buy a second Delta fan to augment it. These temps are very good considering there is only the one fan!
|
|
|
|
jakebot
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 26, 2018, 03:13:42 PM |
|
Just curious what temperatures would be considered "safe". I received my Z9 mini yesterday, and I bumped it up to 750MHz almost right away. It mines at Flypool at an average of 16.4kSol/s (measured poolside). Rejected shares at appr. 0.4% and stale shares at 0.2% according to the miner interface. Now, this time of year it gets pretty hot outside, and I have the asic in my garage, which is even hotter. Chip temps are 74, 76 and 78 degrees (midday) while PCB-temp is 59, 62 and 63 degrees. Last evening/night the chip-temps were below 70 degrees. No registered HW errors.
Back down on the overclock or continue to let it rip?
From what I have read and even from my experience with GPUs sub 80 is your best bet. The higher it goes the more likely there will be errors and you will shorten the life span. Personally, I try and keep them at the mid to low 70s because I don't want to be unlucky and have to crap out in 8 months or something. I am also going to buy a second Delta fan to augment it. These temps are very good considering there is only the one fan! I don't have a komodo wallet yet but I will point it there if you give me a wallet address
|
|
|
|
jakebot
Newbie
Offline
Activity: 21
Merit: 0
|
|
June 26, 2018, 03:20:22 PM |
|
I might be not looking right at Flypool help files but what is exactly their setup for ZEC, please? I mean, is it just:
Server asia1-zcash.flypool.org eu1-zcash.flypool.org us1-zcash.flypool.org Stratum Port 3333 Alt. Stratum Port 13333 Encrypted Stratum Portt 3443 (Encrypted stratum is currently only supported by the Claymore and Optiminer miner) Username Your Zcash Address e.g.: t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51 Password Leave empty or enter your custom share difficulty (default difficulty is 2000)
or more elaborate
They did not respond to my question, yet. Thank you.
stratum+tcp://us1-zcash.flypool.org:3333 walletaddress.workername blank
|
|
|
|
mattaero
Jr. Member
Offline
Activity: 178
Merit: 2
|
|
June 26, 2018, 03:23:26 PM |
|
Does anyone know if powerminingpool is the only one that lets the Z9 mine Votecoin?
I appear to be the only one mining it on there... are there any other pools with Votecoin?
|
|
|
|
|
not.you
Legendary
Offline
Activity: 1726
Merit: 1018
|
|
June 26, 2018, 03:40:51 PM |
|
You can add viabtc to the list of working pools.
|
|
|
|
saltyminer
Copper Member
Newbie
Offline
Activity: 64
Merit: 0
www.bitpoolmining.com
|
|
June 26, 2018, 04:24:38 PM |
|
Thanks jakebot, I just sent you 10KMD for testing. I can see your shares coming in fine and the website is working as expected. If anyone else is will to test I will also give a 10KMD reward, I am trying to do some testing on the efficiency of the pool with asics and any help would be really awesome.
|
|
|
|
|