TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
January 28, 2019, 11:14:46 AM |
|
Ok, ty. Think I'll will give your miner a try, let's see if you beat CD check hashrate @ pool - not miner Sure, will do that. Sadly can't connect to 2miners.com, the suggested starting parameter in your prepared batch-file doesn't work e:/ will try a bit. Send you a DM - I'm sure we can get that fixed.
|
|
|
|
Badoggy
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 29, 2019, 04:17:39 AM |
|
Hello,
First off thanks for the release! I've been running five rigs with TTMiner on Mintpond for ZCoin, XZC (mtp). Three rigs have been working and running with no problems while two of the rigs randomly stop mining after 24-36 hours. Currently one 70-80% power and 0 on core and memory. They stay on wasting electricity but not mining and give me this error:
*********** GPU[0] Increment Nonce2 *********** GPU[1] Increment Nonce2 *********** GPU[2] Increment Nonce2 *********** GPU[3] Increment Nonce2 .... etc ....
One of the 6 card and one of the 8 card rigs is giving me this error. I've looked around on Google but couldn't find anything on a fix. Any idea?
Another thing is what do y'all set the virtual memory to? I've tried 32000 and 64000. 64000 works best for me but I noticed that when I change the virtual memory I lose a ton of space on my hard drive to where I barley have any room to download and can't update anything. Is this normal or what can be the fix for this? I'm running 1080s and 1070s (one separate rigs) all with 8gb, 8gb ram stick, and a 120 gb hard drive.
Thanks!
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
January 29, 2019, 04:51:34 AM |
|
Hello,
First off thanks for the release! I've been running five rigs with TTMiner on Mintpond for ZCoin, XZC (mtp). Three rigs have been working and running with no problems while two of the rigs randomly stop mining after 24-36 hours. Currently one 70-80% power and 0 on core and memory. They stay on wasting electricity but not mining and give me this error:
*********** GPU[0] Increment Nonce2 *********** GPU[1] Increment Nonce2 *********** GPU[2] Increment Nonce2 *********** GPU[3] Increment Nonce2 .... etc ....
One of the 6 card and one of the 8 card rigs is giving me this error. I've looked around on Google but couldn't find anything on a fix. Any idea?
Another thing is what do y'all set the virtual memory to? I've tried 32000 and 64000. 64000 works best for me but I noticed that when I change the virtual memory I lose a ton of space on my hard drive to where I barley have any room to download and can't update anything. Is this normal or what can be the fix for this? I'm running 1080s and 1070s (one separate rigs) all with 8gb, 8gb ram stick, and a 120 gb hard drive.
Thanks!
Hi Badoggy, I will PM you a link with the new beta for 2.1.8 later today. Let's see if the problem still exits. My guess is that TT-Miner continues to find POW and did not receive any new job - maybe a connection issue? Can you check if the connection to the pool is active from that rig? Can you run the miner with the '-logpool' option? This will create a logfile with the communication to the pool and it might contain useful information if there are issues with the connectivity. The driver needs memory for each interface - about 4.5 GB for MTP. Also you might need somewhat for your system. As a rule of thumb you can calculate for a 6 GPU system - for MTP: 6 * 4.5GB = 27GB + 4GB for system = 31GB. So you should be fine with 32GB virtual memory on a 6 GPU rig.
|
|
|
|
xarix
Newbie
Offline
Activity: 88
Merit: 0
|
|
January 30, 2019, 03:31:16 PM |
|
Miner states ''MTP unknown algo'' when trying to mine Zcoin. Can you please help me?
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
January 30, 2019, 05:23:29 PM |
|
Miner states ''MTP unknown algo'' when trying to mine Zcoin. Can you please help me?
Hi, please make sure that you extract all files & folders from the zip file. Sounds like you do not extract the algo folder. Please let me know if that works or if you still have the problem. Thanks.
|
|
|
|
xarix
Newbie
Offline
Activity: 88
Merit: 0
|
|
January 30, 2019, 08:32:59 PM |
|
Miner states ''MTP unknown algo'' when trying to mine Zcoin. Can you please help me?
