Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[sattar2002]

hi guys
my miner worked whit Version 20180930
but tody it just stop working and said miner may not bot
i want to know is it becuse the version is to old or what?

I had the same problem, after updating firmware with the last version 1116 working ok.

where can i found this version

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

thank you my friend but its stil the same
the miner may not bot

[1714846579]

1714846579

[1714846579]

1714846579

[1714846579]

1714846579

[Blockmunch]

Anyone has a better profit other than nicehash ? I tried big pools , lots of coins but never reached nicehash. Pools has a lot of rejects. Please suggest me a pool

I suggest guys who have damn zig z1 or zig z1+ to connect to Blockmasters pool.
I compared many days my earning with blockmasters and  nicehash.
Nowadays the earning has realy decreased in nicehash and other pools. So I desided to change the pool and test different ones.
I got the best result in blockmastes. You can also check in pool mining calculator sites.
In blockmastets I tried European server:

stratum+tcp://eu.blockmasters.co:4533
Yor wallet address as USER NAME
C=BTC  as pass

You can also check the earning of different pools here:
https://minerstat.com/mining-calculator
 

I hope I could help guys

I have 30%-40% reject hash permanently with Blockmasters. Do you have the same?

Yes I Have the same percent rejected Hash in the pool. but in z1 dashboard it is 2.44% rejects.
pool rejects is more important.

We are seeing the same rejects for all of these miners on our site.  Looking into the forum it looks like this is a common occurance with these miners.  Keep in mind the rejects are the miner passing bad data to the pool stratum.  Keep in mind the hashrate reported on the site is the hash the site is accepting.  The rejects are jobs that were not accepted, and that hash is already subtracted from the hashrate on the site.  So if you are seeing 6GH on the site with 35% rejects, the site is ACCEPTING 6GH from the miner. 

Let us know if there is anything we can do!

[moosavi]

Anyone has a better profit other than nicehash ? I tried big pools , lots of coins but never reached nicehash. Pools has a lot of rejects. Please suggest me a pool

I suggest guys who have damn zig z1 or zig z1+ to connect to Blockmasters pool.
I compared many days my earning with blockmasters and  nicehash.
Nowadays the earning has realy decreased in nicehash and other pools. So I desided to change the pool and test different ones.
I got the best result in blockmastes. You can also check in pool mining calculator sites.
In blockmastets I tried European server:

stratum+tcp://eu.blockmasters.co:4533
Yor wallet address as USER NAME
C=BTC  as pass

You can also check the earning of different pools here:
https://minerstat.com/mining-calculator
 

I hope I could help guys

I have 30%-40% reject hash permanently with Blockmasters. Do you have the same?

Yes I Have the same percent rejected Hash in the pool. but in z1 dashboard it is 2.44% rejects.
pool rejects is more important.

We are seeing the same rejects for all of these miners on our site.  Looking into the forum it looks like this is a common occurance with these miners.  Keep in mind the rejects are the miner passing bad data to the pool stratum.  Keep in mind the hashrate reported on the site is the hash the site is accepting.  The rejects are jobs that were not accepted, and that hash is already subtracted from the hashrate on the site.  So if you are seeing 6GH on the site with 35% rejects, the site is ACCEPTING 6GH from the miner. 

Let us know if there is anything we can do!

Thank you for your information

[lennujuht]

hi guys
my miner worked whit Version 20180930
but tody it just stop working and said miner may not bot
i want to know is it becuse the version is to old or what?

I had the same problem, after updating firmware with the last version 1116 working ok.

where can i found this version

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

thank you my friend but its stil the same
the miner may not bot

1-Try another USB flash drive, but use USB 3.0
2-after installing new firmware disable FAN control
3- safe setting and restart miner

[citronick]

hi guys
my miner worked whit Version 20180930
but tody it just stop working and said miner may not bot
i want to know is it becuse the version is to old or what?

I had the same problem, after updating firmware with the last version 1116 working ok.

where can i found this version

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

thank you my friend but its stil the same
the miner may not bot

1-Try another USB flash drive, but use USB 3.0
2-after installing new firmware disable FAN control
3- safe setting and restart miner

Why disable fan control?

[lennujuht]

hi guys
my miner worked whit Version 20180930
but tody it just stop working and said miner may not bot
i want to know is it becuse the version is to old or what?

I had the same problem, after updating firmware with the last version 1116 working ok.

where can i found this version

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

thank you my friend but its stil the same
the miner may not bot

some Zig users had problems with the FAN. just try, you can set it able back at any time.

