[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[flowerpower84]

Hi to all!
I have a Baikal Giant X10 miner and I need to set the starting difficulty for my worker that use Mining Pool Hub.
I see on my Baikal miner webpage this value for Diff1=4234.626709
What is this value? The difficulty used by my miner?
I don't have found my worker difficulty value on Mining Pool Hub web site.
If the Diff1 value is my woker difficulty, what I need to set in the password field (in the pool connection string) to set my starting difficulty?
Thank you in advance!

[1715383618]

1715383618

[1715383618]

1715383618

[1715383618]

1715383618

[1715383618]

1715383618

[freofreo]

At 1st set "Auto Exchange" to BTC.
At present time don't have enough for withdrawal.

Now changed to "Auto Exchange" to LTC.
Too soon to see any LTC.

Question - those BTC that have already been "Auto Exchanged", can they be "Auto Exchanged" to LTC?  Or do I need to let the BTC balance get large enough to make a withdrawal?  I.e.  so that the 0.0003 BTC fee isn't the same as my balance?

There's no menu on BTC wallet to move credits to auto exchanged. I think BTC are for withdrawal only.

[Christopher761]

What I'm going to do now is to mine Monacoin here on MPH for three days, then on suprnova for 3 days and then I'll compare average hashrates and profits.

Bad approach. If you want to compare 2 pools, you have to mine in parallel. Otherwise, the results are not comparable as the net difficulty in 4-6 days can be completely different from days 1-3!

You are right, I have not considered difficulty  change.
I'll do next: I'll run two instances of ccminer with 2 GTX 1070 each: 1. MPH, 2. Suprnova
24 h should be enough to make conclusions.

Please keep us updated on your test
Thanks

Sure, I'm already running the test. I'll update you tomorrow.
It would be nice if someone else could also run a similar test just to get statistics. As admins mentioned earlier (https://bitcointalk.org/index.php?topic=472510.4840), this is a known issue, but some users do not experience it.
I'm using tpruvot ccminer 2.2 and 372.54 nvidia driver. I wonder if it can be miner/driver versions dependent.

I have tested suprnova it worked out immediately - online pool hashrate catched up the miner speed for 1min after launched!!! Then even surpassed a little and after that it went equal with the miner speed

I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

If it ain't broke....

Seriously, if you have a 100 card server farm, you should leave it alone for now.  And then on a separate test machine with one card in it, you can play around with bios mods, new drivers (or block chain drivers) etc.  When you get the test bench running the way you want it, and if there is a statistically significant gain, then start porting the changes to your the rest of your rigs.

Otherwise, sit back, and monitor it.  Things will change all on their own, and everything will start crashing, without you changing anything. 

I had a rig running equihash mining zec on nanopool.  Dialed in the afterburner settings.  Everything was fine.  Left town for a 5 day trip, and everything crashed on day one.

By the way, I hate the way Microsoft updates production machines while they are working.  Next, I hate that afterburner doesn't necessarily restart the fan settings.  Sigh...

[flowerpower84]

New Baikal miner settings.

Please modify pool order for better efficiency. It's not mandatory but recommended.

1. Set each algo and server info in this priority order.
As x11 and qubit is mostly selected as profitable algo, it should be more efficient for pool and miner.

1 - x11 : stratum+tcp://hub.miningpoolhub.com:12007
2 - qubit : stratum+tcp://hub.miningpoolhub.com:12014
3 - quark : stratum+tcp://hub.miningpoolhub.com:12015
4 - x13 : stratum+tcp://hub.miningpoolhub.com:12008
5 - x15 : stratum+tcp://hub.miningpoolhub.com:12009



2. Set "ASIC Baikal - Quark, Qubit, x11, x13, x15" at Hub worker page.
https://miningpoolhub.com/?page=account&action=hubworkers


3. You can also set some coin (like Bitcoin) at Auto Exchange page to get all coins exchanged. (optional)
https://miningpoolhub.com/?page=account&action=autoexchange

Hi to all!
With this settings I can use the Auto Switch feauture of Mining Pool Hub?
With only one worker and Auto Switch feauture I can mine multi coins or I can mine the same coin with multi algorithms?
Thank you in advance!

