[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[Nerchial]

Hello,
I can't see the user stats even if I started mining 10 hours ago.
Bitcoin Address :
32g5x3XbXgG31Sh4UykZrUyLraVoJfNDrY

[not.you]

But i have a lot of BTC in "Unexchanged" and they are not moving to "ready for payout" for nearly two days.

Same for me. 

[Terk]

Hi Terk,
I had still no payout, but maybe it takes more time for the blockchain to sync.
But i have a lot of BTC in "Unexchanged" and they are not moving to "ready for payout" for nearly two days.
and as i remember this happens more often over a day in the past.
maybe you can take a look into this.

1JnmoLccUYafL7o2wcpb8y6PoB7kDz2D7H

and there is no hurry on my side, I think its better to wait a little bit then to loose something.

Our software marks coins as "exchanged" after they are 1) exchanged to bitcoins AND 2) withdrawn from exchanges AND 3) our software verifies this in our BTC wallet. Points 1) and 2) did happen. Most mined coins are exchanged and are already at our addresses, so you don't need to worry about exchanging and currency rates. But 3) is still pending because of wallet maintenance. Once it's finished, statuses will be updated to exchanged and payouts will be made.

Our wallet is still downloading/synching blockchain from scratch. I could download preprocessed blockchain files from torrents to make the process quicker. This should be rather safe, but it's nowhere as safe as downloading blockchain the traditional way and validating each transaction by bitcoind software. So I prefer to do it the traditional and the most secure way.

I'm sorry but downloading/syncing blockchain takes longer than I expected. It slows down over time, because earlier blocks were smaller; recent blocks are bigger and take longer to process and it seems that progress percent reported by bitcoind is not accurrate enough to predict remaining time. My previous estimations were based on this progress status.

Trying to estimate in a different way: we still have ~31000 blocks to download and process and we do it at a rate of 2.7 seconds per block. It should take ~24 hours to complete at this speed. This speed will most likely decrease because recent blocks were full and will take more time to process per block than earlier blocks, so it might extend but I think that no longer than 36 hours.

tl;dr: I apologize for inconvenience caused by delays, but there's nothing to worry. Our wallet is syncing the blockchain from scratch and it takes time. Everything should be resolved and back to normal within 24~36 hours. All outstanding payouts will be sent at this time and the pool will return to scheduled daily payouts as usual.

[not.you]

Makes sense.  Thanks for the explanation.   

[Stoneface]

Hi Terk,

thanks for your explanation.

this brings much more light in my darkness ;-)

I'm also more for the save way, but I'm far away from a professional to understand what happens behind the scenes.

So sorry for my questions ;-)

[ShadowBits]

Hi Terk,
I had still no payout, but maybe it takes more time for the blockchain to sync.
But i have a lot of BTC in "Unexchanged" and they are not moving to "ready for payout" for nearly two days.
and as i remember this happens more often over a day in the past.
maybe you can take a look into this.

1JnmoLccUYafL7o2wcpb8y6PoB7kDz2D7H

and there is no hurry on my side, I think its better to wait a little bit then to loose something.

Our software marks coins as "exchanged" after they are 1) exchanged to bitcoins AND 2) withdrawn from exchanges AND 3) our software verifies this in our BTC wallet. Points 1) and 2) did happen. Most mined coins are exchanged and are already at our addresses, so you don't need to worry about exchanging and currency rates. But 3) is still pending because of wallet maintenance. Once it's finished, statuses will be updated to exchanged and payouts will be made.

Our wallet is still downloading/synching blockchain from scratch. I could download preprocessed blockchain files from torrents to make the process quicker. This should be rather safe, but it's nowhere as safe as downloading blockchain the traditional way and validating each transaction by bitcoind software. So I prefer to do it the traditional and the most secure way.

I'm sorry but downloading/syncing blockchain takes longer than I expected. It slows down over time, because earlier blocks were smaller; recent blocks are bigger and take longer to process and it seems that progress percent reported by bitcoind is not accurrate enough to predict remaining time. My previous estimations were based on this progress status.

Trying to estimate in a different way: we still have ~31000 blocks to download and process and we do it at a rate of 2.7 seconds per block. It should take ~24 hours to complete at this speed. This speed will most likely decrease because recent blocks were full and will take more time to process per block than earlier blocks, so it might extend but I think that no longer than 36 hours.

tl;dr: I apologize for inconvenience caused by delays, but there's nothing to worry. Our wallet is syncing the blockchain from scratch and it takes time. Everything should be resolved and back to normal within 24~36 hours. All outstanding payouts will be sent at this time and the pool will return to scheduled daily payouts as usual.

Thank you for this.  <3 your site!  So little headaches when mining here.  I can't tell you how much I appreciate how well this site works

[MooseAgedon]

Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.

Batch File: ccminer.exe  -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x

CMD: Try 'ccminer --help' for more information.

[iskandarX]

Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.

Batch File: ccminer.exe  -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x

CMD: Try 'ccminer --help' for more information.