1-Try another USB flash drive, but use USB 3.0
2-after installing new firmware disable FAN control
3- safe setting and restart miner

Why disable fan control?

[lennujuht]

hi guys
my miner worked whit Version 20180930
but tody it just stop working and said miner may not bot
i want to know is it becuse the version is to old or what?

I had the same problem, after updating firmware with the last version 1116 working ok.

where can i found this version

https://drive.google.com/drive/folders/1jklZzNDkBKDxHUQKd5V9kKiu_QWlcUug

thank you my friend but its stil the same
the miner may not bot

some Zig users had problems with the FAN. just try, you can set it able back at any time.

1-Try another USB flash drive, but use USB 3.0
2-after installing new firmware disable FAN control
3- safe setting and restart miner

Why disable fan control?

some users had a problem with the FAN. You can try and set it back able at any time.

[Andartis]

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

[Yezzzuurrr]

wich pool, xnsub on?

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

[Andartis]

wich pool, xnsub on?

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

Latest fw 1116, nicehash. xnsub on.

[Yezzzuurrr]

remove xnsub.. in my case that removed the rejects

wich pool, xnsub on?

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

Latest fw 1116, nicehash. xnsub on.

[lennujuht]

remove xnsub.. in my case that removed the rejects

wich pool, xnsub on?

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

Latest fw 1116, nicehash. xnsub on.

Hi, with blockmasters i do not have xnub (stratum+tcp://eu.blockmasters.co:4533) but a lot of rejections.

 should I add xsnub to get               (stratum+tcp://eu.blockmasters.co:4533#xsnub)

[citronick]

Anybody done the following?

Any feedback?

Z1 miner

Latest FW 1116

Modified miner.json file

from

"auto_frequent":"0","frequency":"900","

to

"auto_frequent":"1","frequency":"1000","

[metnet]

Almost everbody knows asicminervalue.com
this website shows that DAYUN ZIG z1 14.50 USD (incl. electricity) 10.89 USD (excluding electricity)
it is completely wrong. i warned them many times. they did not change. actual earning is around 8 usd. they show at least 35 percent more.
i think they are getting money from dayun zig miner resellers to sell more. would you please write to asicminevalue.com that is WRONG calculation or attitude.
you already know right calc. or you can see true calculation their https://cryptominer.deals/product/dayun-zig-z1

[Mordred80]

Anybody done the following?

Any feedback?

Z1 miner

Latest FW 1116

Modified miner.json file

from

"auto_frequent":"0","frequency":"900","

to

"auto_frequent":"1","frequency":"1000","

I did...does not work with Firmware 1116

about overclock , maybe next version. i need more test .
about hashrate goes down ,  just config autorestart , if hashrate low , auto restart will slove this problem.

New Firmware 20181116 - Overclocking bye bye

How do i know that? Very easy...

I made a lot of tests about OC
You can check it here: https://bitcointalk.org/index.php?topic=5038441.msg46842719#msg46842719

Before my miner stopped working (Fan Check Problem - now solved with version 20181116), i was running Firmware 20180930.
Firmware 20189030 was the first version with a working overclocking.

----------------------------------------------
All Firmware before 20180930
@900MHz: ~6GH/s using ~1200W
@1000Mhz: ~6GH/s using ~1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.

----------------------------------------------
Firmware 20180930
@900MHz: ~6,5GH/s using ~1200W
@1000Mhz: ~7,1GH/s using ~1400W (Chips ~3-4°C hotter)
Working OC, needing more power and getting a bit hotter...perfect.

----------------------------------------------
Firmware 20181116
@900MHz: ~6GH/s using less then 1200W
@1000Mhz: ~6GH/s using less then 1200W
You can set the MHz at 1000, it shows 100Mhz on the Mainpage of the miner BUT it does not work.

----------------------------------------------

So we are back to square one with the performance of the miner...

Don't get me wrong @Zigminer
I'm happy that you solved my problem with the Fan Check option.
But...yeah, the performance is gone cuz we can't overclock the miner with this firmware.

Edit:
And i have again the problem that at some point the hashrate goes down and i need to restart the miner so many times b4 it's back to normal.

[Andartis]

remove xnsub.. in my case that removed the rejects

wich pool, xnsub on?

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

Latest fw 1116, nicehash. xnsub on.

Thank you! That lowered the rejects to under 1%. But payrate seems the same.
Any explanation for the whole thing?

