Z9 list of working pools/Fork updates

[acidrush]

wonder if new coins will be created when bitcoin gold forks.

[loose_concetrate]

Buy an additional Z9 Mini for 676$ or not to buy!? Hard decision.

[mfurman]

First of all, the metal fan protection is removed, secondly - it somehow works. I mean temperature drops by ~ 2 degrees and noise drops ~6 dB.
I actually bought it on ebay for another Antminer.

I dont really understand thermodynamics and all but is true that your ambiance temp is below 20c ?, this kind of extension modification not working for tropical climate (ambient above 25c), it only make it hotter (by 2-3 or more in celcius, on s9)
As for the noice reduction,  isn it because of projected sound ? The longer the cone will make lower noise but if you measure it on the projection area (in front of the cone) its the same db produced

Anyone tried to put additional exhaust fan on z9 mini ?

It works for me. The temperature is not going up. Today, we have 34C outside (28-29C in the room where this Z9 is located  (together with 20 GPUs)

Can you post a picture?  I'm in a similar environment.

I did, please look a few posts earlier. Here it is again:

[mfurman]

Buy an additional Z9 Mini for 676$ or not to buy!? Hard decision.

I thought of that as well and I decided to get the second batch Z9 yesterday

[loose_concetrate]

First of all, the metal fan protection is removed, secondly - it somehow works. I mean temperature drops by ~ 2 degrees and noise drops ~6 dB.
I actually bought it on ebay for another Antminer.

I dont really understand thermodynamics and all but is true that your ambiance temp is below 20c ?, this kind of extension modification not working for tropical climate (ambient above 25c), it only make it hotter (by 2-3 or more in celcius, on s9)
As for the noice reduction,  isn it because of projected sound ? The longer the cone will make lower noise but if you measure it on the projection area (in front of the cone) its the same db produced

Anyone tried to put additional exhaust fan on z9 mini ?

It works for me. The temperature is not going up. Today, we have 34C outside (28-29C in the room where this Z9 is located  (together with 20 GPUs)

Can you post a picture?  I'm in a similar environment.

I did, please look a few posts earlier. Here it is again:

https://imgur.com/a/Deg69Ed

I think he is asking for a picture with it on the miner and hooked up. Would be cool to see.

[mfurman]

First of all, the metal fan protection is removed, secondly - it somehow works. I mean temperature drops by ~ 2 degrees and noise drops ~6 dB.
I actually bought it on ebay for another Antminer.

I dont really understand thermodynamics and all but is true that your ambiance temp is below 20c ?, this kind of extension modification not working for tropical climate (ambient above 25c), it only make it hotter (by 2-3 or more in celcius, on s9)
As for the noice reduction,  isn it because of projected sound ? The longer the cone will make lower noise but if you measure it on the projection area (in front of the cone) its the same db produced

Anyone tried to put additional exhaust fan on z9 mini ?

It works for me. The temperature is not going up. Today, we have 34C outside (28-29C in the room where this Z9 is located  (together with 20 GPUs)

Can you post a picture?  I'm in a similar environment.

I did, please look a few posts earlier. Here it is again:

I think he is asking for a picture with it on the miner and hooked up. Would be cool to see.

Here it is:

[loose_concetrate]

First of all, the metal fan protection is removed, secondly - it somehow works. I mean temperature drops by ~ 2 degrees and noise drops ~6 dB.
I actually bought it on ebay for another Antminer.

I dont really understand thermodynamics and all but is true that your ambiance temp is below 20c ?, this kind of extension modification not working for tropical climate (ambient above 25c), it only make it hotter (by 2-3 or more in celcius, on s9)
As for the noice reduction,  isn it because of projected sound ? The longer the cone will make lower noise but if you measure it on the projection area (in front of the cone) its the same db produced

Anyone tried to put additional exhaust fan on z9 mini ?

It works for me. The temperature is not going up. Today, we have 34C outside (28-29C in the room where this Z9 is located  (together with 20 GPUs)

Can you post a picture?  I'm in a similar environment.

I did, please look a few posts earlier. Here it is again:

https://imgur.com/a/Deg69Ed

I think he is asking for a picture with it on the miner and hooked up. Would be cool to see.

Here it is:

https://imgur.com/a/C5MzzLc

Wow, I didn't realize you had it on the intake. I'm actually surprised the temp went down 2 degree like that. I can see how the noise went down some.

