[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[aaronsace]

How many times a day coins are being auto exchanged ? Trying to figure out how much of earned BTC fee eats. I know it's only 0,2%, but if coins are being sent for exchange 20 times a day then that fee in total is not that small after all. Also, I don't see it anywhere but perhaps it is possible to set value of how many times a day coins are being exchanged ?

It's a percentage so it doesn't matter how many times.

The pool is one huge wallet and, when that wallet hits the minimum amount, it is transferred to the exchange.

https://bitcoin.miningpoolhub.com/index.php?page=account&action=transactions

[evolart]

I read the auto exchange happens every 12 hours. 12 hours in crypto could mean your coin you are exchanging has lost massive amounts of value to.

[kazakru]

help, why such a difference
http://pixs.ru/showimage/Skrinshot2_5386633_28675229.png

[aaronsace]

help, why such a difference

It's exactly the same???

[aaronsace]

I read the auto exchange happens every 12 hours. 12 hours in crypto could mean your coin you are exchanging has lost massive amounts of value to.

It's the coin difficulty that effects your profits the most, not the exchange value.

Where did you get 12 hours from? I'm quite sure it can be between hours or days.

[evolart]

I read the auto exchange happens every 12 hours. 12 hours in crypto could mean your coin you are exchanging has lost massive amounts of value to.

It's the coin difficulty that effects your profits the most, not the exchange value.

Where did you get 12 hours from? I'm quite sure it can be between hours or days.

Forum posts here.

[aaronsace]

I read the auto exchange happens every 12 hours. 12 hours in crypto could mean your coin you are exchanging has lost massive amounts of value to.

It's the coin difficulty that effects your profits the most, not the exchange value.

Where did you get 12 hours from? I'm quite sure it can be between hours or days.

Forum posts here.

It's probably just conjecture then unless it's MiningPoolHub posting.

[miner2speed]

Has anyone an idea of how to use excavator with MPH-algo switching directly in the .bat file
(as shown for nvidia/ccminer and EthDcrMiner64)?
The real problem is to enable the "no retry" function for excavator (if available)...
thx for your help  

[aaronsace]

Has anyone an idea of how to use excavator with MPH-Algo switching directly in the .bat file
(as shown for nvidia/ccminer and EthDcrMiner64)?
The real problem is to enabel the "no retry"-function for excavator (if availlable)...
thx for your help 

MiningPoolHub is blocked be Excavator; try MultiPoolMiner to bypass the block.

[miner2speed]

I used the MultiPoolMiner but there is some strange thing going on when MPM running or algo-switching:
I had to reduce the max power down to about 80% because otherwise the power supplies of my
6x 1080ti rig did an "overload shut off" from time to time.
This does not happen when running the exact command in a simple .bat file without MPM.

for example:
( excavator.exe -p 23456 -c MiningPoolHub_Lyra2RE2_2_Nvidia.json -na )

[aaronsace]

I used the MultiPoolMiner but there is some strange thing going on when MPM running or algo-switching:
I had to reduce the max power down to about 80% because otherwise the power supplies of my
6x 1080ti rig did an "overload shut off" from time to time.
This does not happen when running the exact command in a simple .bat file without MPM.

for example:
( excavator.exe -p 23456 -c MiningPoolHub_Lyra2RE2_2_Nvidia.json -na )

Not possible, it's the miners that cause the crashes. Was you switching between algorithms?

[miner2speed]

yes there was switching, lyra2re2, equihash, neoscrypt.. (see log below)
(I tried all miners standalone and no problem with 102% power)


from the log:
   Status: Running

      Speed Active                      Launched Command
      ----- ------                      -------- -------
395,79 MH/s 00 Days 01 Hours 30 Minutes 3 Times  Bin\Excavator\excavator.exe -p 23456 -c
                                                 MiningPoolHub_Lyra2RE2_2_Nvidia.json -na


   Status: Idle

    Speed Active                      Launched Command
    ----- ------                      -------- -------
0,00 PH/s 00 Days 00 Hours 09 Minutes Once     Bin\NVIDIA-Palgin\ccminer.exe -a lyra2v2 -o
                                               stratum+tcp://hub.miningpoolhub.com:17018 -u miner2speed.ku1 -p x
0,00 PH/s 00 Days 00 Hours 13 Minutes Once     Bin\Excavator\excavator.exe -p 3456 -c MiningPoolHub_Equihash_3.json
0,00 PH/s 00 Days 00 Hours 09 Minutes Once     Bin\Excavator\excavator.exe -p 23456 -c
                                               MiningPoolHub_Equihash_2_Nvidia.json -na

[dazz.]

Is there a problem with the Siacoin pool? it's not finding any blocks

https://siacoin.miningpoolhub.com/index.php?page=statistics&action=blocks

ETA: now that I noticed, it mined 3 blocks in the last 24h, looks like a bad luck day

[aaronsace]

yes there was switching, lyra2re2, equihash, neoscrypt.. (see log below)
(I tried all miners standalone and no problem with 102% power)


from the log:
   Status: Running

      Speed Active                      Launched Command
      ----- ------                      -------- -------
395,79 MH/s 00 Days 01 Hours 30 Minutes 3 Times  Bin\Excavator\excavator.exe -p 23456 -c
                                                 MiningPoolHub_Lyra2RE2_2_Nvidia.json -na


   Status: Idle

    Speed Active                      Launched Command
    ----- ------                      -------- -------
0,00 PH/s 00 Days 00 Hours 09 Minutes Once     Bin\NVIDIA-Palgin\ccminer.exe -a lyra2v2 -o
                                               stratum+tcp://hub.miningpoolhub.com:17018 -u miner2speed.ku1 -p x
0,00 PH/s 00 Days 00 Hours 13 Minutes Once     Bin\Excavator\excavator.exe -p 3456 -c MiningPoolHub_Equihash_3.json
0,00 PH/s 00 Days 00 Hours 09 Minutes Once     Bin\Excavator\excavator.exe -p 23456 -c
                                               MiningPoolHub_Equihash_2_Nvidia.json -na

You are switching between miners so it's not the same as running one miner.