[moosavi]

Anyone has a better profit other than nicehash ? I tried big pools , lots of coins but never reached nicehash. Pools has a lot of rejects. Please suggest me a pool

I suggest guys who have damn zig z1 or zig z1+ to connect to Blockmasters pool.
I compared many days my earning with blockmasters and  nicehash.
Nowadays the earning has realy decreased in nicehash and other pools. So I desided to change the pool and test different ones.
I got the best result in blockmastes. You can also check in pool mining calculator sites.
In blockmastets I tried European server:

stratum+tcp://eu.blockmasters.co:4533
Yor wallet address as USER NAME
C=BTC  as pass

You can also check the earning of different pools here:
https://minerstat.com/mining-calculator
 

I hope I could help guys

I have 30%-40% reject hash permanently with Blockmasters. Do you have the same?

Yes I Have the same percent rejected Hash in the pool. but in z1 dashboard it is 2.44% rejects.
pool rejects is more important.

We are seeing the same rejects for all of these miners on our site.  Looking into the forum it looks like this is a common occurance with these miners.  Keep in mind the rejects are the miner passing bad data to the pool stratum.  Keep in mind the hashrate reported on the site is the hash the site is accepting.  The rejects are jobs that were not accepted, and that hash is already subtracted from the hashrate on the site.  So if you are seeing 6GH on the site with 35% rejects, the site is ACCEPTING 6GH from the miner. 

Let us know if there is anything we can do!

Thank you for your information

Dear friend in Blockmasters
Hi,
Is it necessary to add #xnub like this:  (stratum+tcp://eu.blockmasters.co:4533#xsnub) to decrease the rejects or just let it mine without #xsnub ?
Other friends seems like to have the same question.

[Yezzzuurrr]

xsnub? xnsub... when i add xnsub i get lots of MORE rejects

Anyone has a better profit other than nicehash ? I tried big pools , lots of coins but never reached nicehash. Pools has a lot of rejects. Please suggest me a pool

I suggest guys who have damn zig z1 or zig z1+ to connect to Blockmasters pool.
I compared many days my earning with blockmasters and  nicehash.
Nowadays the earning has realy decreased in nicehash and other pools. So I desided to change the pool and test different ones.
I got the best result in blockmastes. You can also check in pool mining calculator sites.
In blockmastets I tried European server:

stratum+tcp://eu.blockmasters.co:4533
Yor wallet address as USER NAME
C=BTC  as pass

You can also check the earning of different pools here:
https://minerstat.com/mining-calculator
 

I hope I could help guys

I have 30%-40% reject hash permanently with Blockmasters. Do you have the same?

Yes I Have the same percent rejected Hash in the pool. but in z1 dashboard it is 2.44% rejects.
pool rejects is more important.

We are seeing the same rejects for all of these miners on our site.  Looking into the forum it looks like this is a common occurance with these miners.  Keep in mind the rejects are the miner passing bad data to the pool stratum.  Keep in mind the hashrate reported on the site is the hash the site is accepting.  The rejects are jobs that were not accepted, and that hash is already subtracted from the hashrate on the site.  So if you are seeing 6GH on the site with 35% rejects, the site is ACCEPTING 6GH from the miner. 

Let us know if there is anything we can do!

Thank you for your information

Dear friend in Blockmasters
Hi,
Is it necessary to add #xnub like this:  (stratum+tcp://eu.blockmasters.co:4533#xsnub) to decrease the rejects or just let it mine without #xsnub ?
Other friends seems like to have the same question.

[Yezzzuurrr]

xsnub wont work, it is xnsub? but anyway, like i said above, allready tried xnsub and in my case it gets way MORE rejects...

remove xnsub.. in my case that removed the rejects

wich pool, xnsub on?

I am getting between 10% and 17% rejects on nicehash. Is there anything I can do to reduce that?

Latest fw 1116, nicehash. xnsub on.

Hi, with blockmasters i do not have xnub (stratum+tcp://eu.blockmasters.co:4533) but a lot of rejections.

 should I add xsnub to get               (stratum+tcp://eu.blockmasters.co:4533#xsnub)

[Pedram_01]

Almost everbody knows asicminervalue.com
this website shows that DAYUN ZIG z1 14.50 USD (incl. electricity) 10.89 USD (excluding electricity)
it is completely wrong. i warned them many times. they did not change. actual earning is around 8 usd. they show at least 35 percent more.
i think they are getting money from dayun zig miner resellers to sell more. would you please write to asicminevalue.com that is WRONG calculation or attitude.
you already know right calc. or you can see true calculation their https://cryptominer.deals/product/dayun-zig-z1

Hi

Hundred percent right and dayun zig miner Thief company