[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[vkushta]

Hello,
I tried to contact MPH staff through mail with no success, so i hope one of them will read this...
Until now i was using auto exchange feature with ethereum as target coin. This morning i changed auto exchange and set ethereum classic as my new coin.
I went in my ethereum wallet and click right arrow to put my ETH balance on auto exchange wallet.
I got the usual message saying my transaction will be processed later. But it seems my ETH literally vanished in the air ! Nothing on auto exchange, nothing in transaction logs nowhere !
The amount i lost is around 0,0209 ETH. Can you tell me what happened ?
User name : Dalba

I have the same issue. Several hours ago I`ve done the same.
User Name: vkushta

Just checked my balance. Problem is solved.

[Mall20]

hi, please help me. Cant connect to pool. In claymore miner.. received unknown response, what is it?

We need a lot more information than that to help you. Post your Claymore config and bat file settings Claymore version and coin you are mining here so we can see where you may be going wrong.
Also post the error message you get, this can be helpful.

sry i thought that is it known issue.
What i tried problem is only at ETH and ETC. Mining ZEC works normal.
I using claymore dual v11.

error

Code:

ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:20555)
Received unknown response: {"id":null,"method":"mining.notify","params":["6beb","0xa83f767da1e573cefed9f44ba27d3758c8289ee7acbb67acd4c2129da2bdd255",
"0xa74dd84414948aba4bfd6580908dbf9c32a494aa336609746d19a35bb4cccb24","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}

bat

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20555 -ewal username.worker1 -epsw x -r 180 -tstop 65

username i change here..

[Call_Me_Bambi]

hi, please help me. Cant connect to pool. In claymore miner.. received unknown response, what is it?

We need a lot more information than that to help you. Post your Claymore config and bat file settings Claymore version and coin you are mining here so we can see where you may be going wrong.
Also post the error message you get, this can be helpful.

sry i thought that is it known issue.
What i tried problem is only at ETH and ETC. Mining ZEC works normal.
I using claymore dual v11.

error

Code:

ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:20555)
Received unknown response: {"id":null,"method":"mining.notify","params":["6beb","0xa83f767da1e573cefed9f44ba27d3758c8289ee7acbb67acd4c2129da2bdd255",
"0xa74dd84414948aba4bfd6580908dbf9c32a494aa336609746d19a35bb4cccb24","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7",true]}

bat

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool europe.ethash-hub.miningpoolhub.com:20555 -ewal username.worker1 -epsw x -r 180 -tstop 65

username i change here..

I think you are missing some bits from the comand line, if you check on https://ethereum-classic.miningpoolhub.com/ it give examples.
I tried this and it worked..

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us-east.ethash-hub.miningpoolhub.com:20555 -ewal User.Worker -eworker User.Worker -esm 2 -epsw x -allpools 1 -allcoins 1

[Mall20]

I think you are missing some bits from the comand line, if you check on https://ethereum-classic.miningpoolhub.com/ it give examples.
I tried this and it worked..

thx, the problem was the missing command  -esm 2

[sambonator]

hi,

I try to figure out how mininghubpool work. I have point my miners for Equihash to europe.equihash-hub.miningpoolhub.com:17023
It should mine Equihash.
I can see the money coming in and as its port 17023, it will switch between diffrent coins. But where can I see realtime which coin are my workers mining right now and see the realtime stats/hashrates?

https://miningpoolhubstats.com/

Check this page to see what you're mining.
https://miningpoolhub.com/?page=statistics&action=autoswitches

If its mining zcash, click on zcash and on the left pane click on workers or dashboard.
I've never found it to be very accurate though... its based on number of shares submitted over time and not actual hash rate. 

[zot57]

I have 4 rigs, but my 4th rig won't connect. I have the same mining software, same bat file except user and pass. Same rig setup.
But on 4th rig I keep getting can't connect to pool, what's the problem then? I can only connect up to 3 rigs?

my bat file (claymore): ZecMiner64.exe -zpool ssl://europe.equihash-hub.miningpoolhub.com:20575 -zwal username.rig -zpsw password -mport 0

And error:
https://s13.postimg.org/v2ajh9sc3/rrrr.png

[jkminkov]

same question asked in claymore thread, got some crap response...

my fix was to delete miner directory and use previous version.

you can try using us-east. or 17xxx ports if it doesn't work

[zot57]

I just moved other rig to suprnova pool, less hassle faster response (mine) 

[Lordas]

Why ETH fee is so high? tx fees are low for some time on the net..

[retard75]

It's kinda hilarious that for me as a European the asian server has a lower ping than the europe server. Just looked out of the window: yep, still Europe.
The pre-reflection of false facts to duff the pool fees is a criminal act under the Law Of Cryptotardia.

BEGONE!

[Ifreet]

Just looked out of the window: yep, still Europe.

I just lol'ed at this!

