[ANN] NiceHash.com - sell & buy hash rate cloud mining service / multipool

[Lontonbit]

I think it's my gpu"s interfering with my wifi antenna

[sherm77]

Anyone else having trouble with nice hash? Miners keep dropping in the pool

Are you mining directly to Nicehash or are you using a proxy service or miningrigrentals?  Also, do you have extranonce subscription turned on?  Not knowing what type of miners you have, this may be of some assistance:  https://www.nicehash.com/asic-mining

Also, you might check out the difficulty that your miners are running at, it has to be compatible with Nicehash.  This link isn't related directly to your issue, but gives info on difficulties that Nicehash expects:  https://www.nicehash.com/pool-operators

I hope this isn't a rabbit trail for you.

[micax1]

Hello, I need official reply for this:

I have an old account ~ 3 years old, that I cannot login now. I was contacting support by mail (from the mail account was registered) - and they stopped responding couple days ago. (I was given regular advises first - like clean cache and cookies.... but I did try already 3 browsers with all possible configs etc..)
Please let me know if it is normal, or what`s going on.
Currently I do all mining on another account, but I need to restore access to my old one!
Thank you.

[lordmick2]

about Quark market... since we go from Gh/s to Th/s its almost impossible to get hash. There is barely enough to fill a single order... and the minimum is 0.01Th/s or 10 Gh/s... there is no coin using quark algo that worth have that much for a single miner..... is it possible to take the minimum order back down to 50Mh/s??

[shintosai]

@Nicehash

Is there anyway you guys could lower the payout threshold so that we don't have to wait so long to receive payouts.

Often when i mine somewhere else and return to nicehash the payout day changes and make me skip a week. Sometimes this leads to loses as bitcoin price changes.

On your site it says "Once per week for external wallet unpaid balances, greater than 0.01 BTC" But just because i stopped mining for a few days it says i'll get my next payout on the 22nd.
I find this is too long to wait considering i still have a considerable amount of BTC ~0.007BTC for the next payout date on the 15th. I could be doing things with that BTC to increase my profits i make!

Please! You guys should at least consider allowing manual payouts starting at 0.005BTC+, and just keep your 0.01BTC auto payout for people that are not interested. You guys have had this payout threshold forever! 

well its a fact that nicehash made this threshold so we cant do anything but for them to consider your request maybe if they can fine that helpful for the
miners maybe they can consider that mate, but right now we just need to wait if what would be the responds coming from them.

[DarrenJC]

@NiceHash

Just installed NiceHash Miner 2.0.1.1 - Beta

Starting Excavator Server...


Been like that for 20 minutes now.... ??

[Edit]
That actually finished... cant benchmark my 1070 now

[micax1]

Hello, I need official reply for this:

I have an old account ~ 3 years old, that I cannot login now. I was contacting support by mail (from the mail account was registered) - and they stopped responding couple days ago. (I was given regular advises first - like clean cache and cookies.... but I did try already 3 browsers with all possible configs etc..)
Please let me know if it is normal, or what`s going on.
Currently I do all mining on another account, but I need to restore access to my old one!
Thank you.

well still no answer?

[cyberpitstop]

The mark of a great company is the speed at which they take care of their current customers. Well see what happens.

[jpouza]

Nicehash legacy miner 1.8.1.3 Pre-Release 1 works fine, except it do not run XMR miner benchmark on my nvidia cards.

Other releases as 1.8.1.3 Pre-Release 2 and final 1.8.1.3 do not work with my second 1070GTX...it sets the miner to work with my 1080Ti instead...bizarre.

[NoHash]

Is it just me.

I am pretty much priced out of mining for the time being, at just .29 cents profit per card, it is not worth the work.

838 cryto mining pays just $1.06

[NoHash]

I KNEW it.

Based on the lack of response, I was the last person to mine NiceHash, heck, I do not know how to turn off the lights!

[micax1]

Hello, I need official reply for this:

I have an old account ~ 3 years old, that I cannot login now. I was contacting support by mail (from the mail account was registered) - and they stopped responding couple days ago. (I was given regular advises first - like clean cache and cookies.... but I did try already 3 browsers with all possible configs etc..)
Please let me know if it is normal, or what`s going on.
Currently I do all mining on another account, but I need to restore access to my old one!
Thank you.

well still no answer?

