[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Mapuo]

Hi
is there something is wrong with ETH pool?
the miner is working but the dashboard shows 0MH and the graph is zeros for about 2 hours and yesterday was the same for about 4 hours
also there is no autoexchange
thanks
Mego

Look at the balance. Dashboard on MPH always is incorrect. For autoexchange - did you set it?

[sedde]

For all the guys looking for an XVG pool.

We created one, only 0.3% fees, and pplns.


Join us today!

https://coinfoundry.org/pool/xvg2

[HavenZone]

Have used MHP for quite awhile and always been happy. Not sure this is the right forum but question for pool operator. I know there is a lag in the hash reporting. But I am running 6 rigs on Equihash at roughly 20K. Having a hard time finding any evidence (graphs, workers, etc) that I am getting anywhere near that. On certain coins some of the 6 workers don't ever show up. On Zcash I see all 6 and also see it go up close to 20. But on all the other 3 coins I only see 3 - 4 workers on the historic graph and 11K max. And appears like a brutally slow ramp up of hash on coin switch. All rigs are MRR and correctly pointed from a geo perspective. Have no manual diff settings. Is it all good or am I tossing hash away as can't see much going above 11K. If it's just a reporting issue then no issue. Main worker name same as handle here.

yeah something is wrong with MPH, me and my friends are having the same problem and you should try to move your cards on another algo.

We had a great (but short) run with this pool but its time to move our hashrate somewhere else since they cant fix this issue.

I actually found the answer to my question using the stats page with my api key - is giving much better results than the website pate. So far it appears it is hashing great. You should try it. Simple link to webpage - description is a page or two above but appears the internal site pages are not giving the correct stats.
https://miningpoolhubstats.com/USD/API_KEY  -  you api key is on your account page.

if you are using multiple rigs you should check out awesome miner... we use it and it supports MPH along with other pools. Its great to just look in one place and see the status of all equipment and hash rate as well as earnings estimates. They have a free version but I think it only supports 2 or 3 rigs... It also does profit switching where it will move to the best payout option. Our GPU rigs tend to stay on MPH, but our ASIC rigs don't work well on MPH so it moves it to other pools. Its nice that it automates much of this. (a lot less babysitting than I used to do)

Interesting you say that - I had similar feedback from a pool operator on a different multipool site. I have had a miserable time with Awesome Miner with Antminers. My problem above was largely based on rentals on MRR, but I do have about 10 rigs (4 S9, 4 L3+, 2 GPU). I purchased the pro version and it constantly freezes my Antminers when I allow it to go into privileged mode on the API. They will run for awhile, but then just freeze and get a blank screen on the web api and have to reboot. I have tried what I think is everything (hard resets, etc) but just can't get it working right. All the Antminers are current firmware (many very new). I have also found the pool management functionality for Antimers to be terrible - really hard to get pool groups working, can't change worker fields easily (password, etc). I must be missing something so am very open to suggestions. I find the native Antminer pool management to work pretty well on mulitipools. Some of them (including MHP) seem to be not very graceful when switching coins and drops the connection, however Antminer pretty quickly reverts back to it after a minute or so. On other pools I don't get a drop at all when switching coins. I haven't really used my GPU's much but the Awesome Miner functionality does seem great for those. Waiting to get my solar system finished (25K Kwh) before firing them up. At .4c Kwh it's cheaper to rent than run my own (except the L3s) until I go solar in a couple of weeks. One thought, and haven't tried this yet, is to use AM in restricted mode (not privileged mode) on the Antminers so i can still see status, etc in one place, and also use it on my Claymore's once they are up-and-running. I rarely have an issue with the Antminers anyway (aside from Awesome Miner). I appreciate the feedback and any thoughts or suggestions would be very welcome!

Dave

The only antminers I had an issue with in awesome miner was the S9 but I think that is due to the very long boot time with their auto adjust. AM works great with my L3s and D3s (try not to run those) ... I dont use it for switching on the A3s since there really is no difference what pool they use. I pretty much stay in MPH with my GPU rigs but it will change from time to time. try it with just your L3s and not the S9s... just change the password on the S9s and it wont be able to go into priv mode. I have our L3s going to 7 different pools and never had an issue with AM with them.

[Pyroboby7]

Does anyone have any information on pulling transaction data?  It seems api calls only report the latest 30 or so transactions and there isn't an export option on the transaction page.

[CryptocoreX]

@Pool Operator: Why does the Auto Exchange not change Adz Coin vs. Sia. Balance stuck in Auto-Exchange Wallet and not going to the Exchange itself. Why? Could you help me?

[MegoBasha]

Hi
is there something is wrong with ETH pool?
the miner is working but the dashboard shows 0MH and the graph is zeros for about 2 hours and yesterday was the same for about 4 hours
also there is no autoexchange
thanks
Mego

Look at the balance. Dashboard on MPH always is incorrect. For autoexchange - did you set it?

many thanks for your kindly replay

there is no eth balance
no balance at the autoexchange wallet (I set it to ETC)
the Last 24 Hours income was lower than everyday for both ETH and ETC in both of MPH dashboard and whattomine
while claymore works fine and gives me that Share accepted as usual

it was the same issue the past 2 days
the graph drops at the hour 18 to the hour 22 then works fine afterword

many thanks
Mego

[hideoto]

Hi
is there something is wrong with ETH pool?
the miner is working but the dashboard shows 0MH and the graph is zeros for about 2 hours and yesterday was the same for about 4 hours
also there is no autoexchange
thanks
Mego

I have zero info on my Verge mining efforts (2h so far).
Nothing on the dashboard, workers overview, balance, miningpoolhubstats with the api key  

[malthrax]

Does anyone have any information on pulling transaction data?  It seems api calls only report the latest 30 or so transactions and there isn't an export option on the transaction page.

