[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[papampi]

Now you can set starting difficulty value by typing like "d=0.01" at worker's password.

This would help big hash miners to catch up to its own hardware limit faster than ever.

1. Run your miner program and check your difficulty value.
    Keep in mind that difficulty value must be stabilized.
    We recommend you to get difficulty value at least after 10 minutes of mining.

2. Set this difficulty value to worker's password as "d=XXXX"
   ex) d=0.0312
   Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.

3. Now run your miner program again.
   You will see your miner running at the difficulty value you typed.

4. Difficulty value can go up and down again. It's not a bug.
    d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.


Far wrong diff value may corrected automatically, but you'd better write optimized value.

Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.

Can anyone help me calculate my miners difficulty for equihash and above option ?

[GooglyPoop]

I'm not sure if this is the correct place to ask, so apologies if this doesn't belong here...

First off, I'm loving MPH. I appreciate everything that goes into running and maintaining such a service, so thank-you. Now, my question:

I'm mining EXP. My auto-withdrawls are going to a Poloniex wallet. It works out to one withdrawal per day. The past two days I have not been receiving my EXP on the Poloniex end (I've had no issues in the past). The MPH interface says that the transactions occurred and are confirmed. I am inclined to believe this is a Poloniex issue, but is there a chance it has anything to do with something on the backend of MPH? Thank-you for your time.

- GooglyPoop

[Tigggger]

If a block explorer says the transaction is confirmed and it's not showing in Poloniex it's probably an issue at their end.

I once had a decred deposit not show up there, their support form has an option for missing payments, mine was credited correctly within 24 hours of reporting it.

[GooglyPoop]

If a block explorer says the transaction is confirmed and it's not showing in Poloniex it's probably an issue at their end.

I once had a decred deposit not show up there, their support form has an option for missing payments, mine was credited correctly within 24 hours of reporting it.

Thank-you for confirming my suspicion. I submitted a ticket yesterday with Poloniex once noticing the issue.

[Call_Me_Bambi]

If a block explorer says the transaction is confirmed and it's not showing in Poloniex it's probably an issue at their end.

I once had a decred deposit not show up there, their support form has an option for missing payments, mine was credited correctly within 24 hours of reporting it.

Thank-you for confirming my suspicion. I submitted a ticket yesterday with Poloniex once noticing the issue.

Good luck with that. Poloniex are notorious for having transaction, in and out, getting stuck for weeks, if not months, at a time. Just check out all the happy people over here.. https://bitcointalk.org/index.php?topic=420836.3140

[ElEscalade777]

Hello people, and who extracts zcl, all the yield of recent days by 30 percent on a coin fell? What is it connected with? The difficulty of the network the last few days seems to be the same ...
And if earlier on whattomine I roughly converged, even more than 10 percent was, now it's almost minus 30%
Painting these last days:
https://cdn1.savepice.ru/uploads/2018/2/16/d2dfada55eb77a59bb777f50c8093507-full.jpg

[HavenZone]

Now you can set starting difficulty value by typing like "d=0.01" at worker's password.

This would help big hash miners to catch up to its own hardware limit faster than ever.

1. Run your miner program and check your difficulty value.
    Keep in mind that difficulty value must be stabilized.
    We recommend you to get difficulty value at least after 10 minutes of mining.

2. Set this difficulty value to worker's password as "d=XXXX"
   ex) d=0.0312
   Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.

3. Now run your miner program again.
   You will see your miner running at the difficulty value you typed.

4. Difficulty value can go up and down again. It's not a bug.
    d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.


Far wrong diff value may corrected automatically, but you'd better write optimized value.

Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.

Can anyone help me calculate my miners difficulty for equihash and above option ?

I've yet to get this to work... I tried that on a A3 and it still set the diff to 1 which makes it fail and drop out of MPH... Still hopeful they will get the A3 to work with MPH (its the only way to mine Sia now) Without support for the A3 they might as well just take down the Sia pool on the site.

