Terk (OP)
|
|
May 22, 2015, 12:26:14 AM |
|
10 days have passed as the pool is not paying me...
All your accounts were suspended because of block withholding attack (explanation for other users: his miners were sending shares except when they actually found a block - in that case they threw the share away so the pool never mined that block; this is actually stealing from other pool users, because his miners were only faking mining, they were not contributing anything valuable, but he still tried to get paid for his worthless shares). I suspended ~10 your accounts in recent weeks and you keep creating new. You'd better go with your fraudulent hashrate somewhere else, because you will only keep losing here. I won't let you steal from other CleverMining users. CleverMining has ways to detect block withholding attack and I even improved them recently because of you. All fraudulent accounts will be silently suspended without notification, so you won't even know if you're suspended or not, until you miss a payout or two. This will cost you money and you won't get paid for your cheated hashrate. Save yourself the trouble and go somewhere else.
|
|
|
|
|
|
|
"You Asked For Change, We Gave You Coins" -- casascius
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Terk (OP)
|
|
May 22, 2015, 12:27:58 AM |
|
Thanks for your help. i have now a BTC address on Blockchain.info
my current payout on Clevermining is Ready For Payout 0.01274490 BTC As i understand above 0.01 this should be payed daily. But i have 0.012 now for three days but no payout. I hope this causes on the Cryptsy address i used.
8bf4b7bbbbdc98ac2b17e127fc12d5c84554e687
I have now a BTC address is there any way to pay this to the BTC address or transfer this to the BTC address? ( Im now mining with the BTC address from Blockchain)
Best Dirk
I merged your accounts and moved all balance from your invalid username (Cryptsy key) to your correct BTC address which you sent me via PM (after confirming that they both were mining from the same IP). You should get a payout for all your past mining tonight.
|
|
|
|
Stoneface
Newbie
Offline
Activity: 25
Merit: 0
|
|
May 26, 2015, 12:36:36 PM |
|
Hi Terk,
thanks for this, worked great for me. sorry for this late answer, but anyway i was not able to log into this Forum the last days.
But i have an additional question. on clevermining.com o get a lot of: "Stratum from pool 0 requested work restart"
the most time the miner is running i get more of this lines then "Accepted" I have this on different configuration, Raspberry Pi with Gridseed-Blade, Raspberrry Pi with Zeusminer (Blizzard, Thunder, lightning) and all miners tested with Windows and CGminer and give the same result. More restarts then accepted work. This gives me a big feeling of wasting mining power on clevermining. Even i have done this tests also with different pools. on Multipool and Wemineltc i have one "requested workrestart" every 50-60 lines.
Is there any hint you can give me, because i dont like to waste mining power but like to stay on clevermining.
Thanks Stonie
|
|
|
|
dma_k
Newbie
Offline
Activity: 2
Merit: 0
|
|
May 28, 2015, 07:48:09 AM |
|
Dear maintainers of CleverMining.com,
First of all thanks for supporting this pool. It was very easy to start mining.
My question is the following. I would like to gather the statistics about the current BTC balance for my wallet / account and aggregate it in another service. For that I would love to access the "raw" values e.g. via some service the returns XML or JSON just with numbers (immature, unexchanged, ready for payout, total, last 24 hours hashrate). Unfortunately the web site is protected against this numbers to be accessed in automatic mode (for good reason). Is there any way to get them somehow differently? Thanks.
|
|
|
|
Dries
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 06, 2015, 01:32:56 PM |
|
Hello,
I get 100% Rejected: 689.7 kH/s (100.0%) and Stratum from pool 0 requested work restart is almost the only thing comming up. Same as low difficulty as low as 0.0% Is this oke or am i doing something wrong? cgminer.exe -o stratum+tcp://eu.clevermining.com:3333 -u 1DDLy5iRLx29zMWZJ7X5jqLGnB2t2aFYdm -p anything
Someone please help! Dries
|
|
|
|
Stoneface
Newbie
Offline
Activity: 25
Merit: 0
|
|
June 10, 2015, 11:21:14 AM |
|
Is there an answer possible to this "request restart" thing? with the current settings: 100% LTC in the last 30 Days, 2% Fee, and wasting mining power because of restart requests, this pool is not really profitable instead of mining LTC directly.
even the fast answers here in the forum are not really a motivation ;-)
Best Stone
|
|
|
|
BieBieJulie
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 12, 2015, 05:52:56 AM |
|
Site is down for almost 4 hours, and payment delayed again. What is happening ?
|
|
|
|
alienesb
|
|
June 12, 2015, 03:22:33 PM |
|
Site is down for almost 4 hours, and payment delayed again. What is happening ? Big numbers today that's what!
|
|
|
|
Terk (OP)
|
|
June 13, 2015, 12:57:56 PM |
|
You can't access data this way at the moment, sorry. Dear maintainers of CleverMining.com,
First of all thanks for supporting this pool. It was very easy to start mining.
My question is the following. I would like to gather the statistics about the current BTC balance for my wallet / account and aggregate it in another service. For that I would love to access the "raw" values e.g. via some service the returns XML or JSON just with numbers (immature, unexchanged, ready for payout, total, last 24 hours hashrate). Unfortunately the web site is protected against this numbers to be accessed in automatic mode (for good reason). Is there any way to get them somehow differently? Thanks.
|
|
|
|
Terk (OP)
|
|
June 13, 2015, 01:04:53 PM |
|
Is there an answer possible to this "request restart" thing?