Seems like no support here? no answers w email too - for like 6 days already.
That rise huge concerns.

[benji75]

I am a noob at mining but just a question let s say I own ten of those bitmain l3+ which cost around 2000+ usd

and I see that each of them could give me 900+ profit per month , it will mean after my initial investment of 20k after around 3month, I would average 9k $ month just for renting them to nicehash ?

this seems too good to be true or am I missing something capital here ? thanks for your input

[CNoteFan]

Anyone have a suggestion how I can get the starting minimum difficulty working when using cpuminer-gc3355?  I'm running 60 of the 5-chip Gridseed miners and prefer to have them mining at a difficulty around 256.  Nicehash starts the difficulty at 32k. 

I followed these instructions - [https://www.nicehash.com/help/how-can-you-adjust-the-difficulty-on-third-party-miners]

I successfully mine on other sites that allow setting the difficulty in the password, like litecoinpool.org.  Here's part of the configuration file: 

--url=stratum+tcp://scrypt.usa.nicehash.com:3333 --user=33qTpkQ8uktGvv9oaBUQ6amXjCw99xcde.CNoteFan --pass=d=256

Any ideas?

[lxp365]

NiceHashBot v1.0.3.3

There are many problems
First, change the price is very slow, I created the order after a long time, the order price has remained "0.0010" for a long time. The hash always been "0" and it does not seem to automatically change the price, which leads me to have been unable to get hashing power

Second, I manually set the order to a suitable price, but when someone else's order exceeds my price, the NiceHashBot raised the price very slowly, and even kept the original price unchanged until my order dies for a long time , After my test, this happens in CryptoNight and Equihash algorithms

Third, this happens at sha256, no matter how i set it up, the order price has been continuously lowered even if the order price is lower than all until the order dies. The The The The

I am a big customer of NICEHASH, I need NiceHashBot to manage my large number of orders, hope you can understand, and give me a reply, thank you

[NN900]

I have a question for miners. Just started with nicehash and getting paid directly in BTC.
If I start mining some other coin, let´s say Musicoin directly with claymore, can I input my nicehash BTC wallet into BAT file and get BTC onto my wallet instead of ´musicoins´? ((if yes, are musicoins just converted into BTC´s at current rate at some exchange?)) Thanks!

[lunas]

newest legacy miner locks up when cpu mining

[Icon]

Hey Nicehash, I don't know which one is wrong but, either your site or super nova are mining different decred forks.. Cause i have to change the version of ccminer each time i switch between your 2 pools. Super nova is accepting shares using ccminer-64x version 2.2 (<...latest build ) and your version is 32 bit, 1.8 dev version. If i try using the same version on the wrong pool my shares don't get accepted

Icon

[BrayanFury]

Boт нaxepa дeлaть cpaныx бoтoв ? Зaдoлбaли yжe,либo блядь,бepи opдep caм либo пиздyй к xyям.A тo блять нacтpoит бoтa и cидит дpoчит.Чтo нa биpжe,чтo здecь oдни пидapacы нe cпocoбныe ниxyя вpyчнyю cдeлaть.Bы блять пoнимaeтe чтo caйт c opдepaми oбнoвляeтcя мeдлeннee чeм бoт мeняeт цeнy ?Либo yбиpaйтe иx нaxyй,либo иcпpaвляйтe caйт чтoб oбнoвлялcя быcтpee бoтa
 

[virtualrobotix]

Hi,
i'm start to use nicehash this summer and i'm happy about the result obtain until now but i have some iusse and i cannot patch myself the problem on client as for legacy version so ask if is possibile to manage this situation.

I have the problem that some time the nicehash stop to mine properly on one of my rig . I'm using simple rig base on win10 with 5 nvidia GPU 1070 without overclock .

The problem is that i don't recive the message that inform me that the miner stop to work properly because when i check i found the application work but some gpu or all gpu stop to mine.

Could be possible to solve this iuse only to stop the application and restart it .

So the function that could be iusefull in the next version could be a function that stop the nicehash client and restart when the profitabily of clieng go down a specific value .

what do you think about this patch ? could be possible to implement ? If will be available the source code of app i can patch it myself
best
Roberto