TT-Miner 2024.1.2 BLAKE3, KAWPOW, ETHASH, ETCHASH, EPIC, SHA512256D, SHA3D, ETI

[TrailingStop]

Hi,

version 3.0.0 release.

This is the first release of TT-Miner for Windows & Linux. They are based on the same source-code (as far as possible) and may show the same bugs. Anyway I tried to get this release as clean as possible.

- first linux & windows release
- bug fixes (high number of GPUs 8 and more)
- support for Abassian
- support of BeePool
- new command line option: -compute INT to define a certain compute version for you GPU (required if you run RTX interfaces with older cuda)
- new command line option: -notimestamp for output on screen
- new default for 'crashdumps' is now: nocrashdump. Do enable crashdump creation add -ccd

If you want to run TT-Miner under HiveOS please make sure to give TT access to the cuda folder first with:
LD_LIBRARY_PATH=/hive/lib

Please let me know if you run into issues or see any other problem.

Thanks and: Happy Mining

[TrailingStop]

All good with beta 5.
Just... Beepool is 3% less fee for SERO, I think it's worth working out a solution for them.

Hi,

I added BeePool for you in the release - should work.

Let me know if you have issues.

Thanks.

[topteam]

Hi,

version 3.0.0 release.

This is the first release of TT-Miner for Windows & Linux. They are based on the same source-code (as far as possible) and may show the same bugs. Anyway I tried to get this release as clean as possible.

- first linux & windows release
- bug fixes (high number of GPUs 8 and more)
- support for Abassian
- support of BeePool
- new command line option: -compute INT to define a certain compute version for you GPU (required if you run RTX interfaces with older cuda)
- new command line option: -notimestamp for output on screen
- new default for 'crashdumps' is now: nocrashdump. Do enable crashdump creation add -ccd

If you want to run TT-Miner under HiveOS please make sure to give TT access to the cuda folder first with:
LD_LIBRARY_PATH=/hive/lib

Please let me know if you run into issues or see any other problem.

Thanks and: Happy Mining

Thanks!!!
Please swap versions in readme 

Code:

Please note these requirements for the different cuda toolkit releases:
Cuda-Toolkit		Windows		Linux
CUDA 10.1.105		>= 418.39	>= 418.96
CUDA 10.0.130		>= 410.48	>= 411.31
CUDA 9.2.148		>= 396.37	>= 398.26

[TrailingStop]

Hi,

version 3.0.0 release.

This is the first release of TT-Miner for Windows & Linux. They are based on the same source-code (as far as possible) and may show the same bugs. Anyway I tried to get this release as clean as possible.

- first linux & windows release
- bug fixes (high number of GPUs 8 and more)
- support for Abassian
- support of BeePool
- new command line option: -compute INT to define a certain compute version for you GPU (required if you run RTX interfaces with older cuda)
- new command line option: -notimestamp for output on screen
- new default for 'crashdumps' is now: nocrashdump. Do enable crashdump creation add -ccd

If you want to run TT-Miner under HiveOS please make sure to give TT access to the cuda folder first with:
LD_LIBRARY_PATH=/hive/lib

Please let me know if you run into issues or see any other problem.

Thanks and: Happy Mining

Thanks!!!
Please swap versions in readme 

Code:

Please note these requirements for the different cuda toolkit releases:
Cuda-Toolkit		Windows		Linux
CUDA 10.1.105		>= 418.39	>= 418.96
CUDA 10.0.130		>= 410.48	>= 411.31
CUDA 9.2.148		>= 396.37	>= 398.26

Good catch - thanks. Fixed for the next release.

[nx5]

whats command for update cuda driver  linux?  
any rigs on HIVEos have mistake cuda!!
about  HYDNORA (HORA ) COIN!

[TrailingStop]

whats command for update cuda driver  linux?  
any rigs on HIVEos have mistake cuda!!
about  HYDNORA (HORA ) COIN!

not sure about your installation. just try you config with:
-A PROGPOW092-92

[TrailingStop]

whats command for update cuda driver  linux?  
any rigs on HIVEos have mistake cuda!!
about  HYDNORA (HORA ) COIN!

not sure about your installation. just try you config with:
-A PROGPOW092-92      - cuda 9.2
-A PROGPOW092-100    - cuda 10.0
-A PROGPOW092-101    - cuda 10.1

It may be that the next release of HiveOS contains the TT miner - so it could be worth to wait?