[betiteh0777]

-a lyra2z

OK will do inform how it goes tomorrow

Can you do Lyra2Rev2 instead (vertcoin, monacoin)? This is the one we are having problems with at the moment.

Sure will switch to Lyra2Rev2 coin and see how it goes on Suprnova....so far Lyra2z is stable with online hashrates near to equal the miner hashrate

https://s19.postimg.org/y9huiyrcj/Capture2.jpg

[betiteh0777]

What I'm going to do now is to mine Monacoin here on MPH for three days, then on suprnova for 3 days and then I'll compare average hashrates and profits.

Bad approach. If you want to compare 2 pools, you have to mine in parallel. Otherwise, the results are not comparable as the net difficulty in 4-6 days can be completely different from days 1-3!

You are right, I have not considered difficulty  change.
I'll do next: I'll run two instances of ccminer with 2 GTX 1070 each: 1. MPH, 2. Suprnova
24 h should be enough to make conclusions.

Please keep us updated on your test
Thanks

Sure, I'm already running the test. I'll update you tomorrow.
It would be nice if someone else could also run a similar test just to get statistics. As admins mentioned earlier (https://bitcointalk.org/index.php?topic=472510.4840), this is a known issue, but some users do not experience it.
I'm using tpruvot ccminer 2.2 and 372.54 nvidia driver. I wonder if it can be miner/driver versions dependent.

I have tested suprnova it worked out immediately - online pool hashrate catched up the miner speed for 1min after launched!!! Then even surpassed a little and after that it went equal with the miner speed

I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Hi, how are you viewing your hashrate on the pool? I've just starting mining lyra2v2 and wanted to check it's working ok.

Sorry if this is such as n00b question, I've checked the MPH FAQ, my balance page is blank, and am out of ideas  

EDIT: Ok, I've waited a little longer now and some vertcoin ia showing up in my balance, it would still be nice to view the hashrate somehow.

https://s19.postimg.org/xl900a0f7/Capture5.jpg

[chiggx]

Which miner is more efficient for Nvidia cards, Multipool miner, Awesome miner of Nemosminer? MPH's FAQ has all 3 but it does not indicate which may be better than the other or better suited for each architecture

[betiteh0777]

Which miner is more efficient for Nvidia cards, Multipool miner, Awesome miner of Nemosminer? MPH's FAQ has all 3 but it does not indicate which may be better than the other or better suited for each architecture

I doubt any multi-miner which automatically switch altcoins to btc on small portions will be efficient with current btc fees......for example today, I needed 200USD cash out from my exodus btc wallet and been asket 45usd transfer fees ------->>>>>> tahts insane!!

[TheHypnoToad]

Hi, how are you viewing your hashrate on the pool? I've just starting mining lyra2v2 and wanted to check it's working ok.

Sorry if this is such as n00b question, I've checked the MPH FAQ, my balance page is blank, and am out of ideas  

For hash rate, look at the left menu, click on the coin you are mining then click on dashboard.
Total balances update is kinda slow. Account information on each coin's dashboard is much faster.

 

Thanks, I guess it's similar so suprnoca where each coin has it's own dash and stats.

It's kind of odd, I've been mining over around  3 hours now and my hashrate is 0 on both Monacoin and Vertcoin dashboards. I've checking my miner and it's been mining the lyra2v2 alsorithm non-stop. ccminer output:

Code:

[2017-12-11 18:37:57] accepted: 193/193 (diff 3.740), 202.11 MH/s yes!

However my balances for both coins have increased and are not 0.

I think it may be because I'm doing Multi-algo switch mining (Port 12XXX), maybe the hashrate for this is somewhere else?

Maybe I need to use the API key somehow?  