This is how I reduced noise the first time: https://imgur.com/a/sPLMc1J

I had an A3 in there and it was pretty quiet actually.

Ended up taking the intake piece off and just covering the hole with the cheapest home AC vent filter. Worked well.

[htautosjay]

Has anyone successfully mined Commercium (CMM) with the Z9?....

[mfurman]

First of all, the metal fan protection is removed, secondly - it somehow works. I mean temperature drops by ~ 2 degrees and noise drops ~6 dB.
I actually bought it on ebay for another Antminer.

I dont really understand thermodynamics and all but is true that your ambiance temp is below 20c ?, this kind of extension modification not working for tropical climate (ambient above 25c), it only make it hotter (by 2-3 or more in celcius, on s9)
As for the noice reduction,  isn it because of projected sound ? The longer the cone will make lower noise but if you measure it on the projection area (in front of the cone) its the same db produced

Anyone tried to put additional exhaust fan on z9 mini ?

It works for me. The temperature is not going up. Today, we have 34C outside (28-29C in the room where this Z9 is located  (together with 20 GPUs)

Can you post a picture?  I'm in a similar environment.

I did, please look a few posts earlier. Here it is again:

I think he is asking for a picture with it on the miner and hooked up. Would be cool to see.

Here it is:

Wow, I didn't realize you had it on the intake. I'm actually surprised the temp went down 2 degree like that. I can see how the noise went down some.

This is how I reduced noise the first time: https://imgur.com/a/sPLMc1J

I had an A3 in there and it was pretty quiet actually.

Ended up taking the intake piece off and just covering the hole with the cheapest home AC vent filter. Worked well.

You are showing another interesting idea! The other advantage of this type of intake for the miner is that you can easily direct cooler air into it (hose from AC or fans or even just blow this air into the intake with an additional funnel). I have not done it yet but I might if I decide to go for max OC.

[jrc209]

Has anyone successfully mined Commercium (CMM) with the Z9?....

yep

[TGJ]

This thread has gone off topic...

[htautosjay]

Has anyone successfully mined Commercium (CMM) with the Z9?....

yep

Cool, can you advise me what the URL is and worker setup is please.. and what exchange you are using?..
Cheers

[htautosjay]

Has anyone successfully mined Commercium (CMM) with the Z9?....

yep

Cool, can you advise me what the URL is and worker setup is please.. and what exchange you are using?..
Cheers

us.cmmmine.com:3032

worker is your CMM address

Couldn't figure out CryptoBridge, so the exchange I setup on is https://safe.trade

I'm not actively mining it, just have it setup in my auto-profit switch in case it decides to ranodmly skyrocket, but I can confirm that the pool is compatible with Z9s.




Now, my question is whether or not there are any ZEC pools that actually work with the Z9? I've tried antpool's but it rejected 100% of my shares.

That's great thank you for your help... ohh Antpool is working fine with the Z9

Summary
Elapsed   KSol/S(RT)   KSol/S(avg)   FoundBlocks   LocalWork   Utility   WU   BestShare
1d9h57m42s   17.35   16.58   0   76,760   6.05   109.77   0
Pools
Pool   URL   User   Status   Diff   GetWorks   Priority   Accepted   Nonce#   DiffA#   DiffR#   DiffS#   Rejected   Discarded   Stale   LSDiff   LSTime
0   stratum+tcp://stratum-zec.antpool.com:8899   HTAutos.z1   Alive   17   2,635   0   12,318   0   211,787   11,899   0   695   66,221   0   17   0:00:05
1   stratum+tcp://stratum-zec.antpool.com:443   HTAutos.z1   Alive   15   2   1   0   0   0   0   0   0   0   0   0   0
2   stratum+tcp://stratum-zec.antpool.com:25   HTAutos.z1   Alive   15   2   2   0   0   0   0   0   0   0   0   0   0
Total               2,639      12,318   0   211,787   11,899   0   695   66,221   0      
HW   0                     NaN%   0.0000%                     
AntMiner

[htautosjay]

Now, my question is whether or not there are any ZEC pools that actually work with the Z9? I've tried antpool's but it rejected 100% of my shares.

