[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[dailyarsenal]

May I suggest adding some kind of notification option so that if a worker becomes idle an email will be sent to notify the miner?

[neptunus]

Can we have avg. BTC/USD rate on the top?

Thanks

[corsaro]

6.9% reject? Is that an indirect pool fee?

high reject percentage can depend from "fast money" mined (too low difficulty) and/or from the fact their us server is far away from your location.

About location, we are all waiting for eu and asia server that should come in the following hours; about fast money, we cannot do anything due to the fact some fast money are normally mined with an high reject rate due to the low difficulty. In this case for low difficult fast money, you can try to add --expiry 1 --scan-time 1 --queue 0 to your cgminer options to see if reject rate can be lowered a bit.

Just evaluate if clevermining high profitability (normally higher then other scrypt multipools) compensate the high reject rate (normally at 5-6% on a 24 hours basis).
Just an example...

if clevermining pays you 0,012 for 1 Megahash/s and you are losing 5% for 24h reject rate, you will gain 0,00114
If 0,0114 is a good profitability for your rig, compared to other multipools, you can tolerate this 5% reject rate.

[mc1225]

Following this thread

[Kj1]

just curious about which coins are being mined and their profitability, if you have some spare time could you add that to the site?

[neptunus]

just curious about which coins are being mined and their profitability, if you have some spare time could you add that to the site?

Why?

[testicus]

I have issue with one payment. It stay on unverified status. And also I have checked the profit which is reported by the site and the one which is in my wallet and in the wallet is less.
@Terk: Can you please assist? How is this possible?

Thanks.

[z0mbai0]

Hello all, I am not an expert here. Just wanted to make the stats clear. Here is my cgminer picture running for 12 hours.The reject rate is constanly around 3%, check please the other stats. The WU is around 2700. I have read the forum thread and seems that the pools pays for the work utility not for the hashrate. Well it is a product of the hashrate anyway. The site statistics shows 3mh/s or 2.6 or 2.8 but it never maches the ratio between the hasrate and WU ~ 90%. If it is correct that we get paid for the WU, is there way to make it higher based on the cgminer picture below? and is the site stats that correct ot it varies and is just illustrative? Thanks a lot, any reply is appreciated.




 cgminer version 2.11.4 - Started: [2014-03-02 20:54:50]
--------------------------------------------------------------------------------
 (5s):2.936M (avg):2.950Mh/s | A:3857  R:121  HW:0  U:5.0/m  WU:2669.6/m
 ST: 2  SS: 6  NB: 3183  LW: 39393  GF: 1  RF: 0
 Connected to us.clevermining.com diff 512 with stratum as user 1NFHrYMkz9Z1ziAt
 Block: c37c01cd760cdf7c...  Diff:14.1M  Started: [09:38:24]  Best share: 1.16M
--------------------------------------------------------------------------------
 [P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  72.0C 2599RPM | 745.8K/744.7Kh/s | A: 994 R:20 HW:0 U:1.30/m I:13
 GPU 1:  76.0C 2670RPM | 742.8K/743.1Kh/s | A:1017 R:39 HW:0 U:1.33/m I:13
 GPU 2:  67.0C 2290RPM | 730.7K/730.1Kh/s | A: 931 R:31 HW:0 U:1.22/m I:13
 GPU 3:  61.0C 2410RPM | 731.7K/730.3Kh/s | A: 915 R:31 HW:0 U:1.20/m I:13
--------------------------------------------------------------------------------

 [2014-03-03 09:30:35] Stratum from pool 0 detected new block
 [2014-03-03 09:30:37] Accepted 01c3aa9a Diff 910/512 GPU 2
 [2014-03-03 09:30:45] Accepted ab9485d0 Diff 5.62K/512 GPU 3
 [2014-03-03 09:31:19] Accepted 8371efd9 Diff 732/512 GPU 3
 [2014-03-03 09:32:00] Accepted eaf5588b Diff 874/512 GPU 3
 [2014-03-03 09:32:02] Accepted 1dac49ec Diff 589/512 GPU 2
 [2014-03-03 09:32:12] Accepted 212bc284 Diff 769/512 GPU 2

[_r2h]

just curious about which coins are being mined and their profitability, if you have some spare time could you add that to the site?

Terk already noted elsewhere he wasn't going to release info.

[_r2h]

Hey Terk - can you confirm if your custom stratum software follows the standards (meaning scan-time, expiry and queue settings local to our miners are meaningless), or if we specify settings that they are in fact not ignored?

Those settings are client side only. 

[CoinBuzz]

Hey Terk - can you confirm if your custom stratum software follows the standards (meaning scan-time, expiry and queue settings local to our miners are meaningless), or if we specify settings that they are in fact not ignored?

Those settings are client side only. 

In theory Stratum server implementation should send those settings to clients as well as send work restart command as soon as a block change.

[haggis]

I have 2.5MH with 4% rejection rate. But the interface shows me only 1.7MH. What's wrong here?

[ilear]

It shows accepted #rate. I've got 2.4 too in theory 780/810/790 on my 3x280 rig, but #rate on stat page shows usually 2.1-2.5

If u got below 2.0 i bet it's ur settings.

[Starscream]

It shows accepted #rate. I've got 2.4 too in theory 780/810/790 on my 3x280 rig, but #rate on stat page shows usually 2.1-2.5

If u got below 2.0 i bet it's ur settings.

You need to compare it to your WU not KH/s...

[mi0]

It shows accepted #rate. I've got 2.4 too in theory 780/810/790 on my 3x280 rig, but #rate on stat page shows usually 2.1-2.5

Wow, can You post Your cgminer settings? I have 3x280x too, but fastest card has only 740kH/s 

[cryptoaddict09]

I have multiple rigs, can i use same user (btc address) and password for all the rigs or must have a differente wallet to different rig ?

[Alpharoid]

I have multiple rigs, can i use same user (btc address) and password for all the rigs or must have a differente wallet to different rig ?

Yes, same addresss.

[ozzy1926]

It shows accepted #rate. I've got 2.4 too in theory 780/810/790 on my 3x280 rig, but #rate on stat page shows usually 2.1-2.5

If u got below 2.0 i bet it's ur settings.

You need to compare it to your WU not KH/s...

do you know where can i compare my wu rates?i have 2x r290

[ilear]

It shows accepted #rate. I've got 2.4 too in theory 780/810/790 on my 3x280 rig, but #rate on stat page shows usually 2.1-2.5

If u got below 2.0 i bet it's ur settings.

You need to compare it to your WU not KH/s...

I am My WU from 3 cards is usually 2.3-2.2 with those 3 cards. I was explaining that theoretical KH/s doesnt count so much.

my settings for 280x are standard so -w 256 gpu threads 2, I 13 etc.
Just using high settings for cards, got 3x Asus DirectCU 2,
first is 1130/1500 with 1.44 V and 2&3rd have 1170/1800 with default voltage. Whole rig takes 959W.
Temps ~70 degrees with 60% fan settings on all 3 cards.

I think i will change my settings to 1130/1500 for all 3 cards, with lowered voltage, because in longer run it will be more profitable i guess. I can get 770KH/s with 1 card with 1130 engine clock.

[haggis]

My WU are 820/750/710
2.5MH in total
6.5% reject
2.1MH shown at site :/