Hi, please make sure that you extract all files & folders from the zip file. Sounds like you do not extract the algo folder. Please let me know if that works or if you still have the problem. Thanks. Downloaded the miner again but still there is no MTP.dll file in the algo folder mate, please have a look at it. Thanks for the quick response nonetheless.
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
January 30, 2019, 08:58:53 PM |
|
Miner states ''MTP unknown algo'' when trying to mine Zcoin. Can you please help me?
Hi, please make sure that you extract all files & folders from the zip file. Sounds like you do not extract the algo folder. Please let me know if that works or if you still have the problem. Thanks. Downloaded the miner again but still there is no MTP.dll file in the algo folder mate, please have a look at it. Thanks for the quick response nonetheless. Hi, send you a PM with the link to the latest beta.
|
|
|
|
joseph32
Member
Offline
Activity: 415
Merit: 21
|
|
January 30, 2019, 08:59:26 PM |
|
Miner states ''MTP unknown algo'' when trying to mine Zcoin. Can you please help me?
Hi, please make sure that you extract all files & folders from the zip file. Sounds like you do not extract the algo folder. Please let me know if that works or if you still have the problem. Thanks. Downloaded the miner again but still there is no MTP.dll file in the algo folder mate, please have a look at it. Thanks for the quick response nonetheless. AlgoMTP and AlgoMTP-C92 are both included in the archive. Deactivate or lower your security, I bet it will auto-deleted.
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
January 30, 2019, 09:14:04 PM |
|
Miner states ''MTP unknown algo'' when trying to mine Zcoin. Can you please help me?
Hi, please make sure that you extract all files & folders from the zip file. Sounds like you do not extract the algo folder. Please let me know if that works or if you still have the problem. Thanks. Downloaded the miner again but still there is no MTP.dll file in the algo folder mate, please have a look at it. Thanks for the quick response nonetheless. AlgoMTP and AlgoMTP-C92 are both included in the archive. Deactivate or lower your security, I bet it will auto-deleted. That might be the case - but until now TT was never suspected as virus: https://www.virustotal.com/#/url/f80ff82eb6654f4f038ac5a7d8a3678a11b6af73086484fb2a9c9daef4a7edf8/detectionI will report if I have more information about this issue.
|
|
|
|
Badoggy
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 30, 2019, 11:28:08 PM |
|
Hello,
First off thanks for the release! I've been running five rigs with TTMiner on Mintpond for ZCoin, XZC (mtp). Three rigs have been working and running with no problems while two of the rigs randomly stop mining after 24-36 hours. Currently one 70-80% power and 0 on core and memory. They stay on wasting electricity but not mining and give me this error:
*********** GPU[0] Increment Nonce2 *********** GPU[1] Increment Nonce2 *********** GPU[2] Increment Nonce2 *********** GPU[3] Increment Nonce2 .... etc ....
One of the 6 card and one of the 8 card rigs is giving me this error. I've looked around on Google but couldn't find anything on a fix. Any idea?
Another thing is what do y'all set the virtual memory to? I've tried 32000 and 64000. 64000 works best for me but I noticed that when I change the virtual memory I lose a ton of space on my hard drive to where I barley have any room to download and can't update anything. Is this normal or what can be the fix for this? I'm running 1080s and 1070s (one separate rigs) all with 8gb, 8gb ram stick, and a 120 gb hard drive.
Thanks!