Not a feature offered by the site.

[kusarigama]

Just start using MiningPoolHub and I don't know how the Auto switching ports per algo works, I'm currently using port : 17023.
Zclassic is almost always the most profitable but not with equihash auto switching..
Currently set with Zcash with a ratio of 0.37412 compare to 0.44332 for Zclassic..
So the switching doesn't work ? 

[GEBucky]

Just start using MiningPoolHub and I don't know how the Auto switching ports per algo works, I'm currently using port : 17023.
Zclassic is almost always the most profitable but not with equihash auto switching..
Currently set with Zcash with a ratio of 0.37412 compare to 0.44332 for Zclassic..
So the switching doesn't work ? 

It works fine for me - it moves between the 4 supported coins pretty frequently - less so with ZenCash than the other 3 lately. I have quite a bit of Equihash pointed their way auto exhanging and paying out in Zclassic to do the hard fork play (like we need another fork). Unless you have a GPU miner (can support algo switching) then you are using the right port for Auto switching. Not sure where you are getting your rates, but my experience is they are pretty good on the switching and profit side for EQH. Let it run for 2 days to get a normalized result on day 2 payout and can then get a better sense and can so a comparison. Or you if you have multiple rigs can point at one to a pure Zclassic pool and compare. They have a statistics page (not part of the main site - you can see it in the FAQs - that will show you returns by coin and time. Worth a look.

[groove_master]

They say this pool sucks for zclassic, although I'm giving it a try anyway because I happen to have some really good connection with one of its servers from my location. What's your opinion, does it suck?

[crystal5377541]

Hi everyone. Please help me with autoexchange. Don't understand. At first i set autoexchange etn to zcash. Ok, right. Then move mined coins to autoexchange wallet and nothing happens for 10 hours. What am i doing wrong? Month ago i changed some zcl to zcash but didn't mind how did that. Help please, tell what i missed. Thanks.

UPD: Coins are moved to autoexchange wallet, but not to "on exchange"

[CryptoWaffle]

They say this pool sucks for zclassic, although I'm giving it a try anyway because I happen to have some really good connection with one of its servers from my location. What's your opinion, does it suck?

now it sucks.

[Biggen1]

They say this pool sucks for zclassic, although I'm giving it a try anyway because I happen to have some really good connection with one of its servers from my location. What's your opinion, does it suck?

Been mining Zclassic for two month straight and it works excellent.

People that can't do shit right are the ones complaining about MPH.

[groove_master]

Yes, zclassic is good. Although now there are problems with cryptopia and the new wallets are a bit fucked up before the fork. How about the zcash? So far, it does not look so stellar for me.

[Whatt]

Hi everyone. Please help me with autoexchange. Don't understand. At first i set autoexchange etn to zcash. Ok, right. Then move mined coins to autoexchange wallet and nothing happens for 10 hours. What am i doing wrong? Month ago i changed some zcl to zcash but didn't mind how did that. Help please, tell what i missed. Thanks.

UPD: Coins are moved to autoexchange wallet, but not to "on exchange"

ETN (electroneum) is not auto-exchanged on MPH. Mostly due to the fact ETN is not on very many exchanges to begin with and definitely not on the 3 exchanges MPH uses.
ETN is more of a "hold on to coin" right now. While it's Dev's are starting to get it listed on more exchanges and it is has a moblie wallet launching (things still in "beta" according to the ETN site)

Best bet for ETN is either stop mining it (have yet to see it get switched to in profit-switching) or get either the desktop or paperwallet and HODL.

Myself, I mine it with multiple cpu's in my house when they are idle and end up with 50-ish coins every few days I transfer into my own wallet, betting on the coin will take off.

[jkminkov]

They say this pool sucks for zclassic, although I'm giving it a try anyway because I happen to have some really good connection with one of its servers from my location. What's your opinion, does it suck?

Been mining Zclassic for two month straight and it works excellent.

People that can't do shit right are the ones complaining about MPH.

stats don't lie, check the 4 weeks, compare pool luck to zcash https://zclassic.miningpoolhub.com/index.php?page=statistics&action=blocks 4,54% vs. 1.03%

cause is either lower resources are committed to zcl or zcl daemon is worse than zcash, the latter can be checked with looking at other pools' stats.

[kasparpalgi]

They say this pool sucks for zclassic, although I'm giving it a try anyway because I happen to have some really good connection with one of its servers from my location. What's your opinion, does it suck?

Been mining Zclassic for two month straight and it works excellent.

People that can't do shit right are the ones complaining about MPH.

stats don't lie, check the 4 weeks, compare pool luck to zcash https://zclassic.miningpoolhub.com/index.php?page=statistics&action=blocks 4,54% vs. 1.03%

cause is either lower resources are committed to zcl or zcl daemon is worse than zcash, the latter can be checked with looking at other pools' stats.

What pool are you comparing here to?

[browned]

For all the guys looking for an XVG pool.

We created one, only 0.3% fees, and pplns.


Join us today!

https://coinfoundry.org/pool/xvg2

Does it support XSH, Shield as well?

[browned]

ADD pool XVG Verge-Blake 2s

PS sia, dcr LBC = not GPU  

Now that Claymore 11 supports blake2s and keccak algorithms there is a massive increase in mining capacity looking for a stable xvg verge , xsh shield blake2s pool. Current antmine, umining, and nlpool.nl are not able to cope with the number of claymore users.

Decred, Siacoin, Lbry, Pascal provide little return with Claymore now. MPH can you add verge and shield on blake2s.