[TrailingStop]

Version 3.0.1 released.

Fix for Hashrate reporting.

[HaloGenius]

TT-Miner integrated into Hive OS since v0.6-60@190805
Happy mining with HiveOS power!

[TimothyR]

Hello. I see the small problem with API

I run miner like this:
./TT-Miner -a mtp-92 -o zcoin-asia.mintpond.com:3000 -u xxxxx -p x --api-bind
./TT-Miner -a mtp-100 -o zcoin-asia.mintpond.com:3000 -u xxxxx -p x --api-bind
version 3.0.1 with cuda libs 9.2 and 10.0

and trying to get the stats from API - very often I got empty result like below:

Code:

root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
{"id":0,"jsonrpc":"2.0","result":["TT-Miner/3.0.1","3","8672250;16;1","1468096;1478582;1436636;1436636;1426150;1426150","0;0;0","off;off;off;off;off;off","63;48;64;66;65;52;65;58;65;51;65;59","zcoin-asia.mintpond.com:3000","0;0;0;0","99;99;100;99;99;99"]}
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
{"id":0,"jsonrpc":"2.0","result":["TT-Miner/3.0.1","3","8672250;16;1","1468096;1478582;1436636;1436636;1426150;1426150","0;0;0","off;off;off;off;off;off","63;48;64;66;65;52;65;58;65;51;65;59","zcoin-asia.mintpond.com:3000","0;0;0;0","99;99;100;99;99;99"]}
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
{"id":0,"jsonrpc":"2.0","result":["TT-Miner/3.0.1","3","8672250;16;1","1468096;1478582;1436636;1436636;1426150;1426150","0;0;0","off;off;off;off;off;off","63;48;64;66;65;52;65;58;65;51;65;59","zcoin-asia.mintpond.com:3000","0;0;0;0","99;99;100;99;99;99"]}

please help

[TrailingStop]

Hello. I see the small problem with API

I run miner like this:
./TT-Miner -a mtp-92 -o zcoin-asia.mintpond.com:3000 -u xxxxx -p x --api-bind
./TT-Miner -a mtp-100 -o zcoin-asia.mintpond.com:3000 -u xxxxx -p x --api-bind
version 3.0.1 with cuda libs 9.2 and 10.0

and trying to get the stats from API - very often I got empty result like below:

Code:

root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
{"id":0,"jsonrpc":"2.0","result":["TT-Miner/3.0.1","3","8672250;16;1","1468096;1478582;1436636;1436636;1426150;1426150","0;0;0","off;off;off;off;off;off","63;48;64;66;65;52;65;58;65;51;65;59","zcoin-asia.mintpond.com:3000","0;0;0;0","99;99;100;99;99;99"]}
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
{"id":0,"jsonrpc":"2.0","result":["TT-Miner/3.0.1","3","8672250;16;1","1468096;1478582;1436636;1436636;1426150;1426150","0;0;0","off;off;off;off;off;off","63;48;64;66;65;52;65;58;65;51;65;59","zcoin-asia.mintpond.com:3000","0;0;0;0","99;99;100;99;99;99"]}
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
root@simpleminer:/home/miner# echo '{"method": "miner_getstat1"}' | nc 127.0.0.1 4068
{"id":0,"jsonrpc":"2.0","result":["TT-Miner/3.0.1","3","8672250;16;1","1468096;1478582;1436636;1436636;1426150;1426150","0;0;0","off;off;off;off;off;off","63;48;64;66;65;52;65;58;65;51;65;59","zcoin-asia.mintpond.com:3000","0;0;0;0","99;99;100;99;99;99"]}

please help

Hi,

thanks you very much for the detailed report. I check this and will release a fix as soon as I can.

[TimothyR]

Hello again, I have second problem

Ubuntu 16.04
tt-miner version with cuda 10.0 libraries
ETHASH, MTP and UBQ mining work fine, but progpow problem with segfault ;-/

LD_LIBRARY_PATH=$LD_LIBRARY_PATH:./; export LD_LIBRARY_PATH;
./TT-Miner -a PROGPOW-100 -o bci.suprnova.cc:9166 -u iD8HieGcYh4dcnbYy3U9FZsPfiaSu4nrty -p x

Code:

****************** Mining-Pool information
ID:00 - Primary pool:  bci.suprnova.cc:9166 - Set Stratum communication to default: Stratum
             -Wallet:  iD8HieGcYh4dcnbYy3U9FZsPfiaSu4nrty
             -Worker:

No backup pool defined

****************** Algo information
Algo/Cuda detection:   User defined / command line
Algo/Cuda loaded:      ProgPoW (Programmatic Proof-of-Work) (CUDA 10.0)

****************** Apply settings
Selected coin to mine:         default
Set process priority:          default
Avg. performance timeframe:    2 minutes
Performance summary(sec.):     15 seconds
Performance summary(shares):   disabled
Report Hashrate to pool:       disabled
Drop stalled shares:           disabled
Temp control:                  disabled
API-Interface:                 disabled
Use intensity (-1 default):     -1  -1  -1  -1  -1  -1
Use gridsize (-1 default):      -1  -1  -1  -1  -1  -1
Use compute-ver. (-1 default):  -1  -1  -1  -1  -1  -1

****************** Start mining
16:01:14 Pool[0]: Connecting to bci.suprnova.cc:9166 - PoolID: 0
16:01:14 Pool[0]: Connected to: bci.suprnova.cc:9166 - IP4/6: 54.37.81.148
16:01:14 Pool[0]: Protocol: Stratum
16:01:14 Pool[0]: Subscribed to bci.suprnova.cc:9166
16:01:14 Pool[0]: difficulty changed from 0.000 H to 33.554 MH
Segmentation fault

My friend on other distro (5.1.16-arch1-1-ARCH) just run (same prepared package by me, and same command line parameters, and same cuda 10.0 libraries included) and mining without any errors.

[TrailingStop]

Hello again, I have second problem

Ubuntu 16.04
tt-miner version with cuda 10.0 libraries
ETHASH, MTP and UBQ mining work fine, but progpow problem with segfault ;-/

LD_LIBRARY_PATH=$LD_LIBRARY_PATH:./; export LD_LIBRARY_PATH;
./TT-Miner -a PROGPOW-100 -o bci.suprnova.cc:9166 -u iD8HieGcYh4dcnbYy3U9FZsPfiaSu4nrty -p x

Code:

****************** Mining-Pool information
ID:00 - Primary pool:  bci.suprnova.cc:9166 - Set Stratum communication to default: Stratum
             -Wallet:  iD8HieGcYh4dcnbYy3U9FZsPfiaSu4nrty
             -Worker:

No backup pool defined

****************** Algo information
Algo/Cuda detection:   User defined / command line
Algo/Cuda loaded:      ProgPoW (Programmatic Proof-of-Work) (CUDA 10.0)

****************** Apply settings
Selected coin to mine:         default
Set process priority:          default
Avg. performance timeframe:    2 minutes
Performance summary(sec.):     15 seconds
Performance summary(shares):   disabled
Report Hashrate to pool:       disabled
Drop stalled shares:           disabled
Temp control:                  disabled
API-Interface:                 disabled
Use intensity (-1 default):     -1  -1  -1  -1  -1  -1
Use gridsize (-1 default):      -1  -1  -1  -1  -1  -1
Use compute-ver. (-1 default):  -1  -1  -1  -1  -1  -1

****************** Start mining
16:01:14 Pool[0]: Connecting to bci.suprnova.cc:9166 - PoolID: 0
16:01:14 Pool[0]: Connected to: bci.suprnova.cc:9166 - IP4/6: 54.37.81.148
16:01:14 Pool[0]: Protocol: Stratum
16:01:14 Pool[0]: Subscribed to bci.suprnova.cc:9166
16:01:14 Pool[0]: difficulty changed from 0.000 H to 33.554 MH
Segmentation fault

My friend on other distro (5.1.16-arch1-1-ARCH) just run (same prepared package by me, and same command line parameters, and same cuda 10.0 libraries included) and mining without any errors.

That is not easy. I will first look into the hashrate reporting problem - then I will check the distribution bug. Can you tell me more about 5.1.16-arch1-1-ARCH? Is this also ubuntu based?

[laik2]

Its arch based, not ubuntu, but libs should be backwards compatible unless libc mismatches.

