[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Atexor]

I just installed this, I do like having the page darker, less eye strain when I check my balances before going to bed.

The Dashboard page has grey text though for the hashrates, can we lighten that up a little?

Thanks, fixed.
Offtopic: btw. I can recommend you f.lux program (or inbuild windows 10 but it's more poor). It helps in the evenings before go bed by reducing blue light from your display.

[ma3leemz]

don't know what went wrong but my musicoin mining went off track for the past 6 hours on the dashboard.
Though my miner was showing steady shares and speed - is this an issue on your side and will these 6 hours eventually show up

[salfter]

By the way, I hate the way Microsoft updates production machines while they are working.  Next, I hate that afterburner doesn't necessarily restart the fan settings.  Sigh...

That's why you don't use Windows on mining rigs. 

[Jamessuperfun]

don't know what went wrong but my musicoin mining went off track for the past 6 hours on the dashboard.
Though my miner was showing steady shares and speed - is this an issue on your side and will these 6 hours eventually show up

I had lots of Music on my Balance page, but now it's set to 0, and my auto exchange (BTC) hasn't gone up by close to that value. Maybe there are issues with Music right now?

Edit: Just came through as BTC

[lolmining]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

Video with old standard miner and older driver.

As you can see with
PL 100
GPU 100
RAM 770
hashrate never goes above 287MHs

Right now with latest drivers and 2-2fork miner and
PL 95
GPU 100
RAM 700
I got 353MHs.

Think about it.

Code:

[2017-12-11 17:59:56] GPU #3: EVGA GTX 1080 Ti, 70.99 MH/s
[2017-12-11 17:59:57] GPU #1: EVGA GTX 1080 Ti, 73.80 MH/s
[2017-12-11 18:00:01] GPU #4: EVGA GTX 1080 Ti, 69.55 MH/s
[2017-12-11 18:00:01] GPU #2: EVGA GTX 1080 Ti, 69.29 MH/s
[2017-12-11 18:00:01] GPU #0: EVGA GTX 1080 Ti, 70.94 MH/s
[2017-12-11 18:00:08] GPU #3: EVGA GTX 1080 Ti, 70.59 MH/s
[2017-12-11 18:00:09] GPU #1: EVGA GTX 1080 Ti, 73.43 MH/s
[2017-12-11 18:00:13] GPU #4: EVGA GTX 1080 Ti, 69.31 MH/s
[2017-12-11 18:00:13] GPU #2: EVGA GTX 1080 Ti, 69.73 MH/s
[2017-12-11 18:00:14] GPU #0: EVGA GTX 1080 Ti, 70.61 MH/s
[2017-12-11 18:00:21] GPU #3: EVGA GTX 1080 Ti, 70.31 MH/s
[2017-12-11 18:00:21] GPU #1: EVGA GTX 1080 Ti, 73.49 MH/s
[2017-12-11 18:00:22] accepted: 176/176 (diff 1.528), 353.37 MH/s yes!
[2017-12-11 18:00:22] GPU #2: EVGA GTX 1080 Ti, 69.64 MH/s
[2017-12-11 18:00:22] accepted: 177/177 (diff 3.568), 353.40 MH/s yes!

Dashboard reports even more:

https://imgur.com/a/SpWDR

[Cryptographertm]

so i guess my small amount of coin will be marooned on.. wherever it is indefinitely. I really dont have much hashrate, but I have <50 sia i auto exchanged for DGB. Im assuming theres no too many people doing that. So by what I've heard, if its not popular, there wont be much volume. and without the volume, MPH doesnt care enough to make the transfer happen.

[Cryptographertm]

..........................
I use ccminer-x64-2.2.3-cuda9 and NVIDIA driver version 23.21.13.8843 from 27/11/2017

Now there is new NVIDIA driver from 07/12/2017 but I can't decide do I want it or not, because finally I see what I should see.....

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

Video with old standard miner and older driver.

As you can see with
PL 100
GPU 100
RAM 770
hashrate never goes above 287MHs

Right now with latest drivers and 2-2fork miner and
PL 95
GPU 100
RAM 700
I got 353MHs.

Think about it.

Code:

[2017-12-11 17:59:56] GPU #3: EVGA GTX 1080 Ti, 70.99 MH/s
[2017-12-11 17:59:57] GPU #1: EVGA GTX 1080 Ti, 73.80 MH/s
[2017-12-11 18:00:01] GPU #4: EVGA GTX 1080 Ti, 69.55 MH/s
[2017-12-11 18:00:01] GPU #2: EVGA GTX 1080 Ti, 69.29 MH/s
[2017-12-11 18:00:01] GPU #0: EVGA GTX 1080 Ti, 70.94 MH/s
[2017-12-11 18:00:08] GPU #3: EVGA GTX 1080 Ti, 70.59 MH/s
[2017-12-11 18:00:09] GPU #1: EVGA GTX 1080 Ti, 73.43 MH/s
[2017-12-11 18:00:13] GPU #4: EVGA GTX 1080 Ti, 69.31 MH/s
[2017-12-11 18:00:13] GPU #2: EVGA GTX 1080 Ti, 69.73 MH/s
[2017-12-11 18:00:14] GPU #0: EVGA GTX 1080 Ti, 70.61 MH/s
[2017-12-11 18:00:21] GPU #3: EVGA GTX 1080 Ti, 70.31 MH/s
[2017-12-11 18:00:21] GPU #1: EVGA GTX 1080 Ti, 73.49 MH/s
[2017-12-11 18:00:22] accepted: 176/176 (diff 1.528), 353.37 MH/s yes!
[2017-12-11 18:00:22] GPU #2: EVGA GTX 1080 Ti, 69.64 MH/s
[2017-12-11 18:00:22] accepted: 177/177 (diff 3.568), 353.40 MH/s yes!