[GEBucky]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

[X299]

Hello,

I have a little problem.
Every time I start the program, she does not want to start, does not want to go ... I receive the message Api pool has failed.

Does anyone know how to fix the problem?

https://s14.postimg.org/x72zlcpap/Miningpoolhub-has-failed.jpg

[Call_Me_Bambi]

Hello,

I have a little problem.
Every time I start the program, she does not want to start, does not want to go ... I receive the message Api pool has failed.

Does anyone know how to fix the problem?

There maybe some people here who know what your problem is but the rest of are not psychic, what program are you using, please tell us ?

EDIT: OK I see it's MultiPoolMiner, it just took a long time for the image to pop up - always does this with Bitcointalk.

[bomja]

Hello,
I have trouble with  "Debit_AP - confirmed- block #:  n/a"  two days can't receive my coints.
Tradesatoshi wallet.
Somebody have same issue?

Thanks in advance

[CryptoWaffle]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

[GEBucky]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

I actually found the answer to my question using the stats page with my api key - is giving much better results than the website pate. So far it appears it is hashing great. You should try it. Simple link to webpage - description is a page or two above but appears the internal site pages are not giving the correct stats.
https://miningpoolhubstats.com/USD/API_KEY  -  you api key is on your account page. I don't know how I managed to miss this for the last 6 months but is excellent, particularly when you use the login feature. Gives you virtually everything you would conceivably need from my perspective.

[HavenZone]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

I actually found the answer to my question using the stats page with my api key - is giving much better results than the website pate. So far it appears it is hashing great. You should try it. Simple link to webpage - description is a page or two above but appears the internal site pages are not giving the correct stats.
https://miningpoolhubstats.com/USD/API_KEY  -  you api key is on your account page.

if you are using multiple rigs you should check out awesome miner... we use it and it supports MPH along with other pools. Its great to just look in one place and see the status of all equipment and hash rate as well as earnings estimates. They have a free version but I think it only supports 2 or 3 rigs... It also does profit switching where it will move to the best payout option. Our GPU rigs tend to stay on MPH, but our ASIC rigs don't work well on MPH so it moves it to other pools. Its nice that it automates much of this. (a lot less babysitting than I used to do)

[GEBucky]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

I actually found the answer to my question using the stats page with my api key - is giving much better results than the website pate. So far it appears it is hashing great. You should try it. Simple link to webpage - description is a page or two above but appears the internal site pages are not giving the correct stats.
https://miningpoolhubstats.com/USD/API_KEY  -  you api key is on your account page.

if you are using multiple rigs you should check out awesome miner... we use it and it supports MPH along with other pools. Its great to just look in one place and see the status of all equipment and hash rate as well as earnings estimates. They have a free version but I think it only supports 2 or 3 rigs... It also does profit switching where it will move to the best payout option. Our GPU rigs tend to stay on MPH, but our ASIC rigs don't work well on MPH so it moves it to other pools. Its nice that it automates much of this. (a lot less babysitting than I used to do)

Interesting you say that - I had similar feedback from a pool operator on a different multipool site. I have had a miserable time with Awesome Miner with Antminers. My problem above was largely based on rentals on MRR, but I do have about 10 rigs (4 S9, 4 L3+, 2 GPU). I purchased the pro version and it constantly freezes my Antminers when I allow it to go into privileged mode on the API. They will run for awhile, but then just freeze and get a blank screen on the web api and have to reboot. I have tried what I think is everything (hard resets, etc) but just can't get it working right. All the Antminers are current firmware (many very new). I have also found the pool management functionality for Antimers to be terrible - really hard to get pool groups working, can't change worker fields easily (password, etc). I must be missing something so am very open to suggestions. I find the native Antminer pool management to work pretty well on mulitipools. Some of them (including MHP) seem to be not very graceful when switching coins and drops the connection, however Antminer pretty quickly reverts back to it after a minute or so. On other pools I don't get a drop at all when switching coins. I haven't really used my GPU's much but the Awesome Miner functionality does seem great for those. Waiting to get my solar system finished (25K Kwh) before firing them up. At .4c Kwh it's cheaper to rent than run my own (except the L3s) until I go solar in a couple of weeks. One thought, and haven't tried this yet, is to use AM in restricted mode (not privileged mode) on the Antminers so i can still see status, etc in one place, and also use it on my Claymore's once they are up-and-running. I rarely have an issue with the Antminers anyway (aside from Awesome Miner). I appreciate the feedback and any thoughts or suggestions would be very welcome!