Hi Badoggy, I will PM you a link with the new beta for 2.1.8 later today. Let's see if the problem still exits. My guess is that TT-Miner continues to find POW and did not receive any new job - maybe a connection issue? Can you check if the connection to the pool is active from that rig? Can you run the miner with the '-logpool' option? This will create a logfile with the communication to the pool and it might contain useful information if there are issues with the connectivity. The driver needs memory for each interface - about 4.5 GB for MTP. Also you might need somewhat for your system. As a rule of thumb you can calculate for a 6 GPU system - for MTP: 6 * 4.5GB = 27GB + 4GB for system = 31GB. So you should be fine with 32GB virtual memory on a 6 GPU rig. I never received a PM with the newer version to test out. I also found out the "Increment Nonce2" error is only happening on the 8 card rig. The 6 card rig is now going blue screen after mining for 15-30 minutes then restarts and does it all over again, as well as sometimes going full black screen so I have to hold the power button to turn off and turn back on the rig. Running "TT-Miner-MTP-CUDA100" not the "TT-Miner" - 6 1080s, cuda 10, 70% power, 0 core, 0 memory, 70% fan speed, with a 1200w psu, 32000 on virtual memory. Any idea why it would be crashing? Also what do you recommend on virus protection regarding mining? Does Real Time Protection need disabled? I added both "TT-Miner-MTP-CUDA100" and "TT-Miner" to the exclusions even though I'm not running "TT-Miner" I just added -logpool so I'll let you know what it says, do you want me to post that here or a PM?
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
January 31, 2019, 02:34:47 AM Last edit: January 31, 2019, 02:51:53 AM by TrailingStop |
|
Hello,
First off thanks for the release! I've been running five rigs with TTMiner on Mintpond for ZCoin, XZC (mtp). Three rigs have been working and running with no problems while two of the rigs randomly stop mining after 24-36 hours. Currently one 70-80% power and 0 on core and memory. They stay on wasting electricity but not mining and give me this error:
*********** GPU[0] Increment Nonce2 *********** GPU[1] Increment Nonce2 *********** GPU[2] Increment Nonce2 *********** GPU[3] Increment Nonce2 .... etc ....
One of the 6 card and one of the 8 card rigs is giving me this error. I've looked around on Google but couldn't find anything on a fix. Any idea?
Another thing is what do y'all set the virtual memory to? I've tried 32000 and 64000. 64000 works best for me but I noticed that when I change the virtual memory I lose a ton of space on my hard drive to where I barley have any room to download and can't update anything. Is this normal or what can be the fix for this? I'm running 1080s and 1070s (one separate rigs) all with 8gb, 8gb ram stick, and a 120 gb hard drive.
Thanks!
Hi Badoggy, I will PM you a link with the new beta for 2.1.8 later today. Let's see if the problem still exits. My guess is that TT-Miner continues to find POW and did not receive any new job - maybe a connection issue? Can you check if the connection to the pool is active from that rig? Can you run the miner with the '-logpool' option? This will create a logfile with the communication to the pool and it might contain useful information if there are issues with the connectivity. The driver needs memory for each interface - about 4.5 GB for MTP. Also you might need somewhat for your system. As a rule of thumb you can calculate for a 6 GPU system - for MTP: 6 * 4.5GB = 27GB + 4GB for system = 31GB. So you should be fine with 32GB virtual memory on a 6 GPU rig. I never received a PM with the newer version to test out. I also found out the "Increment Nonce2" error is only happening on the 8 card rig. The 6 card rig is now going blue screen after mining for 15-30 minutes then restarts and does it all over again, as well as sometimes going full black screen so I have to hold the power button to turn off and turn back on the rig. Running "TT-Miner-MTP-CUDA100" not the "TT-Miner" - 6 1080s, cuda 10, 70% power, 0 core, 0 memory, 70% fan speed, with a 1200w psu, 32000 on virtual memory. Any idea why it would be crashing? Also what do you recommend on virus protection regarding mining? Does Real Time Protection need disabled? I added both "TT-Miner-MTP-CUDA100" and "TT-Miner" to the exclusions even though I'm not running "TT-Miner" I just added -logpool so I'll let you know what it says, do you want me to post that here or a PM? Hi - must have missed that - mail sent. Sorry. I recommend as much protection as possible. As far as I know today - an no one reported other - TT doesn't need any exception on any protection application. I cannot speak for other miners - if they requires exceptions it is up to them to recommend what you should do. Thanks.
