[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Myth888]

The profitability isn't the concern for me here - it is the fact that it is not working.

I am trying to build a wide spread portfolio of coins/tokens.  I do not plan to mine it for too long and will be switching back to Equihash soon.  I am already using the mobile miners - but thanks for the advice anyway.

i do not use nvidia cards but here is my epool setting for claymore. i have not mined it in a while though

POOL: ssl://asia.cryptonight-hub.miningpoolhub.com:20596, WALLET: username.id, PSW: x, ALLPOOLS: 1

Sorry cant be more help

[GedByrneUK]

The profitability isn't the concern for me here - it is the fact that it is not working.

I am trying to build a wide spread portfolio of coins/tokens.  I do not plan to mine it for too long and will be switching back to Equihash soon.  I am already using the mobile miners - but thanks for the advice anyway.

i do not use nvidia cards but here is my epool setting for claymore. i have not mined it in a while though

POOL: ssl://asia.cryptonight-hub.miningpoolhub.com:20596, WALLET: username.id, PSW: x, ALLPOOLS: 1

Sorry cant be more help

Thanks anyway.  Anyone else managed to get it working with xmr-stak or ccminer specifically with nVidia cards?

[Call_Me_Bambi]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

[GedByrneUK]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

Apologies for the delay in responding.

In ccminer I have the following :

%DWAL%  = <myetnaddresshere>
Fork = Klaust (have also tried several others)
Hash = cryptonight - xmr cryptonight
Wallet and worker template = %DWAL%.%WORKER_NAME%
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Extra Params =
Extra Arguments for miner =


In xmr-stak I have the following :

%DWAL% = <myetnaddresshere>
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Config Override =
AMD config override = "gpu_threads_conf" : [], "platform_index" : 0,
Nvidia config override = "gpu_threads_conf" :
[
  { "index" : 0, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 1, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 2, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 3, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 4, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 5, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 6, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 7, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 8, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 9, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
]
CPU config override =

[Call_Me_Bambi]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

Apologies for the delay in responding.

In ccminer I have the following :

%DWAL%  = <myetnaddresshere>
Fork = Klaust (have also tried several others)
Hash = cryptonight - xmr cryptonight
Wallet and worker template = %DWAL%.%WORKER_NAME%
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Extra Params =
Extra Arguments for miner =


In xmr-stak I have the following :

%DWAL% = <myetnaddresshere>
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Config Override =
AMD config override = "gpu_threads_conf" : [], "platform_index" : 0,
Nvidia config override = "gpu_threads_conf" :
[
  { "index" : 0, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 1, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 2, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 3, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 4, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 5, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 6, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 7, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 8, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 9, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
]
CPU config override =

[Electronium Mining]

I see you are using HiveOS, as a test to check your miner is setup OK stop using HiveOS and mine directly to MPH, this will eliminate the possibility that there is a problem with HiveOS.

This may make everything I've typed below moot, but MPH does not require an ETN address but a "Username.Workername", should your config not be (or is it a HiveOS thing):
"%DWAL% = <Username.Workername>" and not "%DWAL% = <myetnaddresshere>"

When you first run xmr-stax-win64 it will ask for some details and create various files, these can be later edited for your specific needs.
Files created:
amd.txt (or maybe nvidia.txt, I don't have an Nvidia card), config.txt and cpu.txt.

The amd.txt/nvidia.txt file lets you tweak the GPU performance.
The cpu.txt lets you tweak CPU mining parameters.
The config.txt for setting various miscellaneous parameters, such as display options.

I've only used xmr-stak-win64, latest V2.4.3 with AMD cards but the configuation should be the same for Nvidia (with minor chages).

Your xmr-stak configuration is somewhat different to mine, this is how I have it set up, just change anything that is Nvidia specific.
The following works for me and I see ETN in my MPH wallet.



The *.bat file; change --noNVIDIA to --noAMD, and remove --noCPU if you want CPU mining, --noUAC is to stop Windows10 asking for permission everytime I start it up on my Win10 rig and "timeout 3" is a 3 second delay before starting miner.

Code:

timeout 3
xmr-stak -C ETN.txt --noNVIDIA --noCPU --noUAC

The ETN.txt file. The only change here is "UserName.WorkerName" , change this to your User & Worker names.

Code:

"pool_list" :
[
	{"pool_address" : "europe.cryptonight-hub.miningpoolhub.com:20596", "wallet_address" : "UserName.WorkerName", "rig_id" : "", "pool_password" : "x", "use_nicehash" : false, "use_tls" : false, "tls_fingerprint" : "", "pool_weight" : 1 },
],

"currency" : "cryptonight",

Or you could use Claymore's Cryptonight miner it is easier to setup and is now free to use https://bitcointalk.org/index.php?topic=638915.0

Hope this helps.

[ermis1975]

Is there Metaverse alt coin to this pool?