Dave

[GEBucky]

I may need to temper the praise for the statistics page. It turns out, at least from everything that I can tell, Zencash can only handle 4 workers. I have 6 and the last two completely drop off reporting on the regular site and the statistic dashboard when it switches to that coin. It appears those 2 orphaned machines then go to much lower hash rate. When it goes back to Zcash all 6 show up again. Very odd. So I took the last two workers and just pointed them at the Zclassic pool and left the other for on the multi for now. Also needed to do a d=50K on both of the Zclassic rigs as they were not hashing well at all using normal vardiff. This seems like a pretty big miss that should be documented as i have been throwing god knows how much hash - I think Zclassic has the same 4 worker limitation. So 6 days where 6K of my Equihash was just being wasted from what I can tell.

Not sure if this could be naming convention issue - they are all username.bucky50 ... bucky55. May try to go back and just use straight numeric and see if that helps.

this is a pretty big miss unless it's just a reporting issue - but given that I was pointed to the statistics page as the source of truth, and it didn't show the 2 workers, I am thinking it may be worse than that.

[CryptoWaffle]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

I actually found the answer to my question using the stats page with my api key - is giving much better results than the website pate. So far it appears it is hashing great. You should try it. Simple link to webpage - description is a page or two above but appears the internal site pages are not giving the correct stats.
https://miningpoolhubstats.com/USD/API_KEY  -  you api key is on your account page. I don't know how I managed to miss this for the last 6 months but is excellent, particularly when you use the login feature. Gives you virtually everything you would conceivably need from my perspective.

my problem is not the stats, but the actual rewards... I couldnt care less about mph hashrate, what is getting in my wallet is the only thing I care and you should do the same.

[GEBucky]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

I actually found the answer to my question using the stats page with my api key - is giving much better results than the website pate. So far it appears it is hashing great. You should try it. Simple link to webpage - description is a page or two above but appears the internal site pages are not giving the correct stats.
https://miningpoolhubstats.com/USD/API_KEY  -  you api key is on your account page. I don't know how I managed to miss this for the last 6 months but is excellent, particularly when you use the login feature. Gives you virtually everything you would conceivably need from my perspective.

my problem is not the stats, but the actual rewards... I couldnt care less about mph hashrate, what is getting in my wallet is the only thing I care and you should do the same.

Oh I do - trust me! My point was that on that stats page is the actual and estimated earnings (whether you believe or not is another thing entirely). It's pretty detailed breakout by coins, profits earned, expected, etc. I don't have a dog in this fight was just trying to share some information that I found useful. That said, if your not happy with your returns move on! I am freaking pissed about the apparent "hidden" 4 worker limit on some of the Equihash coins. Looks like just chucked a weeks worth of about 6Khz down the toilet if it was on any coin other than Zcash. Nice.

[Biggen1]

My advice is to not even go to the actual pool homepage to check on your workers.  What I've been doing for several months is checking whattomine.com to see what I should be making per day in fiat.  Then I check https://miningpoolhubstats.com and see if my payouts are close to what whattomine.com shows.

I'm always within 10% of whattomine.com.  It's been over a month since I visited the actual MPH webpage.  I mine just Zclassic and have it set to autopayout.  It's totally cruise control and has been for months.

[MegoBasha]

Hi
is there something is wrong with ETH pool?
the miner is working but the dashboard shows 0MH and the graph is zeros for about 2 hours and yesterday was the same for about 4 hours
also there is no autoexchange
thanks
Mego