|
|
|
|
|
rainbowminer
Jr. Member
Offline
Activity: 95
Merit: 2
|
|
February 03, 2019, 06:54:46 PM |
|
Looks like your API in TradeTec-MinerCmd.exe is broken in v2.1.8. Or has it changed?
|
RainbowMiner developer https://rbminer.net https://bitcointalk.org/index.php?topic=5050211.0
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 03, 2019, 07:08:21 PM |
|
Looks like your API in TradeTec-MinerCmd.exe is broken in v2.1.8. Or has it changed?
No- API should be unchanged. It is TT-Miner.exe - TradeTec-MinerCmd.exe is the old executable!
|
|
|
|
rainbowminer
Jr. Member
Offline
Activity: 95
Merit: 2
|
|
February 03, 2019, 07:14:05 PM |
|
Oh, I see! Then please check the download link in the first post of this thread. It is linked to the old miner.
|
RainbowMiner developer https://rbminer.net https://bitcointalk.org/index.php?topic=5050211.0
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 03, 2019, 07:38:57 PM |
|
Oh, I see! Then please check the download link in the first post of this thread. It is linked to the old miner.
Yes, you clicked the link of the old GUI miner - I removed that section now so that this cannot happened again. Please check if the link of OK now. Thanks
|
|
|
|
ggarbi
Jr. Member
Offline
Activity: 43
Merit: 1
|
|
February 05, 2019, 05:23:51 AM |
|
Whats news on 2.1.8 version guys ?
|
|
|
|
|
TrailingStop (OP)
Member
Offline
Activity: 566
Merit: 16
|
|
February 08, 2019, 08:55:54 PM |
|
New release 2.1.9 is available: - new algo Myriad-Groestl (Myriad, DigiByte, Verge, etc) - fixes a 'duplicate share' bug on very fast systems - add new command line options (-PRT & -PRS) to control performance information output on the screen - add core & mem clock information to the performance report Sample for the new options: -PRT INT Performance-Report & information after INT multiple of 15 seconds Set INT to 0 to disable output after a fixed timeframe sample -RPT 24 shows the performance report after 24 * 5 sec = 2 minutes Default: -PRT 3 -PRS INT Performance-Report & information after a INT shares found Set INT to 0 to disable output after a fixed number of shares sample -RPS 10 shows the performance report after 10 shares were found Default: -PRS 0 Mixed sample: - You want to see the performance report all 25 shares and all 30 secs: -PRS 25 -PRT 6 - You do not want to see any performance report: -PRT 0 Download-link: https://TradeProject.de/download/Miner/TT-Miner.zipLet me know if you run into any issues. Happy mining!
|
|
|
|
GoRdiE
Newbie
Offline
Activity: 162
Merit: 0
|
|
February 09, 2019, 02:47:02 AM |
|
New release 2.1.9 is available: - new algo Myriad-Groestl (Myriad, DigiByte, Verge, etc) - fixes a 'duplicate share' bug on very fast systems - add new command line options (-PRT & -PRS) to control performance information output on the screen - add core & mem clock information to the performance report Sample for the new options: -PRT INT Performance-Report & information after INT multiple of 15 seconds Set INT to 0 to disable output after a fixed timeframe sample -RPT 24 shows the performance report after 24 * 5 sec = 2 minutes Default: -PRT 3 -PRS INT Performance-Report & information after a INT shares found Set INT to 0 to disable output after a fixed number of shares sample -RPS 10 shows the performance report after 10 shares were found Default: -PRS 0 Mixed sample: - You want to see the performance report all 25 shares and all 30 secs: -PRS 25 -PRT 6 - You do not want to see any performance report: -PRT 0 Download-link: https://TradeProject.de/download/Miner/TT-Miner.zipLet me know if you run into any issues. Happy mining! Hi TT, Lyra2v3 don´t work. Maybe some libraries missing?
|
|
|
|
|