[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[aaronsace]

Alright.  I"m trying to figure out if i'm doing something wrong here or what?  I'm running multipool miner on MPH.  zpool is not in the bat file so, it only runs zpool for algo's not supported on MPH.  Anyway, Multiminer is reporting that I should be getting a profit of  .009 BTC per day (running for 4 days now) on one machine and another .008btc/day on another machine.  Both machines are on the same account at MPH, and I can see them as both active when I hunt the website to  see what algo's are being run.  However, my btc balance for a 24 hr period is only .0078btc.  That's pretty much 1/2 of what the  multiminer is predicting.    So is multiminer just blowing smoke up my a$$? or is something going wrong?  First two days I ran -multipoolhub,multipoolhubcoins,zpool.  Now i'm trying -multipoolhub,multipoolhubcoins but there's been no real difference at all (it was mostly mining MPH anyway before hand).

So why am I loosing 1/2 the expected btc/day rate?

Post your log onto GitHub and we can see if there are any issues with MultiPoolMiner itself.

Loses are expected but not half; takes hours (PPLNS system, coin confirmations, exchanges etc.) to appear in your BTC balance so you may want to wait a bit.

I'll post my log when I can later on tonight in about 4 hours give or take.  In the mean time, is there a way to allow lyra2z to run on GPU, but not on CPU?  Or can I run 2 instances of multiminer, one for cpu only and one for gpu only?

You can edit/remove files in the folder called 'miners'.

[Korennya]

I believe there's a math error somewhere in multiminer.  I downloaded Nemos (which looks like it was written by the same authors as Multiminer) and it's benchmarking right now.  So far, the btc/day numbers are just about half that of Multiminer and I'd say about 95% accuracy to what I've been earning on MPH over the past 4 days.  I posted my last log file on Git as you requested.

[aaronsace]

I believe there's a math error somewhere in multiminer.  I downloaded Nemos (which looks like it was written by the same authors as Multiminer) and it's benchmarking right now.  So far, the btc/day numbers are just about half that of Multiminer and I'd say about 95% accuracy to what I've been earning on MPH over the past 4 days.  I posted my last log file on Git as you requested.

Cheers, I doubt there is a math error. I'll have a look at it now. 

[l33twannabe]

Korennya, have you been mining lyra2rev2 ? If yes then I (and many others here) had the same problem. MultiPoolMiner reported 0.0005BTC/day, but I was only getting half of it. Now I'm running xmrig + ccminer (lyra2z) only and my earnings from the last 24 hours are much higher (around ~0.0005BTC/day). There's some kind of issue with lyra2rev2, ccminer and this pool. I believe no one has found a solution yet.

[aaronsace]

Korennya, have you been mining lyra2rev2 ? If yes then I (and many others here) had the same problem. MultiPoolMiner reported 0.0005BTC/day, but I was only getting half of it. Now I'm running xmrig + ccminer (lyra2z) only and my earnings from the last 24 hours are much higher (around ~0.0005BTC/day). There's some kind of issue with lyra2rev2, ccminer and this pool. I believe no one has found a solution yet.

That may be part of the problem but they have also added algorithms from other pools. I've found a lot of there missing funds.

[SuperDerpBro]

How long does it take for a new rig to show up?

Using Multipoolminer and only the MPH pool (No zpool of hashrefinery). I've had a new rig up and running for more than 24 hours running only Equihash for now. It shows up in hub workers on the site but nothing in any of the Equihash graphs or in the miningpoolhubstats.com stats (Just multiples of my other rig). Losing my mind here and i keep checking the bat file over and over.. nothing i can see to change in it hehe :/

Powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet xxxxxxxxxxxxxxxxxxxxxxxxxxxx -username SuperDerpBro -workername DERPMiner -region US -currency btc,cad -type nvidia -poolname miningpoolhub -algorithm equihash -donate 5 -watchdog"

It shows up instantly in the workers section of the website. No idea how to confirm im getting credited for what it is doing. Though i do not feel like my profit has increased in the slightest. I keep checking the graphs for the coins it says its mining and only the other (1st) rig shows as ever doing any work. I cant see anything wrong with the batch file. I compared it to the one (1st rig) that is working and the only diff is the worker name and aglos.



Only this shows up on miningpoolhubstats.com  



Profit is the same as it is every day at this time with one rig running. FML

EDIT: It also isnt showing the profit predictions at the bottom of the powershell window. IT does for a few seconds. Then goes away.

[aaronsace]

How long does it take for a new rig to show up?

Using Multipoolminer and only the MPH pool (No zpool of hashrefinery). I've had a new rig up and running for more than 24 hours running only Equihash for now. It shows up in hub workers on the site but nothing in any of the Equihash graphs or in the miningpoolhubstats.com stats (Just multiples of my other rig). Losing my mind here and i keep checking the bat file over and over.. nothing i can see to change in it hehe :/

Powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet xxxxxxxxxxxxxxxxxxxxxxxxxxxx -username SuperDerpBro -workername DERPMiner -region US -currency btc,cad -type nvidia -poolname miningpoolhub -algorithm equihash -donate 5 -watchdog"

It shows up instantly in the workers section of the website. No idea how to confirm im getting credited for what it is doing. Though i do not feel like my profit has increased in the slightest. I keep checking the graphs for the coins it says its mining and only the other (1st) rig shows as ever doing any work. I cant see anything wrong with the batch file. I compared it to the one (1st rig) that is working and the only diff is the worker name and aglos.