This is NOT wasting hashrate. It's related to merged mining and simply means that you received a new work to mine. But no hashes were wasted - you simply start mining on the next set of data. with the current settings: 100% LTC in the last 30 Days, 2% Fee, and wasting mining power because of restart requests, this pool is not really profitable instead of mining LTC directly.
Remember, that the numbers displayed on the website are after taking fee. So it's not 100% minus 2% fee. It's really 102% minus 2% fee = 100%. The pool had some tech difficulties in May which affected profitability a bit, so our 30-day average is low. But our 5-day average is 111% (after fee).
|
|
|
|
Stoneface
Newbie
Offline
Activity: 25
Merit: 0
|
|
June 15, 2015, 01:27:12 PM |
|
Hi Terk,
thanks for this info. hopefully these problems are solved and pool is back to normal now.
I had my miners switched back to Clevermining.
Best Stonie
|
|
|
|
|
Jynger
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 16, 2015, 12:18:06 PM |
|
Any chance for API ? Would like to see the Immature, Unexchanged, Ready For Payout, Total Expected as 24h chart... nice pool btw
|
|
|
|
Deranged
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 26, 2015, 07:14:45 PM |
|
So hi, I am really new at this whole mining thing. I have been trying to get into it for a while but things have just been getting in the way. So I was trying to mine with the Awesome Miner program in conjunction with a CleverMining pool and I just am not sure what I am doing wrong. Nothing gets accepted and instead just all gets chalked up to HW Errors. Moreover, it doesn't even seem like my GPU is involved in the mining process even though I am getting hashrates. I have tried changing up intensities, thread rates, using the templates available, and nothing is working. Please help! Like I said, I am new at this so any (simplified!) help would be greatly appreciated. Attached is a screenshot of what is going on, but if there is any other info I need to provide I will gladly do so. And if the parts in my computer won't cut it at this level, are there any other ways I can mine? Help is greatly appreciated! GPU: GeForce GTX 960 2GB XLR8 CPU: Intel Core i5-4460 3.2GHz Quad-Core https://i.imgur.com/kNgnEid.jpg
|
|
|
|
LordCoder
|
|
June 27, 2015, 11:01:22 PM |
|
So hi, I am really new at this whole mining thing. I have been trying to get into it for a while but things have just been getting in the way. So I was trying to mine with the Awesome Miner program in conjunction with a CleverMining pool and I just am not sure what I am doing wrong. Nothing gets accepted and instead just all gets chalked up to HW Errors. Moreover, it doesn't even seem like my GPU is involved in the mining process even though I am getting hashrates. I have tried changing up intensities, thread rates, using the templates available, and nothing is working. Please help! Like I said, I am new at this so any (simplified!) help would be greatly appreciated. Attached is a screenshot of what is going on, but if there is any other info I need to provide I will gladly do so. And if the parts in my computer won't cut it at this level, are there any other ways I can mine? Help is greatly appreciated! GPU: GeForce GTX 960 2GB XLR8 CPU: Intel Core i5-4460 3.2GHz Quad-Core Use cudaMiner for Scrypt mining with a GTX. sgminer is better for AMD GPU's. Also you should keep under control your temperature.
|
|
|
|
Stoneface
Newbie
Offline
Activity: 25
Merit: 0
|
|
June 30, 2015, 02:32:00 PM |
|
Only a question of interest.
Why are you killing your GPU with mining at 200Kh/s ? I think if you like to mine, buy a small Zeusminer like the Blizzard with 1.3Mh/s for round about 50 bugs on Ebay. If you start this with a Raspberry Pi for mining, you have a much higher Hashrate, and you need much lower power. And you don't kill your GPU;-)
only my two cent
|
|
|
|
Stoneface
Newbie
Offline
Activity: 25
Merit: 0
|
|
July 02, 2015, 12:20:35 PM |
|
is there any option to prevent this :
July 2, 2015 partial results after 12 hours: 0.000135 BTC/day per MH/s (35% LTC)
like if <90% (ideal <100%) switch to LTC mining?
so the pool will always same or better then LTC ;-)
Best Stonie
|
|
|
|
Deranged
Newbie
Offline
Activity: 5
Merit: 0
|
|
July 03, 2015, 03:21:29 AM |
|
I was doing it because, like I said, I have only just started trying to mine and I was trying to see if I could do this with my current setup. In all honesty, I have no idea what I am doing half of the time!
|
|
|
|
jorjito25
|
|
July 04, 2015, 06:00:40 AM |
|
After two years of mining, I have a handful of services that I really appreciate, one of them is CleverMining. So: Thank you for your services, giving my the ability to make a few bucks extra! And an hobby
|
|
|
|
Terk (OP)
|
|
July 04, 2015, 10:29:56 AM |
|
is there any option to prevent this :
July 2, 2015 partial results after 12 hours: 0.000135 BTC/day per MH/s (35% LTC)
like if <90% (ideal <100%) switch to LTC mining?
so the pool will always same or better then LTC ;-)
We always mine LTC if there are no other coins more profitable at the moment. This is just variance. With our current hashrate we are expected to mine one LTC block per hour, if we would put all our hashrate into LTC (which of course we don't do, because we mine also other coins, but let's assume this for simplicity). So it's 12 blocks within these 12 hours mentioned. But this is a long-term expected average. Mining is a random game and you can mine five blocks in an hour and then don't mine a block for five hours. Every pool has such variance and it's completely normal. We have periods with 35% profitability and then periods with 250% profitability. You shouldn't neigher worry nor get excited with short-term stats.
|
|
|
|
|