cryptoGlance [v2.1] :: Open-source, self-hosted, multi-rig monitoring tool!

[cryptoglance]

Just released a new Nightly build:
v2.0.2.796

The changelog:

   [ v2.0.2.796 ]

    FEATURES
    ========
    - MobileMiner support. Can be enabled via Settings. http://www.mobileminerapp.com/

    POOLS
    =====
    - [+POOL] Burst.Ninja
    
    HOTFIXES
    ========
    - Fixed issue where offline rigs would randomly appear/disappear in the overview panel

Edit: This also includes "Best Share" for mining rigs (@Mikestang)

[vabchgent]

Just released a new Nightly build:
v2.0.2.796

The changelog:

   [ v2.0.2.796 ]

    FEATURES
    ========
    - MobileMiner support. Can be enabled via Settings. http://www.mobileminerapp.com/

    POOLS
    =====
    - [+POOL] Burst.Ninja
    
    HOTFIXES
    ========
    - Fixed issue where offline rigs would randomly appear/disappear in the overview panel

Edit: This also includes "Best Share" for mining rigs (@Mikestang)

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

[cryptoglance]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

[vabchgent]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

[cryptoglance]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

[Mikestang]

Just released a new Nightly build:
v2.0.2.796

The changelog:

   [ v2.0.2.796 ]

    FEATURES
    ========
    - MobileMiner support. Can be enabled via Settings. http://www.mobileminerapp.com/

    POOLS
    =====
    - [+POOL] Burst.Ninja
    
    HOTFIXES
    ========
    - Fixed issue where offline rigs would randomly appear/disappear in the overview panel

Edit: This also includes "Best Share" for mining rigs (@Mikestang)

Great, look forward to checking out the updates. My phone broke so I have had the chance yet to get the mobile app going.

[vabchgent]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

I just set the key . I will check it when I get home - The website does not see the computer yet.

Update been almost an hour. The computer with cryptoglance does not show up on the mobile miner web site. If I log in at the link you gave me above I should see a registered computer. My machine does not show. Thanks

I have to log in with my email and xxx-xxx-xxx

Not sure how you tested this api. But if you go to this link http://web.mobileminerapp.com/   create the api key and then log into the site with it. If the api is working you will see your miners .

[nwoolls]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

I just set the key . I will check it when I get home - The website does not see the computer yet.

Update been almost an hour. The computer with cryptoglance does not show up on the mobile miner web site. If I log in at the link you gave me above I should see a registered computer. My machine does not show. Thanks

I have to log in with my email and xxx-xxx-xxx

Not sure how you tested this api. But if you go to this link http://web.mobileminerapp.com/   create the api key and then log into the site with it. If the api is working you will see your miners .

I think there is some confusion here. Users should be entering an Application Key, not an API Key. The API Key should be hard coded by the application developer.

The application developer requests one API Key and uses that for their application. Users request a single Application Key and set that up in whatever miner - cryptoGlance in this case.

Users should not be requesting API Keys.

[vabchgent]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

I just set the key . I will check it when I get home - The website does not see the computer yet.

Update been almost an hour. The computer with cryptoglance does not show up on the mobile miner web site. If I log in at the link you gave me above I should see a registered computer. My machine does not show. Thanks

I have to log in with my email and xxx-xxx-xxx

Not sure how you tested this api. But if you go to this link http://web.mobileminerapp.com/   create the api key and then log into the site with it. If the api is working you will see your miners .

I think there is some confusion here. Users should be entering an Application Key, not an API Key.

The application developer requests one API Key and uses that for their application. Users request a single Application Key and set that up in whatever miner - cryptoGlance in this case.

Users should not be requesting API Keys.

Nwoolls - The key I am using is the user key sorry for any confusion.

[nwoolls]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

I just set the key . I will check it when I get home - The website does not see the computer yet.