Which miner is more efficient for Nvidia cards, Multipool miner, Awesome miner of Nemosminer? MPH's FAQ has all 3 but it does not indicate which may be better than the other or better suited for each architecture

It depends on algorithm you are mining, I use DSTM miner for equihash and ccminer for the others.

[reset77x]

Which miner is more efficient for Nvidia cards, Multipool miner, Awesome miner of Nemosminer? MPH's FAQ has all 3 but it does not indicate which may be better than the other or better suited for each architecture

I doubt any multi-miner which automatically switch altcoins to btc on small portions will be efficient with current btc fees......for example today, I needed 200USD cash out from my exodus btc wallet and been asket 45usd transfer fees ------->>>>>> tahts insane!!

its because Exodus is a very bad wallet, always charging the highest possible transaction fee, you should use a wallet that let adjust the transaction fee

you can also use multi miners, and choose to be paid in Altcoins in most pools

MultiPoolMiner - NemosMiner - MegaMiner these 3 are the best, really similar, choose the one you like the most, Aaronsace is a very good developer

for sure ive been making much more money with MegaMiner in MiningPoolHub and AhashPool than mining individual coins in manual mode

[Atexor]

I've one question.I'm mining Monacoin and Vertcoin. My estimated rewards per 24h for 1 gpu are:
0.320528 Monacoin
0.591047 Vertcoin

I'm mining them using excavator + MultiPoolMiner and in last 24h I received:
0.10844352 Monacoin
0.22288436 Vertcoin

My earnings are almost 2x lower than expected. On previous days I got different proportions (MultiPoolMiner was chaning what to mine) but still the score was similar. Almost 2x lower.

I know about difficulty. I checked it multiple times. For Monacoin it's almsot constant and equals 65-75k in the last days.
Let's expect 80k. On Whattomine it's still a higher earnings than current. What's going wrong?

[TheHypnoToad]

I've one question.I'm mining Monacoin and Vertcoin. My estimated rewards per 24h for 1 gpu are:
0.320528 Monacoin
0.591047 Vertcoin

I'm mining them using excavator + MultiPoolMiner and in last 24h I received:
0.10844352 Monacoin
0.22288436 Vertcoin

My earnings are almost 2x lower than expected. On previous days I got different proportions (MultiPoolMiner was chaning what to mine) but still the score was similar. Almost 2x lower.

I know about difficulty. I checked it multiple times. For Monacoin it's almsot constant and equals 65-75k in the last days.
Let's expect 80k. On Whattomine it's still a higher earnings than current. What's going wrong?

What GPU and what if your hashrate?

[Atexor]

GTX 1080, hashrate 53mh/s in excavator miner, but I assumed 50mh/s for theoretical calculations (see whattomine on my link above).

By the way - it's minor in this case, hovewer 1MH/s = 1024*50 or 1000*50?

[crypper]

I've one question.I'm mining Monacoin and Vertcoin. My estimated rewards per 24h for 1 gpu are:
0.320528 Monacoin
0.591047 Vertcoin

I'm mining them using excavator + MultiPoolMiner and in last 24h I received:
0.10844352 Monacoin
0.22288436 Vertcoin

My earnings are almost 2x lower than expected. On previous days I got different proportions (MultiPoolMiner was chaning what to mine) but still the score was similar. Almost 2x lower.

I know about difficulty. I checked it multiple times. For Monacoin it's almsot constant and equals 65-75k in the last days.
Let's expect 80k. On Whattomine it's still a higher earnings than current. What's going wrong?

What GPU and what if your hashrate?

Dude,
I don't want to be rude, but careful examination of the first page of the thread and looking through at least the last 5 pages I believe is a must before asking questions on the forum (there is a big chance your question has been addressed; in fact it has).

[papampi]

-a lyra2z

OK will do inform how it goes tomorrow

Can you do Lyra2Rev2 instead (vertcoin, monacoin)? This is the one we are having problems with at the moment.

Yup, love to see lyra2rev2, mona or vtc

[BSA92]

At 1st set "Auto Exchange" to BTC.
At present time don't have enough for withdrawal.