[Bitcoin5678]

Someone got problems connecting to zcoin asia server?  Im having stratum fail while my rigs in Europe are still connected.

http://i64.tinypic.com/34rdtn8.jpg

[Myth888]

It seems eth really is paying lower at least for a few days. Tried to mine at same time on another pool. Avg here seems lower for now. I guess i would have to stay on the other pool with majority of my hash for a while.

[dragonmike]

Is the pool down?
Been trying to connect to the Cryptonight hubs but no luck for the past hour...

[mneehon]

Is the pool down?
Been trying to connect to the Cryptonight hubs but no luck for the past hour...

Mining Electroneum without issues.  us-east stratum.

[mneehon]

Has anybody tried to withdraw Electroneum (ETN)?

I'm mining it for about a day and having trouble setting up withdrawal address using Cryptopia wallet.

Also Electroneum transaction seems to requre "Payment ID" which I don't see a space to enter on MPH wallet/withdrawal page.

EDIT: Figured it out, it's on the ETN pool starting/news page:

paymentID: There are two cases.
 
First, when exchange site provides your paymentID: put your "address.paymentID" in a line.
Your coins would not be confirmed from your exchange site otherwise.

Second, local wallet or you don't need to put any paymentID. : Just input your wallet address only.

So both ETN address and paymentID need to go into the same field separated by dot.

[dobrMAN]

Hi all!
Somebody have issues with ethash servers? All servers resolve, but ping lost and miner don't connect...

[dragonmike]

Yeah, the Cryptonightv7 hubs don't work, pinging europe.cryptonight-hub.miningpoolhub.com:20580 and :17024 fails...

[Bitcoin5678]

Hi all!
Somebody have issues with ethash servers? All servers resolve, but ping lost and miner don't connect...

Got the same with lyra2z

[GedByrneUK]

I've been trying to mine Electroneum on MiningPoolHub (europe.cryptonight-hub.miningpoolhub.com:20596) using HiveOS with either xmr-stack or ccminer) but cannot get it to work at all.  I have 10 x nVidia GTX 1080 cards that appear to be hashing at around 650-680 H/s each but when I view the dashboard on MPH it does not show any hashing rate at all - nor does the worker show as being active.  Also, the balance for ETN does not increase despite leaving it running like this for a good 30 mins or so.

Is someone able to confirm that the pools are indeed active and what config settings I should be using?

thanks in advance

Post your current config settings for the miner(s) you are using, this will help us see if there is something up with your config, or if it maybe a pool problem.

Apologies for the delay in responding.

In ccminer I have the following :

%DWAL%  = <myetnaddresshere>
Fork = Klaust (have also tried several others)
Hash = cryptonight - xmr cryptonight
Wallet and worker template = %DWAL%.%WORKER_NAME%
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Extra Params =
Extra Arguments for miner =


In xmr-stak I have the following :

%DWAL% = <myetnaddresshere>
Pool URL = europe.cryptonight-hub.miningpoolhub.com:20596
Pass = x
Config Override =
AMD config override = "gpu_threads_conf" : [], "platform_index" : 0,
Nvidia config override = "gpu_threads_conf" :
[
  { "index" : 0, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 1, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 2, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 3, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 4, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 5, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 6, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 7, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 8, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
  { "index" : 9, "threads" : 24, "blocks" : 60, "bfactor" : 10, "bsleep" : 120, "affine_to_cpu" : false, "sync_mode" : 3, },
]
CPU config override =

[Electronium Mining]

I see you are using HiveOS, as a test to check your miner is setup OK stop using HiveOS and mine directly to MPH, this will eliminate the possibility that there is a problem with HiveOS.

This may make everything I've typed below moot, but MPH does not require an ETN address but a "Username.Workername", should your config not be (or is it a HiveOS thing):
"%DWAL% = <Username.Workername>" and not "%DWAL% = <myetnaddresshere>"

When you first run xmr-stax-win64 it will ask for some details and create various files, these can be later edited for your specific needs.
Files created:
amd.txt (or maybe nvidia.txt, I don't have an Nvidia card), config.txt and cpu.txt.

The amd.txt/nvidia.txt file lets you tweak the GPU performance.
The cpu.txt lets you tweak CPU mining parameters.
The config.txt for setting various miscellaneous parameters, such as display options.

I've only used xmr-stak-win64, latest V2.4.3 with AMD cards but the configuation should be the same for Nvidia (with minor chages).

Your xmr-stak configuration is somewhat different to mine, this is how I have it set up, just change anything that is Nvidia specific.
The following works for me and I see ETN in my MPH wallet.



The *.bat file; change --noNVIDIA to --noAMD, and remove --noCPU if you want CPU mining, --noUAC is to stop Windows10 asking for permission everytime I start it up on my Win10 rig and "timeout 3" is a 3 second delay before starting miner.

Code:

timeout 3
xmr-stak -C ETN.txt --noNVIDIA --noCPU --noUAC

The ETN.txt file. The only change here is "UserName.WorkerName" , change this to your User & Worker names.