Switch to cgminer 3.7.2 more stability for gpu mining, gridseed.

[MooseAgedon]

Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.

Batch File: ccminer.exe  -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x

CMD: Try 'ccminer --help' for more information.

Switch to cgminer 3.7.2 more stability for gpu mining, gridseed.

Thanks mate, just downloaded it. but i have a new issue. i ran this batch file: cgminer.exe -o stratum+tcp://ziftr.betarigs.com:3333 -u MitchAgedon.WorkerAgedon -p 1234

then the program runs and says there is an error, failed to init gpu.

it also says decrease tc or increase lg.

[iskandarX]

Hello Everybody,
im new to the mining game. been mining various coins for the past few months then i found this pool and it sounds great but im having trouble starting to mine. Im using ccminer which then told me to "try DJM edition". so i tried that but then i get no errors but it wont run.

Batch File: ccminer.exe  -a scrypt -o stratum+tcp://eu.clevermining.com:3333 -u 1J1VtVckxBmoqBTtWLfV5nfSbsHPVTPkrV -p x

CMD: Try 'ccminer --help' for more information.

Switch to cgminer 3.7.2 more stability for gpu mining, gridseed.

Thanks mate, just downloaded it. but i have a new issue. i ran this batch file: cgminer.exe -o stratum+tcp://ziftr.betarigs.com:3333 -u MitchAgedon.WorkerAgedon -p 1234

then the program runs and says there is an error, failed to init gpu.

it also says decrease tc or increase .

Change inside the bat file with this: cgminer.exe --scrypt -o stratum+tcp://eu.clevermining.com:3333 -u YOUR_BTC_ADDRESS -p x

[Tanjence]

Hello Team,

I request you to please check your systems I have not received my payouts since 11th of July 2015. Its holding more that 1BTC at the moment.

My username is: 1Gt5ZEZyBLW4NSf37XiAGm7YYZ5rtyfKux

Regards
Tanjence

[not.you]

Hello Team,

I request you to please check your systems I have not received my payouts since 11th of July 2015. Its holding more that 1BTC at the moment.

My username is: 1Gt5ZEZyBLW4NSf37XiAGm7YYZ5rtyfKux

Regards
Tanjence

Read back a page or two.  BTC wallet is syncing on the pool side and it is taking some time.  Payout should probably come today.

[Terk]

We are only 6000 blocks short at this moment to finish syncing the blockchain. Payouts will definitely resume today. Thank you again for your patience.

[iskandarX]

Hello Team,

I request you to please check your systems I have not received my payouts since 11th of July 2015. Its holding more that 1BTC at the moment.

My username is: 1Gt5ZEZyBLW4NSf37XiAGm7YYZ5rtyfKux

Regards
Tanjence

Wow awesome earning, I wonder how big your mining rig kh are you using mate?

[Stoneface]

He works currently with 750MH
So seams to be a kind of the bigger one.

You can easily check this on your own.
the BTC address is the username, so you can simply search for him in the user area.

Best
Stonie

[not.you]

Hmmm...

blockchain.info regarding the last payout:

Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200

I have never seen that.  Do miners still pick up these transactions?  Seem like I have seen transactions exceed 200 outputs before from BTC mining pools...

[Terk]

Payout has just been sent: https://www.blocktrail.com/BTC/tx/3cf3c92ff0615cedf3647db4bddb9c0fa98ae69439798941a7130023b45cc779

I apologize again for the delay and thank you all for your patience. Payouts will run daily again now.

[Terk]

Hmmm...

blockchain.info regarding the last payout:

Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200

I have never seen that.  Do miners still pick up these transactions?  Seem like I have seen transactions exceed 200 outputs before from BTC mining pools...

Blockchain.info doesn't really shine these days. I need to change website links to use a different block explorer.

Transaction was sent with 0.00460157 BTC fee (which makes it 0.000148438 BTC per 1 kB) and I think it should be mined soon.

[Terk]

Hmmm...

blockchain.info regarding the last payout:

Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200

I have never seen that.  Do miners still pick up these transactions?  Seem like I have seen transactions exceed 200 outputs before from BTC mining pools...

It was included in the first block mined after transaction was sent and blockchain.info shows it now: https://blockchain.info/tx/3cf3c92ff0615cedf3647db4bddb9c0fa98ae69439798941a7130023b45cc779

[not.you]

Hmmm...

blockchain.info regarding the last payout:

Transaction rejected by our node. Reason: The Maximum number of outputs in a single transaction is 200

I have never seen that.  Do miners still pick up these transactions?  Seem like I have seen transactions exceed 200 outputs before from BTC mining pools...

It was included in the first block mined after transaction was sent and blockchain.info shows it now: https://blockchain.info/tx/3cf3c92ff0615cedf3647db4bddb9c0fa98ae69439798941a7130023b45cc779

Yeah I saw that.  So I guess they won't relay it but as a block explorer they have no choice but to include it once it gets mined.