jstefanop (OP)
Legendary
Offline
Activity: 2137
Merit: 1398
|
|
August 23, 2019, 04:33:24 PM |
|
i can't get my miner to connect to the wifi, it's like right next to the router. I have an Apple airport extreme model, lastest generation (6th generation). does anyone have an apple router and connected it with success to WIFi
Ive ran it on an old Airport express fine. Its probably not connecting due to your router being in mixed mode for SSID and/or compatable mode for encryptions. To minimize all issues have a separate SSID for 2.4ghz thats only straight b/g, and WPA2 only.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2137
Merit: 1398
|
|
August 23, 2019, 04:34:07 PM |
|
FYI @patrik was nice enough to add Apollo support to Awesome miner for whoever uses that!
|
|
|
|
Fu Ren
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 24, 2019, 01:16:48 PM |
|
FYI @patrik was nice enough to add Apollo support to Awesome miner for whoever uses that!
Very interesting feature - can you please share a quick sert up for making the Apollos and Awesome miner work together? Thanks in advance!
|
|
|
|
dsaerpe
Jr. Member
Offline
Activity: 33
Merit: 5
|
|
August 26, 2019, 03:46:22 PM |
|
Just a quick reminder to give the apollo a dust once in a while. I've given it a good blast with compressed air after running for about 6 months, as I noticed it was a little furred up (only a bit, I have brushed the dust out before).Temps have dropped from 78 to 69, so its worth doing.
|
|
|
|
robonova
Newbie
Offline
Activity: 7
Merit: 0
|
|
August 26, 2019, 05:01:54 PM |
|
I have a batch 1 that was running fine. I had to go out of town for a few weeks so I turned it off. When I turned it back on today it's getting 50% hardware errors only hashing about 30 MH/s on eco mode i've also tried other modes with more or less the same results. The miner temp on auto is 62C and the MCU temp is 62C. I actually have 2 and my other one is working just find. What can I do to fix this?
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2137
Merit: 1398
|
|
August 26, 2019, 06:55:32 PM |
|
I have a batch 1 that was running fine. I had to go out of town for a few weeks so I turned it off. When I turned it back on today it's getting 50% hardware errors only hashing about 30 MH/s on eco mode i've also tried other modes with more or less the same results. The miner temp on auto is 62C and the MCU temp is 62C. I actually have 2 and my other one is working just find. What can I do to fix this?
Did you change anything on the pool? Sounds like a temporary pool error. Try rebooting it and see if it keeps doing the same thing (and check Litecoinpool.org to rule out pool issues if you running on a different pool). If that doesn't work try an SD card re-flash.
|
|
|
|
robonova
Newbie
Offline
Activity: 7
Merit: 0
|
|
August 26, 2019, 07:17:57 PM |
|
Did you change anything on the pool? Sounds like a temporary pool error. Try rebooting it and see if it keeps doing the same thing (and check Litecoinpool.org to rule out pool issues if you running on a different pool). If that doesn't work try an SD card re-flash.
I did reboot several times and also checked different pools and all had the same problem. After running for a few hours it has gotten better but still is only hacking at 90 MH/s with still 5% hardware errors.
|
|
|
|
robonova
Newbie
Offline
Activity: 7
Merit: 0
|
|
August 26, 2019, 08:35:15 PM |
|
Everything seems to be working ok now. It's almost like it need to "warm up". Odd
|
|
|
|
almartins
Jr. Member
Offline
Activity: 47
Merit: 2
|
|
August 27, 2019, 01:45:33 PM |
|
Everything seems to be working ok now. It's almost like it need to "warm up". Odd
The same here after 6 days stopped, first hours hardware errors start high but decrease to normality.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2137
Merit: 1398
|
|
August 27, 2019, 05:38:17 PM |
|
Everything seems to be working ok now. It's almost like it need to "warm up". Odd
Thats a pool issue. What pool are you running on? Hashrate displayed is an average, so what's going on is that your pool is causing the miner to spit out a lot of errors when if first connects (most likely due to it being a mutipool and/or starting off the miner with way to low of a diff), then when is starts to mine fine the average slowly starts to go up.
|
|
|
|
VictorGT
|
|
August 28, 2019, 12:24:30 PM Last edit: August 28, 2019, 03:33:11 PM by VictorGT |
|
Hi,
I notice difference at fan settings from batch 1 to batch 2.
I have 2 Apollo batch 1, they have both the fan fixed at 10%, about 1800 RPM. I also have 2 Apollo batch 2, both with fans at 20 % about 1500 RPM.
Is this correct? Maybe different fans each batch, maybe a software bug?
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2137
Merit: 1398
|
|
August 28, 2019, 06:18:41 PM |
|
Hi,
I notice difference at fan settings from batch 1 to batch 2.
I have 2 Apollo batch 1, they have both the fan fixed at 10%, about 1800 RPM. I also have 2 Apollo batch 2, both with fans at 20 % about 1500 RPM.
Is this correct? Maybe different fans each batch, maybe a software bug?
Yes Batch 1 fans were 6k RPM fans which were overkill, Batch 2 Fans are 5k RPM which allows them to be even quieter on ECO mode.
|
|
|
|
robonova
Newbie
Offline
Activity: 7
Merit: 0
|
|
August 29, 2019, 09:25:59 PM Last edit: August 29, 2019, 09:54:57 PM by robonova |
|
It's been running great for a few days now and then I restarted them again and this time it's just blinking green and i can't get to the web interface. What does blinking green mean? Is there somewhere that tells what the blinking patterns mean?
EDIT: Self Answered. I found a post that had what the lights mean. Supposedly slow green blink means bfminer is connected but that's not the case. The issue for me was that my router wasn't handing it an ip address because i've had some issues with the DHCP server on it. Once I rebooted the router and then rebooted the Apollo all was fine.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2137
Merit: 1398
|
|
August 30, 2019, 03:31:24 PM |
|
It's been running great for a few days now and then I restarted them again and this time it's just blinking green and i can't get to the web interface. What does blinking green mean? Is there somewhere that tells what the blinking patterns mean?
EDIT: Self Answered. I found a post that had what the lights mean. Supposedly slow green blink means bfminer is connected but that's not the case. The issue for me was that my router wasn't handing it an ip address because i've had some issues with the DHCP server on it. Once I rebooted the router and then rebooted the Apollo all was fine.
Yes, just plain blinking green means miner has started and is waiting for work from server. This is always some sort of network connectivity issue.
|
|
|
|
AnkleBiter
Newbie
Offline
Activity: 23
Merit: 1
|
|
August 31, 2019, 02:59:28 PM |
|
Any way of plugging in a Moonlander into the USB port (either directly or through a hub) of the Apollo and have it mine as well? I have a spare Moonlander 2 and want to see if I can run it through the Apollo running.
|
|
|
|
estacionsj
Jr. Member
Offline
Activity: 55
Merit: 2
|
|
September 01, 2019, 12:01:10 AM |
|
great question, i need to know 2. I also have a moonlander that i am not using and would be great if u can connect to apollo
|
|
|
|
bonestabone
Newbie
Offline
Activity: 4
Merit: 0
|
|
September 01, 2019, 06:22:01 AM |
|
I finally got around to setting up my two Apollo's with wifi and put them in the garage, but noticed that when running them both I had to change the default hostname 'futurebit' of one otherwise it didn't work, like there was a conflict or something. Maybe it would be easier to have the ability to change the hostname from the web interface, I had to ssh into the device from the terminal.
|
|
|
|
sivanischal
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 02, 2019, 06:28:06 PM |
|
Hi There,
Greetings..!
i am always getting the below error message in the Apollo Dash board, can someone help here. Thanks!
It seems there is a problem to communicate with the miner, check error message.
Error: connect ECONNREFUSED 127.0.0.1:4028
|
|
|
|
LiteLTC
Newbie
Offline
Activity: 12
Merit: 0
|
|
September 02, 2019, 10:20:11 PM |
|
I need help adding my second apollo miner onto the dashboard. How do I do this? Everytime I use angry ip scanner then log in it shows my first apollo miner.
|
|
|
|
LiteLTC
Newbie
Offline
Activity: 12
Merit: 0
|
|
September 02, 2019, 11:09:14 PM |
|
Worker #2 is solid red. I made a secondary worker account on litecoinpool.org and linked it on the dashboard. Now I cannot find the IP address to get in the dashboard for worker #2.
|
|
|
|
|