That's great thank you for your help... ohh Antpool is working fine with the Z9

Huh, you're right, re-enabled it today and it's taking my shares. Whatever I guess

How about ZCL pools? I've tried a couple with no luck myself

Cant find any ZCL myself. i like simple and straight forward.. that CMM miming looks good on paper but i think in reality better with Antpool on Zec (that works and pays)

[htautosjay]

Now, my question is whether or not there are any ZEC pools that actually work with the Z9? I've tried antpool's but it rejected 100% of my shares.

That's great thank you for your help... ohh Antpool is working fine with the Z9

Huh, you're right, re-enabled it today and it's taking my shares. Whatever I guess

How about ZCL pools? I've tried a couple with no luck myself

where can you send mined CMM revenues to? that SafeTrade says:>
Please use your common wallet services, local wallet, mobile terminal or online wallet, select a payment and send. Mining directly to deposit addresses is not permitted.

[Longsnowsm]

Has anyone successfully mined Commercium (CMM) with the Z9?....

yep

Cool, can you advise me what the URL is and worker setup is please.. and what exchange you are using?..
Cheers

us.cmmmine.com:3032

worker is your CMM address

Couldn't figure out CryptoBridge, so the exchange I setup on is https://safe.trade

I'm not actively mining it, just have it setup in my auto-profit switch in case it decides to ranodmly skyrocket, but I can confirm that the pool is compatible with Z9s.




Now, my question is whether or not there are any ZEC pools that actually work with the Z9? I've tried antpool's but it rejected 100% of my shares.

That's great thank you for your help... ohh Antpool is working fine with the Z9

Summary
Elapsed   KSol/S(RT)   KSol/S(avg)   FoundBlocks   LocalWork   Utility   WU   BestShare
1d9h57m42s   17.35   16.58   0   76,760   6.05   109.77   0
Pools
Pool   URL   User   Status   Diff   GetWorks   Priority   Accepted   Nonce#   DiffA#   DiffR#   DiffS#   Rejected   Discarded   Stale   LSDiff   LSTime
0   stratum+tcp://stratum-zec.antpool.com:8899   HTAutos.z1   Alive   17   2,635   0   12,318   0   211,787   11,899   0   695   66,221   0   17   0:00:05
1   stratum+tcp://stratum-zec.antpool.com:443   HTAutos.z1   Alive   15   2   1   0   0   0   0   0   0   0   0   0   0
2   stratum+tcp://stratum-zec.antpool.com:25   HTAutos.z1   Alive   15   2   2   0   0   0   0   0   0   0   0   0   0
Total               2,639      12,318   0   211,787   11,899   0   695   66,221   0      
HW   0                     NaN%   0.0000%                     
AntMiner

I have never used Antpool before so when I attempted to set it up with a worker and mine to it nothing showed up on the dashboard.  I don't know what the trick is to use Antpool.  I finally gave up and moved on to another pool.  So I must have done something wrong if it is working for other people.

[htautosjay]

Now, my question is whether or not there are any ZEC pools that actually work with the Z9? I've tried antpool's but it rejected 100% of my shares.

That's great thank you for your help... ohh Antpool is working fine with the Z9

Huh, you're right, re-enabled it today and it's taking my shares. Whatever I guess

How about ZCL pools? I've tried a couple with no luck myself

Cant find any ZCL myself. i like simple and straight forward.. that CMM miming looks good on paper but i think in reality better with Antpool on Zec (that works and pays)

Just got MiningPoolHub ZCL pool working (I think). I don't really trust this pool since the dashboard never seems to show my hashrate even though I'm getting accepted shares for the past 15-20 minutes.

I agree i like transparency to a degree.. plus i cant find where again to send mining proceeds in ZCL

[htautosjay]

Any more info on Nicehash acceptance?

[htautosjay]

On mining pool hub--Mining BTG  https://bitcoin-gold.miningpoolhub.com/
Can i input my Binance BTG wallet deposit address or do i have to have a mining pool hub wallet..
Can anyone tell me how to set up my Z9 to mine BTG please..
Thanks

[yrk1957]

On mining pool hub--Mining BTG  https://bitcoin-gold.miningpoolhub.com/
Can i input my Binance BTG wallet deposit address or do i have to have a mining pool hub wallet..
Can anyone tell me how to set up my Z9 to mine BTG please..
Thanks

There is a built-in wallet, from which you can setup transfers to your external wallet at thresholds.