Update been almost an hour. The computer with cryptoglance does not show up on the mobile miner web site. If I log in at the link you gave me above I should see a registered computer. My machine does not show. Thanks

I have to log in with my email and xxx-xxx-xxx

Not sure how you tested this api. But if you go to this link http://web.mobileminerapp.com/   create the api key and then log into the site with it. If the api is working you will see your miners .

I think there is some confusion here. Users should be entering an Application Key, not an API Key.

The application developer requests one API Key and uses that for their application. Users request a single Application Key and set that up in whatever miner - cryptoGlance in this case.

Users should not be requesting API Keys.

Nwoolls - The key I am using is the user key sorry for any confusion.

Understood but cryptoglance also stated:

The API key you need to enter into CryptoGlance settings is without the -.

It sounds to me like there may be some misunderstanding in how cryptoGlance is setup to use the MobileMiner API. The end user should be entering an Application Key, with dashes, not an API Key without dashes.

[vabchgent]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

I just set the key . I will check it when I get home - The website does not see the computer yet.

Update been almost an hour. The computer with cryptoglance does not show up on the mobile miner web site. If I log in at the link you gave me above I should see a registered computer. My machine does not show. Thanks

I have to log in with my email and xxx-xxx-xxx

Not sure how you tested this api. But if you go to this link http://web.mobileminerapp.com/   create the api key and then log into the site with it. If the api is working you will see your miners .

I think there is some confusion here. Users should be entering an Application Key, not an API Key.

The application developer requests one API Key and uses that for their application. Users request a single Application Key and set that up in whatever miner - cryptoGlance in this case.

Users should not be requesting API Keys.

Nwoolls - The key I am using is the user key sorry for any confusion.

Understood but cryptoglance also stated:

The API key you need to enter into CryptoGlance settings is without the -.

It sounds to me like there may be some misunderstanding in how cryptoGlance is setup to use the MobileMiner API. The end user should be entering an Application Key, with dashes, not an API Key without dashes.

I tried both ways and got no response on the website side. Thanks

[nwoolls]

Mobile miner api is not working. Thanks in advance
I go to mobile miner site and have no machines listed. I have a copy of multi miner that does work with same api. Not trying to use them both at the same time. Thanks

Thanks for the report. Can you verify that you've entered in the application API key and your email address in CryptoGlance settings?

The API Key should be the one provided to you from this page (You must be logged out to see this page): http://web.mobileminerapp.com/

I tried the api key with and without the - - in the middle of the key and the email address associated with the account and can log in on the mobileminer site with both. I do not see any machines when connected with cryptoglance. If I stop cryptoglance and start the other app that uses the key. I can see my machines. Thanks

The API key you need to enter into CryptoGlance settings is without the -.

Can you try the API key without the - and waiting ~5 minutes? The API might be throttling connections

I just set the key . I will check it when I get home - The website does not see the computer yet.

Update been almost an hour. The computer with cryptoglance does not show up on the mobile miner web site. If I log in at the link you gave me above I should see a registered computer. My machine does not show. Thanks

I have to log in with my email and xxx-xxx-xxx

Not sure how you tested this api. But if you go to this link http://web.mobileminerapp.com/   create the api key and then log into the site with it. If the api is working you will see your miners .

I think there is some confusion here. Users should be entering an Application Key, not an API Key.

The application developer requests one API Key and uses that for their application. Users request a single Application Key and set that up in whatever miner - cryptoGlance in this case.

Users should not be requesting API Keys.

Nwoolls - The key I am using is the user key sorry for any confusion.

Understood but cryptoglance also stated:

The API key you need to enter into CryptoGlance settings is without the -.

It sounds to me like there may be some misunderstanding in how cryptoGlance is setup to use the MobileMiner API. The end user should be entering an Application Key, with dashes, not an API Key without dashes.

I tried both ways and got no response on the website side. Thanks

Right - I think the cryptoGlance app itself maybe setup incorrectly. I wasn't trying to imply there was something you should do on your end. Based on what cryptoglance stated it sounds like there may be a misunderstanding in the cryptoGlance implementation. He's in touch on IRC so hopefully we can get it squared away soon.