Dashboard reports even more:

https://imgur.com/a/SpWDR

^ I went to check out this guys link, tons of comments saying they were hacked for ethereum

just doing a public service post here. read that page before DLing whatever hes saying.

[lolmining]

^ I went to check out this guys link, tons of comments saying they were hacked for ethereum

I dont mine ethereum.
 

[Infpwnz]

I'm getting really bad stats on BTG.

My hashrate is 2030kh/s

Whattomine says i should be getting 0.057 BTG day
and I'm only getting 0.047

anyone else have issues with BTG pool?

[Cryptographertm]

^ I went to check out this guys link, tons of comments saying they were hacked for ethereum

I dont mine ethereum.
 

well you might want to remove that link so no one else clicks it.

[lolmining]

well you might want to remove that link so no one else clicks it.

I will not. Miner is working just fine.

[SeriousJohn]

i'd like to report that neither NemosMiner nor MultiPoolMiner get the correct profit data(btc/gh/day) and switching to less profitable algorithms. I reseted profit data several times on both.

[SeriousJohn]

i'd like to report that neither NemosMiner nor MultiPoolMiner get the correct profit data(btc/gh/day) and switching to less profitable algorithms. I reseted profit data several times on both.

They seem to have a very long delay now

[poby]

Mining BTG for an hour, still no sign of earnings?  It shows the hashrate reasonably accurately (7Kh/s), but zero earnings so far.  Nothing unconfirmed, nothing at all.  Is this normal for Bitcoin Gold?

[Infpwnz]

Mining BTG for an hour, still no sign of earnings?  It shows the hashrate reasonably accurately (7Kh/s), but zero earnings so far.  Nothing unconfirmed, nothing at all.  Is this normal for Bitcoin Gold?

Yes, completely normal, as long as ur hashrate is showing accurately you'll get ur btg.
it took me 6 hours once to update. Don't worry about it

[betiteh0777]

Sorry for my $0.02: you are using wrong miner and wrong driver. Therefore you are loosing approximately 18+% of hashing power  and profit (according to my calculations).

You have to use ccMiner 2.2 fork by Nanashi Meiyo-Meijin For MonaCoin Mining miner: just download it and rename to ccminer-x64.exe if necessary (f.e. minerwatcher.com service which I use requires it).

Driver also should be the latest: 388.59 gives the most hashrate in Lyra2re2 I've seen so far.

The miner I use is best for algo lyra2z not for -a lyra2re2 I do mine Zcoin which uses lyra2z. I use 23.21.13.8859 from 05/12/2017 NVIDIA driver already now (as you suggested) but don't see any major difference in hashrate in compare to  NVIDIA driver version 23.21.13.8843 from 27/11/2017

[manicdan]

By the way, I hate the way Microsoft updates production machines while they are working.  Next, I hate that afterburner doesn't necessarily restart the fan settings.  Sigh...

That's why you don't use Windows on mining rigs. 

I have 8 GPUs on my Windows 10 rig, I just turn off the miner for the primary 1080ti, and turn on whatever game I want. Right now its Destiny 2.
Thing is rock solid cause I do minimal overclocking, and have plenty of PSU power spare for loading up the CPU if needed. People crack up when they see me jumping between gaming and mining like its nothing.

I do need to disable all of the automatic updates. Damn fall creative update cost me 30$ in lost mining, plus hours of my time fixing drivers and settings.

I tried the whole linux thing, and I couldnt get it to boot

[mtx_demon]

Anybody using EthOS??

I am wondering how I need to setup my ccminer to auto switch

just list like proxypool1 proxypool2??
should be enough to the auto switch?

[vertices]

NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin.  I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good.   https://imgur.com/a/cC3G5

I also get a bunch of red errors about NiceHash.  I did delete the 2 Nicehash.ps1 files.  I was told to remove them. https://imgur.com/a/0HcsW

This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti.  Trying to get problems resolved before I move that miner off of VTC.

Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64

This is my batch file to start it.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog"

Here's a log file.     http://ge.tt/37QdNhn2

Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein


I tried searching this thread for excavator but only found 1 unrelated response.  I feel like I missed something stupid somewhere.  Thanks in advance.

[aaronsace]

NiceHash convert here, looking for some help please. I can't seem to get excavator to benchmark in MPM, note that it always just says "benchmarking" for any excavator algo and for some reason it always thinks Zcoin is the best, or just as good as Monacoin, even though MPH shows Zcoin less than half as good as Monacoin.  I put excavator in the bin folder. Path is ./bin/excavator/excavator.exe. I verified no AV is blocking anything, and permissions on the folder are good.   https://imgur.com/a/cC3G5

I also get a bunch of red errors about NiceHash.  I did delete the 2 Nicehash.ps1 files.  I was told to remove them. https://imgur.com/a/0HcsW

This is just my test system before I move it to my main miner. Test system is Windows 10 x64 with a 1070ti.  Trying to get problems resolved before I move that miner off of VTC.

Versions:
MultiPoolMinerV2.7.0.2
Tried excavator_v1.3.7a_NVIDIA_Win64 and excavator_v1.3.8a_NVIDIA_Win64

This is my batch file to start it.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -username *** -workername ***** -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,lyra2re2,neoscrypt,siaclaymore -donate 10 -watchdog"

Here's a log file.     http://ge.tt/37QdNhn2

Worker Job config at MPH:
NVIDIA - Cryptonight, Ethash, Equihash, Groestl, Lyra2RE2, Myriad-Groestl, NeoScrypt, Skein


I tried searching this thread for excavator but only found 1 unrelated response.  I feel like I missed something stupid somewhere.  Thanks in advance.

You've deleted the NiceHash API.

"Cannot find type [NiceHash]: verify that the assembly containing this type is loaded."