Now changed to "Auto Exchange" to LTC.
Too soon to see any LTC.

Question - those BTC that have already been "Auto Exchanged", can they be "Auto Exchanged" to LTC?  Or do I need to let the BTC balance get large enough to make a withdrawal?  I.e.  so that the 0.0003 BTC fee isn't the same as my balance?

I have the same problem!
Admins, add please Auto exchange from Bitcoin

[freofreo]

GTX 1080, hashrate 53mh/s in excavator miner, but I assumed 50mh/s for theoretical calculations (see whattomine on my link above).

By the way - it's minor in this case, hovewer 1MH/s = 1024*50 or 1000*50?

mh/s to kh/s is *1000

I think 1024 thing is for storage (ram, hdd, etc) ...pretty confusing.

I'm using the 1060 hash rate about 24.35. Whattomine said I'd get 0.159/day. Whatimine is around 0.143 - 0.129 mona/day

[Minerdc]

I've one question.I'm mining Monacoin and Vertcoin. My estimated rewards per 24h for 1 gpu are:
0.320528 Monacoin
0.591047 Vertcoin

I'm mining them using excavator + MultiPoolMiner and in last 24h I received:
0.10844352 Monacoin
0.22288436 Vertcoin

My earnings are almost 2x lower than expected. On previous days I got different proportions (MultiPoolMiner was chaning what to mine) but still the score was similar. Almost 2x lower.

I know about difficulty. I checked it multiple times. For Monacoin it's almsot constant and equals 65-75k in the last days.
Let's expect 80k. On Whattomine it's still a higher earnings than current. What's going wrong?

Same here..they don't know the reason. Maybe..

[Atexor]

Dude,
I don't want to be rude, but careful examination of the first page of the thread and looking through at least the last 5 pages I believe is a must before asking questions on the forum (there is a big chance your question has been addressed; in fact it has).

No problem. I'm watching this thread regularly and noticed that somoeone noticed that too but withot bigger publicity. One guy said about other algo and other about idfference between pool and miner. That I know and noticed that with few pools with lbry, lyra2rev2 or equihash.

In this matter I ddin't even care that my hashrate on miningpoolhub is much lower than in miner because it switches between coins (pplns?). First page hasn't answers for this :/

GTX 1080, hashrate 53mh/s in excavator miner, but I assumed 50mh/s for theoretical calculations (see whattomine on my link above).

By the way - it's minor in this case, hovewer 1MH/s = 1024*50 or 1000*50?

mh/s to kh/s is *1000

I think 1024 thing is for storage (ram, hdd, etc) ...pretty confusing.

I'm using the 1060 hash rate about 24.35. Whattomine said I'd get 0.159/day. Whatimine is around 0.143 - 0.129 mona/day

Thanks. I though that it's SI too but I was not sure. As I see you've similar real scores to whattomine. A lbit ower but still in the margin of error. Not ~2x lower :/

Same here..they don't know the reason. Maybe..

Half year ago I mined Monacoin on suprnova (nowadays too) and I got much lower earnings too. With zencash, zec or others algo/coins I don't have that problem. I don't what what is the reason of it.

[aaronsace]

At 1st set "Auto Exchange" to BTC.
At present time don't have enough for withdrawal.

Now changed to "Auto Exchange" to LTC.
Too soon to see any LTC.

Question - those BTC that have already been "Auto Exchanged", can they be "Auto Exchanged" to LTC?  Or do I need to let the BTC balance get large enough to make a withdrawal?  I.e.  so that the 0.0003 BTC fee isn't the same as my balance?

I have the same problem!
Admins, add please Auto exchange from Bitcoin

It must be a very small amount that's hardly worth withdrawing; why not just leave it as BTC until you have enough?

You were the one that set it to BTC to begin with and you can also change to LTC another time.

There is no internal exchange and no Bitcoins are being mined so the pool would have to transfer the small amount all the way to an exchange.