suchmoon
Legendary
 Offline
Activity: 3850
Merit: 9090
https://bpip.org
|
 |
March 07, 2014, 08:47:51 PM |
|
Thank you BotwinBG and miaviator! I was missing libncurses5-dev shown as optional but is required for the text user interface. Using this now to build deps: sudo apt-get install build-essential autoconf automake pkg-config libtool libcurl4-openssl-dev libncurses5-dev libudev-dev Have a few basic Linux questions but perhaps I'll spare this thread with them and try searching. If anyone knows though: 1. how do you go in and out of the cgminer text interface keeping it running in the background? 2. will logging out of the SSH connection shut down cgminer? If so how do you keep it running? 3. how to get back into the cgminer text interface after a new SSH connection? 4. any other tips for a lowly Linux newb? Use screen: "miner" can be anything, it's just a name that you can use later to get back to it. This will give you a new shell. Start cgminer there. Ctrl-A, then Ctrl-D will exit the new shell and will keep cgminer running. To verify that it's indeed running in the background use this: You can now disconnect SSH etc. To get back to your cgminer: |
|
|
|
|
Flep182
Legendary
Offline
Activity: 938
Merit: 1007
|
|
March 07, 2014, 09:19:13 PM |
|
I've got 12 hashing now on 900 frequency on my Raspberry Pi. Looking good, though some hardware errors. I'll probably switch back to 850 before going to sleep tonight. So far looking very fancy, hoping that my second batch clears soon enough (how about monday?  ) from customs so I can set up another 20  |
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3850
Merit: 9090
https://bpip.org
|
|
March 07, 2014, 09:46:51 PM |
|
I've got 12 hashing now on 900 frequency on my Raspberry Pi. Looking good, though some hardware errors. I'll probably switch back to 850 before going to sleep tonight. So far looking very fancy, hoping that my second batch clears soon enough (how about monday? ) from customs so I can set up another 20 I get an occasional hardware error too, 6 errors among 20 miners in the last 24 hours. It seems random (i.e. it's not one faulty miner that always gets the error, it's 6 different miners one error each), and they keep happily hashing afterwards, so I'm not sure if it's something to worry about. I'm at 850 MHz, but I got at least one error at 750 MHz too. Maybe it's the USB hub or power supply or something. I got a couple of errors in Windows too, so it's not an issue with Pi. |
|
|
|
|
|
gamefixer
|
|
March 08, 2014, 12:26:16 AM |
|
Anyone else try the already compiled version of cgminer for windows that can connect to the gridseeds? I was able to get it to connect and mine with one at a time but never anymore than that.
|
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
|
March 08, 2014, 12:43:57 AM |
|
Anyone else try the already compiled version of cgminer for windows that can connect to the gridseeds? I was able to get it to connect and mine with one at a time but never anymore than that.
Had 3 plugged in directly to the computer (no hub) but I could not get more than 2 working so switching to Linux... From the cgminer FAQ: When you first switch a device over to WinUSB with zadig and it shows that
correctly on the left of the zadig window, but it still gives permission
errors, you may need to unplug the USB miner and then plug it back in. Some
users may need to reboot at this point.
I am still waiting for a powered USB hub so that may have something to do with it. |
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 08, 2014, 12:52:02 AM |
|
what's the polarity of the barrel socket on the gridseed? center positive?
|
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 08, 2014, 01:05:01 AM |
|
what's the polarity of the barrel socket on the gridseed? center positive?
Center/Red Wire Positive. 2.1mm ID 5.5mm OD |
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 08, 2014, 01:07:50 AM |
|
what's the polarity of the barrel socket on the gridseed? center positive?
Center/Red Wire Positive. 2.1mm ID 5.5mm OD Yeah stupid me posted before breaking out the meter and seeing that the OD on the unit socket is case grounded...thanks. My plugs dont have color coded wires. |
|
|
|
|
|
wolfey2014
|
|
March 08, 2014, 02:44:27 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ!  Wolfey2014 |
I Modify Miners Professionally! PM me for details!
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 08, 2014, 02:50:36 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. |
|
|
|
|
|
wolfey2014
|
|
March 08, 2014, 02:58:20 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. heh, ofcourse, someone just had to be 'right about it'..  ... as if... |
I Modify Miners Professionally! PM me for details!
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 08, 2014, 03:20:29 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. heh, ofcourse, someone just had to be 'right about it'.. ... as if... I am right  Just trying to make sure I don't fry a $250 piece of electronics the first night I get it. |
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 08, 2014, 03:30:02 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. It's there now. |
|
|
|
|
wolfey2014
|
|
March 08, 2014, 03:30:23 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. heh, ofcourse, someone just had to be 'right about it'.. ... as if... I am right Just trying to make sure I don't fry a $250 piece of electronics the first night I get it. Still tryin to be right eh? Like I said, "READ" |
I Modify Miners Professionally! PM me for details!
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 08, 2014, 03:35:12 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. It's there now. thank you sir |
|
|
|
|
|
wolfey2014
|
|
March 08, 2014, 03:56:13 AM |
|
geesh! come on people! These are basic ' how to' questions already answered right on this very thread! My response to your questions for help is, "see page 1" Capiche? READ! Wolfey2014 the polarity of the socket isn't stated here, just color codes. If you don't have color coded wires (and don't just check it with a meter like I should have to begin with) then it's a legitimate question...there are reverse polarity plugs out there. It's there now. thank you sir heh heh, it worked!     |
I Modify Miners Professionally! PM me for details!
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 08, 2014, 04:36:52 AM |
|
FYI: $232.94 shipped for a gridseed from ZoomHash with Discount Code UnicornHasher (The discount box is on step 2 of 2 after you enter your shipping info)  |
|
|
|
|
vabchgent
|
|
March 08, 2014, 06:05:29 AM |
|
Finally got cgminer to work. I did the plug unplug thing it didn't work. I moved my usb hub to a 2.0 usb port and it started working. |
|
|
|
wsirianni1
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 08, 2014, 01:07:28 PM |
|
hey thanks for the great guide just have a couple of questions
1. why do you need that lightning asic router thingy cant you just use the usb hub alone?
2. where can i get one if i need one?
thanks alot
|
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 08, 2014, 03:14:27 PM |
|
hey thanks for the great guide just have a couple of questions
1. why do you need that lightning asic router thingy cant you just use the usb hub alone?
2. where can i get one if i need one?
thanks alot
You need something to run the mining software, the controller or a windows/linux/pi box. Not sure who sells the controllers by themselves they come with the 10 packs (LA3M) |
|
|
|
|