[kasparpalgi]

Watched tutorial video about setting up MultiPoolMiner (MPM) and there he suggested to remove from pools' list "miningpoolhubcoins" and leave just "miningpoolhub" and explained that "miningpoolhub" always works till end of your share so you get your share and "miningpoolhubcoins" may switch before you get your share and loose money. Is that true?

It's really hard to measure should one just leave the MPM do only Equihash or also other algos and keep switching. Would really love to find out what is most profitable with my 1070/80(ti) rigs. Should I use miningpoolhub or any other pool or let MPM to choose what pool to use? Should I have all algos or stick to the currenlty most profitable Equihash althouhj often Lyra2REv2 is much more profitable according to WhatToMine. But many say that you don't get your shares if you keep switching. Also MPM keeps switching between miners and sometimes for donation - not sure f that affects, too.

Really would love to hire someone who could help me to make my rigs max profitable.

[papampi]

Now you can set starting difficulty value by typing like "d=0.01" at worker's password.

This would help big hash miners to catch up to its own hardware limit faster than ever.

1. Run your miner program and check your difficulty value.
    Keep in mind that difficulty value must be stabilized.
    We recommend you to get difficulty value at least after 10 minutes of mining.

2. Set this difficulty value to worker's password as "d=XXXX"
   ex) d=0.0312
   Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.

3. Now run your miner program again.
   You will see your miner running at the difficulty value you typed.

4. Difficulty value can go up and down again. It's not a bug.
    d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.


Far wrong diff value may corrected automatically, but you'd better write optimized value.

Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.

Can anyone help me calculate my miners difficulty for equihash and above option ?

[GooglyPoop]

I'm not sure if this is the correct place to ask, so apologies if this doesn't belong here...

First off, I'm loving MPH. I appreciate everything that goes into running and maintaining such a service, so thank-you. Now, my question:

I'm mining EXP. My auto-withdrawls are going to a Poloniex wallet. It works out to one withdrawal per day. The past two days I have not been receiving my EXP on the Poloniex end (I've had no issues in the past). The MPH interface says that the transactions occurred and are confirmed. I am inclined to believe this is a Poloniex issue, but is there a chance it has anything to do with something on the backend of MPH? Thank-you for your time.

- GooglyPoop

[Tigggger]

If a block explorer says the transaction is confirmed and it's not showing in Poloniex it's probably an issue at their end.

I once had a decred deposit not show up there, their support form has an option for missing payments, mine was credited correctly within 24 hours of reporting it.

[GooglyPoop]

If a block explorer says the transaction is confirmed and it's not showing in Poloniex it's probably an issue at their end.

I once had a decred deposit not show up there, their support form has an option for missing payments, mine was credited correctly within 24 hours of reporting it.

Thank-you for confirming my suspicion. I submitted a ticket yesterday with Poloniex once noticing the issue.

[Call_Me_Bambi]

If a block explorer says the transaction is confirmed and it's not showing in Poloniex it's probably an issue at their end.

I once had a decred deposit not show up there, their support form has an option for missing payments, mine was credited correctly within 24 hours of reporting it.

Thank-you for confirming my suspicion. I submitted a ticket yesterday with Poloniex once noticing the issue.

Good luck with that. Poloniex are notorious for having transaction, in and out, getting stuck for weeks, if not months, at a time. Just check out all the happy people over here.. https://bitcointalk.org/index.php?topic=420836.3140

[ElEscalade777]

Hello people, and who extracts zcl, all the yield of recent days by 30 percent on a coin fell? What is it connected with? The difficulty of the network the last few days seems to be the same ...
And if earlier on whattomine I roughly converged, even more than 10 percent was, now it's almost minus 30%
Painting these last days:
https://cdn1.savepice.ru/uploads/2018/2/16/d2dfada55eb77a59bb777f50c8093507-full.jpg

[HavenZone]

Now you can set starting difficulty value by typing like "d=0.01" at worker's password.

This would help big hash miners to catch up to its own hardware limit faster than ever.

1. Run your miner program and check your difficulty value.
    Keep in mind that difficulty value must be stabilized.
    We recommend you to get difficulty value at least after 10 minutes of mining.

2. Set this difficulty value to worker's password as "d=XXXX"
   ex) d=0.0312
   Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.

3. Now run your miner program again.
   You will see your miner running at the difficulty value you typed.

4. Difficulty value can go up and down again. It's not a bug.
    d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.


Far wrong diff value may corrected automatically, but you'd better write optimized value.

Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.

Can anyone help me calculate my miners difficulty for equihash and above option ?

I've yet to get this to work... I tried that on a A3 and it still set the diff to 1 which makes it fail and drop out of MPH... Still hopeful they will get the A3 to work with MPH (its the only way to mine Sia now) Without support for the A3 they might as well just take down the Sia pool on the site.

[GEBucky]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.