miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 04, 2014, 03:13:56 PM |
|
Thanks.
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 04, 2014, 06:49:39 PM |
|
Would it be possible to go into detail for wiring the PCIE cable to 2.5mm Plug for the miners. I want to use an extra psu i have lying around but I am worried I might fry the Miner, also What type of power supply does the WIIDevice take. Can I do the same thing with it from the PSU as the miners or do I need something else specific.
Thanks
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 04, 2014, 07:45:35 PM Last edit: March 17, 2014, 08:17:35 PM by miaviator |
|
Part 3B: Wiring your own Molex or PCI-E power connectors AT YOUR OWN RISKWould it be possible to go into detail for wiring the PCIE cable to 2.5mm Plug for the miners. I want to use an extra psu i have lying around but I am worried I might fry the Miner, also What type of power supply does the WIIDevice take. Can I do the same thing with it from the PSU as the miners or do I need something else specific.
Thanks
Sample Molex HomeBrew (Electric Tape)I am not trying to dissuade anyone from making their own cables or selling to others if that is is your goal. But please, please overbuild them at a minimum. I have been doing this for two years now with many hundreds of cables in the wild on many different platforms. Just follow that small bit of advice for safety sake. Know what wire gauges and connectors you are using and what they are capable of and please afford yourself 10-20% headroom just in case. With the sizes of the farms I am seeing, fire is a real concern. Be safe and happy mining. The watts for the Gridseed 5 is: 8 watts for LTC only 52 watts for BTC only 60 watts for combined BTC/LTC Using a 12 volt power supply, the amount of amps is: 0.66a LTC only 4.33a BTC only 5.00a Combined BTC/LTC Based upon this chart http://www.powerstream.com/Wire_Size.htmThe recommended gauge wire is: 23 gauge for 0.729 amps (0.66 required for LTC only) 15 gauge for 4.7 amps (4.33 required for BTC only) 14 gauge for 5.9 amps (5.00 required for combined BTC/LTC). Given that the gauges are conservative, you can probably get by with 24 gauge (.577 amps) for LTC only mode, and 15 gauge for combined mining. Note: If you use 23 gauge wire, and inadvertently invoke BTC mode, you risk melting the wire. For Dual mode you can safely run 3 miners per PCI-E For Scrypt mode you can run at least 10 per PCI-E 1-5 per molex. You could run 10 on molex but I wouldn't take it that high as you could then load 1 PSU lead to 400Watts and burn down the building. The hub and gridseeds are 12v http://www.moddiy.com/pages/Power-Supply-Connectors-%26-Pinouts.htmlThe RED wire on the gridseed plugs (center of the barrel) is +12v which makes the white wire (outside of the barrel) ground The wiibox/tplink controllers are 5v USB http://pinoutsguide.com/Running the LighteningAsic Controller off the 12v supply (Same thing runs a Raspi in real life) Perfect thank you,
Let me see if I understand this, PCIE, I would be able to wire 3 Miners up to, and if I ran a IDE molex to the IDE plug on my modular PSU, the red wire with a ground will provide 5V of power to the WIIContrller
EDIT: http://retroblast.arcadecontrols.com/articles/coindoor.htmlRed and Black yes.
|
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 04, 2014, 07:49:37 PM |
|
just what I needed thanks
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 04, 2014, 07:54:11 PM |
|
Perfect thank you,
Let me see if I understand this, PCIE, I would be able to wire 3 Miners up to, and if I ran a IDE molex to the IDE plug on my modular PSU, the red wire with a ground will provide 5V of power to the WIIContrller
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 04, 2014, 07:57:12 PM |
|
Perfect thank you,
Let me see if I understand this, PCIE, I would be able to wire 3 Miners up to, and if I ran a IDE molex to the IDE plug on my modular PSU, the red wire with a ground will provide 5V of power to the WIIContrller
EDIT: http://retroblast.arcadecontrols.com/articles/coindoor.htmlRed and Black yes.
|
|
|
|
smtn512
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 04, 2014, 10:20:42 PM |
|
I know I read it in one of the gridseed threads somewhere, but I cant seem to find it now. Can anyone tell me what the specific power requirements of a 5 chip Gridseed device is? Thanks.
|
|
|
|
joeventura
|
|
March 04, 2014, 10:51:50 PM |
|
Can someone name a make and model of USB hub that is working well for them?
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 04, 2014, 10:57:02 PM |
|
ok so i have everything powered up the Wiicontroller has a green led on it and the miner has a green flashing led on it I have one more noob question: How do i find the ip address of my wiicontroller box I used wiibox.net got the ip but when i type it in it the browser just keeps trying to access it but nothing is coming up
|
|
|
|
chanberg
|
|
March 04, 2014, 11:31:55 PM |
|
ok so i have everything powered up the Wiicontroller has a green led on it and the miner has a green flashing led on it I have one more noob question: How do i find the ip address of my wiicontroller box I used wiibox.net got the ip but when i type it in it the browser just keeps trying to access it but nothing is coming up
if your on a mac, i downloaded this program from the appstore called ip scanner home - basically scans everything on your network and even tells you what device they are, from cellphones to apple tvs... Pretty nice program I'm sure there are windows variants on the web
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 04, 2014, 11:44:10 PM |
|
ok everything is working but the its all in chinese, cant make sense of most of that ip page
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 04, 2014, 11:51:37 PM Last edit: March 05, 2014, 12:04:54 AM by SummersideGuy |
|
Is it possible to plug 1 miner directly into the WIIBox controller or do I need a powered hub??? Also note i was successful thanks to help in this thread using a ide molex to power(5v) the controller and a miner(12v)
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 05, 2014, 12:01:22 AM |
|
I know I read it in one of the gridseed threads somewhere, but I cant seem to find it now. Can anyone tell me what the specific power requirements of a 5 chip Gridseed device is? Thanks.
? The board says 100ma via USB and 12v (IDK amps) via the 2.5mm barrel plug. All the power draws are in the power and freqs section of the OP.
|
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 05, 2014, 12:10:56 AM |
|
ok so i have everything powered up the Wiicontroller has a green led on it and the miner has a green flashing led on it I have one more noob question: How do i find the ip address of my wiicontroller box I used wiibox.net got the ip but when i type it in it the browser just keeps trying to access it but nothing is coming up
Most routers have a DHCP lease table. The MAC address on the unit is printed on the bottom. ok everything is working but the its all in chinese, cant make sense of most of that ip page
I want a screenshot of this Is it possible to plug 1 miner directly into the WIIBox controller or do I need a powered hub???
You need a powered hub to give enough power to the gridseed board (I'm only 99% sure of this) Someone should try it. Also note i was successful thanks to help in this thread using a ide molex to power(5v) the controller and a miner(12v)
I definitely want a picture of these so I can add it to the wiring diagrams I posted above!
|
|
|
|
SummersideGuy
Sr. Member
Offline
Activity: 518
Merit: 250
I am a meat Popsicle
|
|
March 05, 2014, 01:16:48 AM |
|
ok so i have everything powered up the Wiicontroller has a green led on it and the miner has a green flashing led on it I have one more noob question: How do i find the ip address of my wiicontroller box I used wiibox.net got the ip but when i type it in it the browser just keeps trying to access it but nothing is coming up
Most routers have a DHCP lease table. The MAC address on the unit is printed on the bottom. ok everything is working but the its all in chinese, cant make sense of most of that ip page
I want a screenshot of this Is it possible to plug 1 miner directly into the WIIBox controller or do I need a powered hub???
You need a powered hub to give enough power to the gridseed board (I'm only 99% sure of this) Someone should try it. Also note i was successful thanks to help in this thread using a ide molex to power(5v) the controller and a miner(12v)
I definitely want a picture of these so I can add it to the wiring diagrams I posted above! I cannot get the board to detect the miner when I hook it directly up and I cannot find the AC adapter for my hub at the moment, I plug the miner into my pc and it is detected fine. Once I have this thing running I will take some photos of the wired up psu connector and post it here.
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 05, 2014, 01:22:33 AM |
|
I cannot get the board to detect the miner when I hook it directly up and I cannot find the AC adapter for my hub at the moment, I plug the miner into my pc and it is detected fine. Once I have this thing running I will take some photos of the wired up psu connector and post it here.
So that confirms the board is powered by usb while I'm guessing the fan and some part of the mining chips are powered by the power connector. -> which means you will need a powered hub.
|
|
|
|
smtn512
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 05, 2014, 02:04:44 AM |
|
I know I read it in one of the gridseed threads somewhere, but I cant seem to find it now. Can anyone tell me what the specific power requirements of a 5 chip Gridseed device is? Thanks.
? The board says 100ma via USB and 12v (IDK amps) via the 2.5mm barrel plug. All the power draws are in the power and freqs section of the OP. Amps is what I'm trying to find, I think I read somewhere that a power supply for these should have 7 amps available, which sounds really high. Maybe 7 amps is for the whole 3Mh kit, when using dual mode. Thinking I'll just rig up a molex>barrel connector cable so I can plug these into the psu running the rig I plan to add them to. Unless Cablez can get me a cable in the mail real soon, but I'm betting he is pretty swamped at the moment.
|
|
|
|
worldlybedouin
|
|
March 05, 2014, 02:10:04 AM |
|
...Unless Cablez can get me a cable in the mail real soon, but I'm betting he is pretty swamped at the moment...
Yeah he's become super popular overnight because of the cabling problem with these miners.
|
LTC: LXrAe2E6cBsK52GvUsYraeXkc2s7Ti7R5X BTC: 1FLTMqVjTZ5MTdCF4npNZGFMEUGyBV4zcj
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 05, 2014, 02:16:07 AM |
|
...Unless Cablez can get me a cable in the mail real soon, but I'm betting he is pretty swamped at the moment...
Yeah he's become super popular overnight because of the cabling problem with these miners. Cablez does superior work! I didn't really think so many people would read this guide.
|
|
|
|
|