[TimothyR]

about this arch distro - dump from friend:
...same GPUs

Code:

 ✘ user@desctop# uname -r
5.1.16-arch1-1-ARCH
 user@desctop# nvidia-smi 
Wed Aug  7 21:04:18 2019       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 430.26       Driver Version: 430.26       CUDA Version: 10.2     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:0B:00.0  On |                  N/A |
|  0%   52C    P0    34W / 166W |   2569MiB /  8116MiB |     12%      Default |
+-------------------------------+----------------------+----------------------+

and same debug command from my ubuntu system (that under progpow has segfault)

Code:

miner@simpleminer:~$ uname -r
4.17.19-smos17
miner@simpleminer:~$ nvidia-smi
Thu Aug  8 07:59:27 2019
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 430.40       Driver Version: 430.40       CUDA Version: 10.1     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    On   | 00000000:01:00.0 Off |                  N/A |
| 33%   65C    P2    99W / 100W |   3405MiB /  8119MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    On   | 00000000:03:00.0 Off |                  N/A |
| 41%   65C    P2    99W / 100W |   3405MiB /  8119MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    On   | 00000000:06:00.0 Off |                  N/A |
| 36%   65C    P2   100W / 100W |   3405MiB /  8119MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    On   | 00000000:07:00.0 Off |                  N/A |
| 40%   64C    P2   100W / 100W |   3405MiB /  8119MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    On   | 00000000:08:00.0 Off |                  N/A |
| 36%   64C    P2   100W / 100W |   3405MiB /  8119MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    On   | 00000000:09:00.0 Off |                  N/A |
| 35%   65C    P2    99W / 100W |   3405MiB /  8119MiB |    100%      Default |
+-------------------------------+----------------------+----------------------+

[TimothyR]

I now see that forgot to paste one important thing, that I found in dmesg and that may help:

Code:

[   42.764276] traps: TT-Miner[14099] general protection fault ip:7f1ab0c20cd9 sp:7f1aa622d0a8 error:0 in libc-2.23.so[7f1ab0aba000+1c0000]

This is only thing, that I found for now.
Also tested on few other machines with different GPUs (P104-100 4GB), and on kernel 5.1.11 - and same error

[TimothyR]

I have do some "magic trick" with...upgrading Ubuntu 16 (libc6-2.23) to 18 (with libc6-2.27) and...
....progpow started to work.

there are maaaany rigs with ubuntu 16, that I cant "just like that" upgrade. Could You compile miner under ubuntu16 (with older libc6? - maybe this is problem?) or give us source code of miner?

[TrailingStop]

I have do some "magic trick" with...upgrading Ubuntu 16 (libc6-2.23) to 18 (with libc6-2.27) and...
....progpow started to work.

there are maaaany rigs with ubuntu 16, that I cant "just like that" upgrade. Could You compile miner under ubuntu16 (with older libc6? - maybe this is problem?) or give us source code of miner?

Thanks a lo - I will recompile for 16

Thanks!

[hydnoracoin]

whats command for update cuda driver  linux?  
any rigs on HIVEos have mistake cuda!!
about  HYDNORA (HORA ) COIN!

not sure about your installation. just try you config with:
-A PROGPOW092-92      - cuda 9.2
-A PROGPOW092-100    - cuda 10.0
-A PROGPOW092-101    - cuda 10.1

It may be that the next release of HiveOS contains the TT miner - so it could be worth to wait?

official add tt-miner on the HIVEOS after version 0.6-60@190805   HORA??
for windows:
:start
TIMEOUT 10
TT-Miner -A PROGPOW092 -luck -coin hora -P stratum1+tcp://YOUR_WALLET.YOUR_WORKER@pool.hydnora.org:8008
goto start

for linux? or for HIVEos ?

[CreamyG31337]

any idea why it's crashing on MTP for the last few versions? I have to use cryptodredge now for it.

Code:

Initialize diagnostics (20)
Starting Diagnostics (30s). Awesome Miner Remote Agent version: 6.8.3
OS: Microsoft Windows 10 Pro 64-bit
nVidia driver version: 431.60
nVidia OpenCL Platform ID: 0
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: TtMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: 
Properties: (WindowMode: ConsoleFormat, EngineType: TtMiner, IsProfitMiner: True)
====================================================================================================
C:\Users\Miner\AppData\Roaming\AwesomeMinerService\tt-miner-3.0.1_1\TT-Miner.exe  -A MTP -P stratum+tcp://xxxx.nVidiaRig:xxx,verbose,sd=650@zcoin.mintpond.com:3000 --api-bind 127.0.0.1:4028
====================================================================================================
Mining Engine Process started, PID: 7320
> TT-Miner - Version: 3.0.1 (Aug  6 2019 08:19:01)
> 

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed