The Habanero - 650GH/s - OOS

[bcollan]

I took my h100i off the board to attach it like the picture and now it's not working , doh.

I'm getting a libusb error pipe, libusb not found error.

Hashfast detect failed to initialize incorrect device.

The device keeps adding and disabling the device with those previous errors.

I'm using minepeon  2.4.6 with cgminer 4.3.4.

I also had this problem when I wasn't getting enough air flow across the board. Make sure the tubing's not contacting the board preventing cool air from getting to the components.

[ZBC3]

When you say reverse the fans on the cooler (h100i in my case), are you saying to mount the fans on the opposite side or do they stay on the same side but flipped backwards?

[gateway]

Finally got my 2 units up and running. They blow up at anything faster than 550 mhz... so I need to put some tweaking time in.

did you try the pepper app tool to see what your temps where per die? this helps as a first pass, then of course a decent fan on the cooler is required to really push these suckers..

[ZBC3]

What program do I open the pepper mining app with on a RPi?


I tried using windows but I only get the spinning wheel.

[gateway]

What program do I open the pepper mining app with on a RPi?


I tried using windows but I only get the spinning wheel.

you need to run your miner with --api-listen --api-network

and if your on the same network then enter the ip of the pi, and default port 4028 (unless you changed that in the cgminer config)

[nexus99]

Finally got my 2 units up and running. They blow up at anything faster than 550 mhz... so I need to put some tweaking time in.

did you try the pepper app tool to see what your temps where per die? this helps as a first pass, then of course a decent fan on the cooler is required to really push these suckers..

My next goal is to buy some screaming fans to suck air through the coolers. I have Glacier 240L and the fans seem pretty weak honestly.

Next to the fans on my antmiers they are doing nothing.

I am open to suggestions for outstanding 120mm fans that can run off the fan header on the board.

This looks interesting:

http://www.frozencpu.com/products/12944/fan-858/Sunon_120mm_x_25mm_Precision_Ball_Bearing_Fan_-1500_CFM_PMD1212PTB1-A.html?tl=g36c435s1106

[nexus99]

When you say reverse the fans on the cooler (h100i in my case), are you saying to mount the fans on the opposite side or do they stay on the same side but flipped backwards?

I think they mean to suck air through the radiator rather than push it through.

[QuiveringGibbage]

This looks interesting:
http://www.frozencpu.com/products/12944/fan-858/Sunon_120mm_x_25mm_Precision_Ball_Bearing_Fan_-1500_CFM_PMD1212PTB1-A.html?tl=g36c435s1106

I bought 5 of them from eBay, haven't tried them out yet as i am still waiting for my Habenero boards to arrive.

Also have a H100i and a XSPC RayStorm D5 Photon RX360 V3 Water Cooling Kit. See http://imgur.com/a/SMBJP

Prepared,
QG

[btchedge]

Well I spent a good bit of time breaking the rules and testing higher voltages / clockrates and cooling configurations. I am by no means suggesting that anyone attempt to replicate! I seem to get the best performance with the following settings...

Voltage: .995V
Clockrate: 975Mhz
Temps: 94-99
Hashrate: 750 GH/s +/-
Kill-a-watt: 1157

About 60 watts are from some ridiculously powerful fans that I swapped out with the stock fans on a CoolerMaster 240L. I started this machine around 5AM CST and it was running at 750 until this afternoon when it dropped a little. Perhaps that was due to increased ambient temps which were lower overnight, and are in the mid to upper 70s right now. I just took these screen shots a few minutes ago.

More tweaking to come, but pretty optimistic so far.

[achtung082]

It lives! Very nice bit of kit guys good job. Any chance you have a flat plate for the back or the board so these can be mounted back to back on a water block?
https://i.imgur.com/R8Sytcj.jpg

Running on a Pi with cgminer_4.3.4 @ 780 for now until some more goodies arrive.
https://i.imgur.com/JiGJjlW.jpg

The cooler is Nepton 280L, I had to lap it a bis as the finish was a bit rough..

Can anyone help me with a rookie issue please? Cgminer is not showing status in the windows as it should and I can't remember how to fix this issue.

[r00t$]

Can anyone tell me the equivalent to the --api-listen --api-network in the cgminer config file?

In my config file, I'm using

^{"api-listen" : true,
"api-network" : true,}

The Pepper app is working and displaying current hash rate, average rate, data in the ASC tab, etc... but the individual die temperatures are showing 0 and the stats page is blank.

Thoughts?

[achtung082]

Can anyone tell me the equivalent to the --api-listen --api-network in the cgminer config file?

In my config file, I'm using

^{"api-listen" : true,
"api-network" : true,}

The Pepper app is working and displaying current hash rate, average rate, data in the ASC tab, etc... but the individual die temperatures are showing 0 and the stats page is blank.

Thoughts?

Think you need the port number, my line command looks like this"--api-port 4028 --api-listen --api-network".

[daemonfox]

Well I spent a good bit of time breaking the rules and testing higher voltages / clockrates and cooling configurations. I am by no means suggesting that anyone attempt to replicate! I seem to get the best performance with the following settings...

Voltage: .995V
Clockrate: 975Mhz
Temps: 94-99
Hashrate: 750 GH/s +/-
Kill-a-watt: 1157

About 60 watts are from some ridiculously powerful fans that I swapped out with the stock fans on a CoolerMaster 240L. I started this machine around 5AM CST and it was running at 750 until this afternoon when it dropped a little. Perhaps that was due to increased ambient temps which were lower overnight, and are in the mid to upper 70s right now. I just took these screen shots a few minutes ago.

More tweaking to come, but pretty optimistic so far.

PICS!!!!

Breakdown of parts, price and where to get them? Also you mentioned a case etc in another post... let us see what you got... I am curious on just how much it would cost to part your setup out including PSU and rPi.

[btchedge]

Can anyone tell me the equivalent to the --api-listen --api-network in the cgminer config file?

In my config file, I'm using

^{"api-listen" : true,
"api-network" : true,}

The Pepper app is working and displaying current hash rate, average rate, data in the ASC tab, etc... but the individual die temperatures are showing 0 and the stats page is blank.

Thoughts?

Here is what my mine.conf file looks like...
__________________________________________
{
"pools" : [
         {
                "url" : "stratum+tcp://stratum.mining.eligius.st:3334",
                "user" : "xxx",
                "pass" : "1234"
        },
        {       "url" : "us1.ghash.io:3333",
                "user" : "xxx"
                "pass" : "123"
        }
],
"hfa-fan" : "100",
"hfa-fail-drop" : "0",
"hfa-temp-target" : "0",
"hfa-temp-overheat" : "110",
"hfa-hash-clock" : "975",
"api-allow": "127.0.0.1,192.168.237.99"
}
__________________________________________

And here is the mine.sh file...
__________________________________________
/home/xxx/xxx/cgminer-4.3.4/cgminer --api-network  --api-listen --config /home/xxx/xxx/cgminer-4.3.4/mine.conf

__________________________________________

[gateway]

Feel free to send us your habnaero pics and we will post them on a site in a gallery!

cheers!

[Taugeran]

I wanna see one of these cryo cooled even if it's el cheapo CO₂ cooling

[nexus99]

Any issue using fans with 3 pin headers?

[MrTeal]

Any issue using fans with 3 pin headers?

No, but they won't PWM.

[nexus99]

Any issue using fans with 3 pin headers?

No, but they won't PWM.

Cool, thanks. I think they are going to be 100% all the time anyway :-)

[xjack]

Here's a couple pics of mine hashing away.

https://www.dropbox.com/sh/1393pxn1hjkua5h/AAB3RDZUzA30PiD3Av3zh26La