Just note that MultiPoolMiner cannot crash the operating system.

It's most likely power spikes and/or miner parameters.
Get rid of Equihash_3 and any others with 3 threads as they are too intense. Even try 1 thread instead of 2 or 3.

[evolart]

Am I an idiot? Looking at the Auto Exchange page it seems to say that you can tell deposits to be made to the Auto Exchange wallet for that coin? I'm not seeing that at all...I only see the option to transfer from the regular wallet to the AE wallet manually?

[aaronsace]

Am I an idiot? Looking at the Auto Exchange page it seems to say that you can tell deposits to be made to the Auto Exchange wallet for that coin? I'm not seeing that at all...I only see the option to transfer from the regular wallet to the AE wallet manually?

There are manual options but this will set the default for newly mined coins (select the "auto exchange to" coin i.e. Bitcoin):
https://miningpoolhub.com/?page=account&action=autoexchange

[Korennya]

Alright.  I"m trying to figure out if i'm doing something wrong here or what?  I'm running multipool miner on MPH.  zpool is not in the bat file so, it only runs zpool for algo's not supported on MPH.  Anyway, Multiminer is reporting that I should be getting a profit of  .0009 BTC per day (running for 4 days now) on one machine and another .0008btc/day on another machine.  Both machines are on the same account at MPH, and I can see them as both active when I hunt the website to  see what algo's are being run.  However, my btc balance for a 24 hr period is only .00078btc.  That's pretty much 1/2 of what the  multiminer is predicting.    So is multiminer just blowing smoke up my a$$? or is something going wrong?  First two days I ran -multipoolhub,multipoolhubcoins,zpool.  Now i'm trying -multipoolhub,multipoolhubcoins but there's been no real difference at all (it was mostly mining MPH anyway before hand).

So why am I loosing 1/2 the expected btc/day rate?

For comparision, when NH was running i was getting .00143 per day from both rigs together actual payout btc, not estimated.  Supposedly direct mining is more profitable? or am I misinformed?

[aaronsace]

Alright.  I"m trying to figure out if i'm doing something wrong here or what?  I'm running multipool miner on MPH.  zpool is not in the bat file so, it only runs zpool for algo's not supported on MPH.  Anyway, Multiminer is reporting that I should be getting a profit of  .009 BTC per day (running for 4 days now) on one machine and another .008btc/day on another machine.  Both machines are on the same account at MPH, and I can see them as both active when I hunt the website to  see what algo's are being run.  However, my btc balance for a 24 hr period is only .0078btc.  That's pretty much 1/2 of what the  multiminer is predicting.    So is multiminer just blowing smoke up my a$$? or is something going wrong?  First two days I ran -multipoolhub,multipoolhubcoins,zpool.  Now i'm trying -multipoolhub,multipoolhubcoins but there's been no real difference at all (it was mostly mining MPH anyway before hand).

So why am I loosing 1/2 the expected btc/day rate?

Post your log onto GitHub and we can see if there are any issues with MultiPoolMiner itself.

Loses are expected but not half; takes hours (PPLNS system, coin confirmations, exchanges etc.) to appear in your BTC balance so you may want to wait a bit.

[Anistell]

What miner is better to use with Lyra2rev2?
I have 2.2 hash in Alexis miner, but 1.3 on pool.
2.04 with cc nanashi,but 1.7 on pool.
Any else miner that can be better for it?

[Korennya]

Alright.  I"m trying to figure out if i'm doing something wrong here or what?  I'm running multipool miner on MPH.  zpool is not in the bat file so, it only runs zpool for algo's not supported on MPH.  Anyway, Multiminer is reporting that I should be getting a profit of  .009 BTC per day (running for 4 days now) on one machine and another .008btc/day on another machine.  Both machines are on the same account at MPH, and I can see them as both active when I hunt the website to  see what algo's are being run.  However, my btc balance for a 24 hr period is only .0078btc.  That's pretty much 1/2 of what the  multiminer is predicting.    So is multiminer just blowing smoke up my a$$? or is something going wrong?  First two days I ran -multipoolhub,multipoolhubcoins,zpool.  Now i'm trying -multipoolhub,multipoolhubcoins but there's been no real difference at all (it was mostly mining MPH anyway before hand).

So why am I loosing 1/2 the expected btc/day rate?

Post your log onto GitHub and we can see if there are any issues with MultiPoolMiner itself.

Loses are expected but not half; takes hours (PPLNS system, coin confirmations, exchanges etc.) to appear in your BTC balance so you may want to wait a bit.

I'll post my log when I can later on tonight in about 4 hours give or take.  In the mean time, is there a way to allow lyra2z to run on GPU, but not on CPU?  Or can I run 2 instances of multiminer, one for cpu only and one for gpu only?