Execoin: | First Open-Source Stealth Wallet Released! | Fast | ASIC-proof

[gsupp]

Coinwarz says the 24 hour exchange volume for Execoin has been:

68.51 BTC / 939,089.11 EXE

 

[spikers]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

[jjc6676]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

[spikers]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

[gsupp]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

That's awesome!! Triple merge mining EXE/MON/PLX!

[vindyne8]

Coinwarz says the 24 hour exchange volume for Execoin has been:

68.51 BTC / 939,089.11 EXE

 

Just getting started!

[jjc6676]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

Thanks - it is working now!

[jjc6676]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

Thanks - it is working now!

Another issue - My WU is around 50%. I am using the same settings that I have been using when mining exe from the release date.
Is this an issue with the pool?

[Mcpeanut]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

Thanks - it is working now!

Another issue - My WU is around 50%. I am using the same settings that I have been using when mining exe from the release date.
Is this an issue with the pool?

Set queue to 0 and scan-time to 1 if you haven't already.

[jjc6676]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

Thanks - it is working now!

Another issue - My WU is around 50%. I am using the same settings that I have been using when mining exe from the release date.
Is this an issue with the pool?

Set queue to 0 and scan-time to 1 if you haven't already.

I believe that has resolved it. Apparently if you rename your worker a few times (like I did) the worker name stays on your stats page.....I only have two but since I renamed it shows more lol - are you able to reset my worker names? Or clear the ones im not using?

[Mcpeanut]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

Thanks - it is working now!

Another issue - My WU is around 50%. I am using the same settings that I have been using when mining exe from the release date.
Is this an issue with the pool?

Set queue to 0 and scan-time to 1 if you haven't already.

I believe that has resolved it. Apparently if you rename your worker a few times (like I did) the worker name stays on your stats page.....I only have two but since I renamed it shows more lol - are you able to reset my worker names? Or clear the ones im not using?

I'm not the pool operator It'll probably clear after it's inactive for awhile though. If not I'm sure spikers can clear it up.

[spikers]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

I cannot get ppagent to work like I have on simplevert before when I mined there

It was disabled, now it should work, I've just enabled it. Port 4444.
Thank you for your feedback!

Thanks - it is working now!

Another issue - My WU is around 50%. I am using the same settings that I have been using when mining exe from the release date.
Is this an issue with the pool?

Set queue to 0 and scan-time to 1 if you haven't already.

I believe that has resolved it. Apparently if you rename your worker a few times (like I did) the worker name stays on your stats page.....I only have two but since I renamed it shows more lol - are you able to reset my worker names? Or clear the ones im not using?

I'm not the pool operator It'll probably clear after it's inactive for awhile though. If not I'm sure spikers can clear it up.

I'll take a look. There is some sort of cleanup, but it may take some time!
As I can see - we found 1st EXE block. Need more hashrate to start finding MON/PLX, diff is high!!!

[CryptoGuy]

http://exemerged.poolz.net/ - First triple EXE/MON/PLX non p2p mining pool! Rocket up your mining revenues!
Still in testing mode, needs a lot of hashrate (MON diff is quite high), please don't forget to setup a backup pool!
Payments every 30 minutes after block confirmation (EXE - 120 blocks, MON - 100 blocs, PLX - 300 blocks).

PM me or post your comments here.

That's awesome!! Triple merge mining EXE/MON/PLX!

It seems the merged mining is working, just found a PLX block. We could use some more hash over there, why wouldn't you want free extra income from 2 other coins?

[Calhil]

Extra coins from merged mining arent exactly free, right now pool luck is below 50%. So in practice youre trading 50+% of your EXE for MON and PLX.

[spikers]

Extra coins from merged mining arent exactly free, right now pool luck is below 50%. So in practice youre trading 50+% of your EXE for MON and PLX.

Pool Luck
119.29%

So - in fact, it finds even more EXE blocks, than it should, in average according to the hashrate.
This figure will be closer to 100% on larger number of blocks found.
In other words, EXE efficiency is not affected by merged mining, and MON/PLX blocks come as a bonus without affecting EXE efficiency in any negative way.
By the way, efficiency of any pool on EXE with 45 seconds blocks should be a bit less (maybe, a couple of percents) than expected because of quick blocks (fast network synchronization issue), and this is normal.

Meanwhile, first payouts have been made, please check your wallets.

[Doom4535]

Does anyone know if there is a easy way to determine the luck of a p2pool node or will I need to just go ahead and make a scrypt that runs through my logs...?  I seem to be doing pretty well by my guestimations...

[thaitunhi1606]

Plz help me.
I run exe with 270 = 200kh/s and 7950 = 300kh/s. Very slow.  

[gsupp]

Plz help me.
I run exe with 270 = 200kh/s and 7950 = 300kh/s. Very slow.  

This is normal. You will get approximately 50% of the Scrypt hash rate when mining Scrypt-N.

[shango]

Plz help me.
I run exe with 270 = 200kh/s and 7950 = 300kh/s. Very slow.  

This is normal. You will get approximately 50% of the Scrypt hash rate when mining Scrypt-N.

The main page of Execoin.com explains it : http://www.execoin.net/index.html

[CryptoGuy]

Does anyone else run any 6870's? I can't seem to squeeze more than 110-115kh out of each. I can push 340kh with scrypt.