Code:

"pool_list" :
[
	{"pool_address" : "europe.cryptonight-hub.miningpoolhub.com:20596", "wallet_address" : "UserName.WorkerName", "rig_id" : "", "pool_password" : "x", "use_nicehash" : false, "use_tls" : false, "tls_fingerprint" : "", "pool_weight" : 1 },
],

"currency" : "cryptonight",

Or you could use Claymore's Cryptonight miner it is easier to setup and is now free to use https://bitcointalk.org/index.php?topic=638915.0

Hope this helps.

Thanks for the info - I made a mistake with reporting my config having tried many different settings - my %DWAL% value was actually correctly setup as Username.Workername

I have not tried just yet, but i'm thinking I should disabled the CPU (for now) to see if minining with both GPU and CPU from the same miner is causing the issues.

[dragonmike]

Still can't resolve the host europe.cryptonight-hub.miningpoolhub.com:17024

What's going on?

[BitSoftGeek]

[ANN] zFastminer-v2.3.2 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****

Update May 4th: Updated Version Release: zFastminer-v2.3.2

Changelog:

• Fixed Stratum connection Bug.
• Added support for IP addresses as URL- please choose the best IP for you with the lowest ping.
• Attempt to reduce power spikes.
• Mining Rigs with less then 2 GPU's not Supported.
• Max GPU's support increased to 19 per Rig.
• '--hide-diff' is ON by default to reduce CPU usage.
• Small Reduction of the Intensity for better stability.
• Compiled with Cuda 9.2

Regarding power spikes:
We have looked about this issue with ccminer and found out that some users found solution by using '-plimit' option to limit the max power usage of the GPU's(in addition to MSI afterburner), you can set values per GPU like this:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581 -u USERNAME.NewWORKERNAME -p x -q -plimit 60,60,60,60,60,60,60,60

This sets 60% power limit for each GPU on a rig with 8 GPU's, try this option with your preferred power percentage

Regarding MPH ongoing maintenance and stratum connection issues:
We enabled using IP address as URL and now you can choose the best IP address with the lowest ping for you and you shouldn't have connection problem anymore.
For example:

Code:

zFastminer-v232 -a lyra2z -o stratum+tcp://139.162.132.70:20581 -u USERNAME.NewWORKERNAME -p x -q

List of IP addresses:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

How to Test Ping?:
Open command prompt/PowerShell and type:

Code:

ping us-east.lyra2z-hub.miningpoolhub.com

And you will see something like that:

Code:

Pinging us-east.lyra2z-hub.miningpoolhub.com [139.162.132.70] with 32 bytes of data:
Reply from 139.162.132.70: bytes=32 time=68ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55
Reply from 139.162.132.70: bytes=32 time=63ms TTL=55
Reply from 139.162.132.70: bytes=32 time=62ms TTL=55

ping europe.lyra2z-hub.miningpoolhub.com
Pinging europe.lyra2z-hub.miningpoolhub.com [139.162.46.14] with 32 bytes of data:
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=422ms TTL=51
Reply from 139.162.46.14: bytes=32 time=423ms TTL=51
Reply from 139.162.46.14: bytes=32 time=426ms TTL=51

Keep trying different IP's or URL's MPH URL's or choose from this list and test the ping:
https://check-host.net/check-dns?host=europe.lyra2z-hub.miningpoolhub.com

us-east.lyra2z-hub.miningpoolhub.com   
europe.lyra2z-hub.miningpoolhub.com
asia.lyra2z-hub.miningpoolhub.com
Until you find best IP address with the lowest ping and then use it in your .bat file.

Download zFastminer-v2.3.2

Code:

https://file.fm/f/dgqq53yn

HAPPY MINING
zFastminer team.


For the official announcement thread:
https://bitcointalk.org/index.php?topic=3259259.msg33955276

[Bitcoin5678]

Still can't resolve the host europe.cryptonight-hub.miningpoolhub.com:17024

What's going on?

https://check-host.net/check-dns?host=europe.cryptonight-hub.miningpoolhub.com

find an ip which is the fastest. copy and save it somewhere.

and change your host --> C:\Windows\System32\Drivers\etc
edit your host file and add    <saved ip>  europe.cryptonight-hub.miningpoolhub.com
save your file and try to run.
* do not put "#" in front of your IP in your host file *

[papampi]

Any plans to enable BTCP mining pool?

[dragonmike]

Still can't resolve the host europe.cryptonight-hub.miningpoolhub.com:17024

What's going on?

https://check-host.net/check-dns?host=europe.cryptonight-hub.miningpoolhub.com

find an ip which is the fastest. copy and save it somewhere.

and change your host --> C:\Windows\System32\Drivers\etc
edit your host file and add    <saved ip>  europe.cryptonight-hub.miningpoolhub.com
save your file and try to run.
* do not put "#" in front of your IP in your host file *

Why on earth do I have to do this crap?