Edit: My guess is that cryptoglance hard-coded his Application Key and made the API Key configurable instead of vice-versa. So your email address is not going to work with his Application Key.

[cryptoglance]

Damn. Sorry, I'm not sure how I confused this.

I have pushed a new nightly build that should correct this.

New build: v2.0.2.799

[vabchgent]

Damn. Sorry, I'm not sure how I confused this.

I have pushed a new nightly build that should correct this.

New build: v2.0.2.799

Bingo guys that fixed the problem. Nwoolls as always thank you for your help and great development work. Cryptoglance thanks for getting it fixed and for a nice app.

[cryptoglance]

Awesome

Thanks nwoolls!

[Mikestang]

Thanks for adding best share, now I really have no reason to look at anything other than cryptoGlance to get all the info I'm after.

I got the phone app up and running as well, very cool.  Now I can check in on my miners while I'm at work.

Great application, thanks again!  More donations when I solve my first block.

[cryptoglance]

Thanks for adding best share, now I really have no reason to look at anything other than cryptoGlance to get all the info I'm after.

I got the phone app up and running as well, very cool.  Now I can check in on my miners while I'm at work.

Great application, thanks again!  More donations when I solve my first block.

We're happy you enjoy it Feedback from the community is our encouragement to keep development going, thank you!

[Mikestang]

Thanks for adding best share, now I really have no reason to look at anything other than cryptoGlance to get all the info I'm after.

I got the phone app up and running as well, very cool.  Now I can check in on my miners while I'm at work.

Great application, thanks again!  More donations when I solve my first block.

We're happy you enjoy it Feedback from the community is our encouragement to keep development going, thank you!

Question: if I do not log out of the remote app, does it maintain a connection to my server at home and eat bandwidth?  Or does it close the connection on its own after a period of inactivity?

Is there a way to make the remote app "remember" me?  My password is super long and random, not fun to have to input every time.  Pending the answer to above, I could just never log out, but not sure.  If the connection is maintained, I will log out each time.  If the connection is not kept live, then there's really no need for me to log out of the app, and thus no need for it to remember me.

To get the remote app to connect using httpS I'm guessing I have to configure some stuff on my home computer/firewall, have any handy links where I can read up on this?  I know nothing about SSL, but I'm a fast learner.

[cryptoglance]

Question: if I do not log out of the remote app, does it maintain a connection to my server at home and eat bandwidth?  Or does it close the connection on its own after a period of inactivity?

On your android device, if you're using the web browser or cryptoglance app, when the app is not active on your screen it should pause any network connectivity... You can ensure it will not use data in the background by navigating to Android Settings (general phone settings) -> Data Usage -> CryptoGlance -> Restrict Background Data (enable this).

Is there a way to make the remote app "remember" me?  My password is super long and random, not fun to have to input every time.  Pending the answer to above, I could just never log out, but not sure.  If the connection is maintained, I will log out each time.  If the connection is not kept live, then there's really no need for me to log out of the app, and thus no need for it to remember me.

To get the remote app to connect using httpS I'm guessing I have to configure some stuff on my home computer/firewall, have any handy links where I can read up on this?  I know nothing about SSL, but I'm a fast learner.

Not too sure about an easy https implementation. It may not work correctly on cryptoglance, but I can look into this and follow up in about ~1 week

[Mikestang]

On your android device, if you're using the web browser or cryptoglance app, when the app is not active on your screen it should pause any network connectivity... You can ensure it will not use data in the background by navigating to Android Settings (general phone settings) -> Data Usage -> CryptoGlance -> Restrict Background Data (enable this).

Not too sure about an easy https implementation. It may not work correctly on cryptoglance, but I can look into this and follow up in about ~1 week

Ok, restricted background data on the android app.  The app does log out on it's own after a while, even if I don't specifically log out, causing me to have to re-input the password, so I don't know if it's possible to enable the app to remember the password and stay logged in or not, but it would be nice.

Thanks again!  Back to obsessively checking on my miners...