Only this shows up on miningpoolhubstats.com  



Profit is the same as it is every days at this time with one rig running. FML

Here is where to look:

https://miningpoolhub.com/?page=account&action=balances

https://zcash.miningpoolhub.com/index.php?page=dashboard
https://zclassic.miningpoolhub.com/index.php?page=dashboard
https://bitcoin-gold.miningpoolhub.com/index.php?page=dashboard
https://zencash.miningpoolhub.com/index.php?page=dashboard

[SuperDerpBro]

Then it isn't working because nothing shows up or is any diff than with one rig. Just raising my power bill for funnzies i guess. w00t!

I can't figure it out.. do you see anything wrong here



Looks the same as when it mines for you! other than the name.

[Korennya]

Korennya, have you been mining lyra2rev2 ? If yes then I (and many others here) had the same problem. MultiPoolMiner reported 0.0005BTC/day, but I was only getting half of it. Now I'm running xmrig + ccminer (lyra2z) only and my earnings from the last 24 hours are much higher (around ~0.0005BTC/day). There's some kind of issue with lyra2rev2, ccminer and this pool. I believe no one has found a solution yet.

Yes I have been runnign lyra2v2 when MPM says it's more profitable than the other algo's.  Doesn't lyra2v2 work well enough on zpool or other pools?  Just an MPH issue?  Mine also runs excavator for lyra2v2.  Hashrate is 10MH/s higher with that vs ccminer.

Korennya, have you been mining lyra2rev2 ? If yes then I (and many others here) had the same problem. MultiPoolMiner reported 0.0005BTC/day, but I was only getting half of it. Now I'm running xmrig + ccminer (lyra2z) only and my earnings from the last 24 hours are much higher (around ~0.0005BTC/day). There's some kind of issue with lyra2rev2, ccminer and this pool. I believe no one has found a solution yet.

That may be part of the problem but they have also added algorithms from other pools. I've found a lot of there missing funds.

Those funds weren't missing.  I knew there were there and they were accoutned for.

[Suntzu88]

I having the same issues mining VTC and MONA  (Lyre2v2), but with ccminer 812_x64.  I'm putting out ~240 mh/s. MPH is only showing 160 mh/s

I'm not a fan of Suprnova for this algo but it is preforming lots better at the moment.

[SuperDerpBro]

Changed the name in the bat to DERP and it shows up quickly.



I dont get why it does not show up in the mining stats

https://www.reddit.com/r/MiningPoolHub/comments/7ip67p/php_page_that_you_can_use_to_monitor_earnings/

or on the main site as in an increase in hash rate or profit. Profit is the same as it would have been today with just one rig going. I guess it's time to move on

[aaronsace]

Changed the name in the bat to DERP and it shows up quickly.



I dont get why it does not show up in the mining stats

https://www.reddit.com/r/MiningPoolHub/comments/7ip67p/php_page_that_you_can_use_to_monitor_earnings/

or on the main site as in an increase in hash rate or profit. Profit is the same as it would have been today with just one rig going. I guess it's time to move on

Use the official website: https://miningpoolhub.com/

[SuperDerpBro]

Use it for what? It is impossible to actually gauge anything with it being so inaccurate and slow compared to what is actually happening on my machines

[aaronsace]

Use it for what? It is impossible to actually gauge anything with it being so inaccurate and slow compared to what is actually happening on my machines

What actually is the problem that you want to solve?

[SuperDerpBro]

A second rig has been running for over 24 hours.

Profit in the last 24 hours is the same as it was with one rig.

Second rig shows up in hub workers and nowhere else.

Second rig has only been mining equilhash.

Second rig does not show up anywhere as having mined any equilhash coins (graphs)

Site only ever shows hashrate for first rig

Impossible to tell wth is going on using the main site because it is too slow and inaccurate.

EDIT: Second rig is currently mining Bitcoin gold (and has been for a while) .. nothing shows up on the site

[mattsm]

Can you exchange bitcoin back to another coin? I don't see the auto-exchange option down there on that coin's page.

Just trying to get rid of that last BTC balance... would even donate it just want it gone.

Thanks ahead of time!

-M

[aaronsace]

A second rig has been running for over 24 hours.

Profit in the last 24 hours is the same as it was with one rig.

Second rig shows up in hub workers and nowhere else.

Second rig has only been mining equilhash.

Second rig does not show up anywhere as having mined any equilhash coins

Site only ever shows hashrate for first rig

Impossible to tell wth is going on using the main site because it is too slow and inaccurate.

First check that there is a worker setup on the pools:
https://zcash.miningpoolhub.com/index.php?page=account&action=workers
https://zclassic.miningpoolhub.com/index.php?page=account&action=workers
https://zencash.miningpoolhub.com/index.php?page=account&action=workers
https://bitcoin-gold.miningpoolhub.com/index.php?page=account&action=workers

Then check here to see if the hash rates throughout the day is consitant:
https://zcash.miningpoolhub.com/index.php?page=statistics&action=graphs
https://zclassic.miningpoolhub.com/index.php?page=statistics&action=graphs
https://zencash.miningpoolhub.com/index.php?page=statistics&action=graphs
https://bitcoin-gold.miningpoolhub.com/index.php?page=statistics&action=graphs

That should provide all the information you require to check the progress.

[aaronsace]

Can you exchange bitcoin back to another coin? I don't see the auto-exchange option down there on that coin's page.

Just trying to get rid of that last BTC balance... would even donate it just want it gone.

Thanks ahead of time!

-M

No, you must have put it in there as you can't mine Bitcoin.

[SuperDerpBro]

First check that there is a worker setup on the pools:

Second rig is not there. Only first.

Then check here to see if the hash rates throughout the day is consitant:

Nothing being mined by second rig

[aaronsace]

First check that there is a worker setup on the pools:

Not there

Then check here to see if the hash rates throughout the day is consitant:

Nothing being mined

If there is no worker then it needs adding. You can enter up to 20 characters.