[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[shveicar]

How long in the penalty now for new started masternode ?

Restarts in 10 minutes more or less. No real penalty since everyone will need to restart

Whats the reward structure for running a masternode? Is it still profitable to run one?

You can count it yourself, but at the moment (if we take the fact that we have 80 active MNs), your income with one MN will be ~ 11 DMD or 82.5 $

[shveicar]

Hello everybody.

Can you please help with DMD wallet(3.0)
Can I have two same DMD wallets on two different PCs running for instance laptop and Desktop PC?
Will it cause any problems?

Best Regards,
Kinesispath

Yes, you can run several wallets on the one PC or laptop.
To do this, you need to create different folders for your wallet (for example DMD1 and DMD2) and launch wallets through a shortcut with content:

for DMD1 it

Code:

D:\diamond-qt.exe -datadir=D:\DMD1

for DMD2 it

Code:

D:\diamond-qt.exe -datadir=D:\DMD2

*this example is for a wallet located on the drive D:\
If you are using another drive, then just change this letter

And before running the one of wallet, you must add this line in the diamond.conf files

Code:

port=9997

You can also choose any other free port in your system. The main thing that would be different from 17771

[Kinesispath]

Hello everybody.

Can you please help with DMD wallet(3.0)
Can I have two same DMD wallets on two different PCs running for instance laptop and Desktop PC?
Will it cause any problems?

Best Regards,
Kinesispath

Yes, you can run several wallets on one PC or laptop.
To do this, you need to create different folders for your wallet (for example DMD1 and DMD2) and launch wallets through a shortcut with content:

for DMD1 it

Code:

D:\diamond-qt.exe -datadir=D:\DMD1

for DMD2 it

Code:

D:\diamond-qt.exe -datadir=D:\DMD2

*this example is for a wallet located on the drive D:\
If you are using another drive, then just change this letter

And before running the one of wallet, you must add this line in the diamond.conf files

Code:

port=9997

You can also choose any other free port in your system. The main thing that would be different from 17771

Thank you for your reply. It is very informative but actually answers my next question.
I asked a bit different thing. Not to run 2 wallets on same PC but 2 same wallets on 2 different PCs!?
For instance I have one PC in one city(Boston) and my laptop in another one(Helsinki), but I want to be able to use my DMD wallet in both cities...

[shveicar]

Thank you for your reply. It is very informative but actually answers my next question.
I asked a bit different thing. Not to run 2 wallets on same PC but 2 same wallets on 2 different PCs!?
For instance I have one PC in one city(Boston) and my laptop in another one(Helsinki), but I want to be able to use my DMD wallet in both cities...

If you are talking about the simultaneous launch of two identical wallet (with the same file wallet.dat) then this is possible.
But as soon as you make an outgoing transaction on one of the wallets, then on the second purse, your balance will automatically decrease 

[temp89]

@crowetic
I'm no dev, but the confirmation time for a staked coin pile is 640 blocks (approx 24 hours) and maturity time is 1 hour. Then you can stake the pile again.

I have two piles with 680 confirmations (after over 25 hours) and I still have 'Staking is not active'. I have Win10 and wallet ver. 3.0.0.13. In diamond.conf I have 'staking=1'.

I also get error every time I close the wallet. My debug.log shows:

2017-09-21 08:56:25 ProcessNewBlock : ACCEPTED
2017-09-21 08:56:25 ProcessNewBlock : ACCEPTED
2017-09-21 08:56:25 ProcessNewBlock : ACCEPTED
2017-09-21 08:57:08 net thread interrupt
2017-09-21 08:57:08 dumpaddr thread stop
2017-09-21 08:57:08 addcon thread interrupt
2017-09-21 08:57:08 msghand thread interrupt
2017-09-21 08:57:09 opencon thread interrupt
2017-09-21 08:57:09 PrepareShutdown: In progress...
2017-09-21 08:57:09 StopNode()
2017-09-21 08:57:09 Verifying mncache.dat format...
2017-09-21 08:57:09 Loaded info from mncache.dat  0ms
2017-09-21 08:57:09   Masternodes: 73, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 3, entries in Masternode list we asked for: 0, nDsqCount: 0
2017-09-21 08:57:09 Writting info to mncache.dat...
2017-09-21 08:57:09 Written info to mncache.dat  16ms
2017-09-21 08:57:09   Masternodes: 74, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 7, entries in Masternode list we asked for: 0, nDsqCount: 0
2017-09-21 08:57:09 Masternode dump finished  16ms
2017-09-21 08:57:09 Verifying budget.dat format...
2017-09-21 08:57:09 Loaded info from budget.dat  0ms
2017-09-21 08:57:09   Proposals: 0, Budgets: 0, Seen Budgets: 0, Seen Budget Votes: 0, Seen Final Budgets: 0, Seen Final Budget Votes: 0
2017-09-21 08:57:09 Writting info to budget.dat...
2017-09-21 08:57:09 Written info to budget.dat  0ms
2017-09-21 08:57:09 Budget dump finished  0ms
2017-09-21 08:57:09 Verifying mnpayments.dat format...
2017-09-21 08:57:09 Loaded info from mnpayments.dat  0ms
2017-09-21 08:57:09   Votes: 793, Blocks: 90
2017-09-21 08:57:09 Writting info to mnpayments.dat...
2017-09-21 08:57:09 Written info to mnpayments.dat  0ms
2017-09-21 08:57:09 Budget dump finished  0ms
2017-09-21 08:57:10 *** System error while flushing: CDB : Error -30974, can't open database
2017-09-21 08:57:14 CDBEnv::EnvShutdown : Error -30974 shutting down database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2017-09-21 08:57:14 Shutdown: done

After that when I try to run the wallet again I get the next error:

Program:
.........\diamond-qt.exe
File: main.cpp, Line 1979

Expression: pindex->GetBlockHash() == view.GetBestBlock()

But I think it's caused by DMD Core didn't exit safely earlier.

I would add that I haven't those errors in 3.0.0.12.

EDIT:

getstakingstatus
{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true
}

and still 'Staking is not active'

EDIT [resolved]

I have good news :-). I deleted wallet.dat (before I had dumped priv key, of course) and then I imported private key to new wallet. After that everything works out fine. Maybe it helps others. Sorry for the inconvenience.

[cryptonit]

please all update ur wallets!
once we reach above 51% wallets on new version we inform bittrex reopen exchange is possible
be aware non updated wallets will at some point no longer be accepted by the network!

MANDATORY WALLET UPDATE:
https://github.com/DMDcoin/Diamond/releases
in case u compiled linux headless wallets check #masternodesetupguides for help
on our slack

(links to slack u find in the release link above)

[jimsonunique]

Why are minting rewards so low? Was getting between 10 and 30 dmd on v2. Just minted 0.8. barely worth it anymore. Very dissatisfied with the change to v3

[cryptonit]

Why are minting rewards so low? Was getting between 10 and 30 dmd on v2. Just minted 0.8. barely worth it anymore. Very dissatisfied with the change to v3

join slack and learn regarding

split coins initial with UTXO transaction

and keep coins in good size for POS competition

with console command

setstakesplitthreshold=200

u can even earn more with POS than in DMDv2

u just need to prepare the coins once then the automatic can kick in

the reward per block will static always 0.8....

but u will be able find many block so u earn same or more as with DMDv2

keep in mind now can earn again each day and not have to wait 9 days between

[jimsonunique]

Why are minting rewards so low? Was getting between 10 and 30 dmd on v2. Just minted 0.8. barely worth it anymore. Very dissatisfied with the change to v3

join slack and learn regarding

split coins initial with UTXO transaction

and keep coins in good size for POS competition

with console command

setstakesplitthreshold=200

u can even earn more with POS than in DMDv2

u just need to prepare the coins once then the automatic can kick in

the reward per block will static always 0.8....

but u will be able find many block so u earn same or more as with DMDv2

keep in mind now can earn again each day and not have to wait 9 days between

Split 200. I have 400dmd will that be 2 piles of 200 then? Or should I split into more based on how many dmd I hold

[temp89]

u can even earn more with POS than in DMDv2

Yes, but only on the condition that you open the wallet 24/7. Before there were enough 3-4 days in month.

[jimsonunique]

Setstakesplitthreshold=200 gives error method not found

[temp89]

Setstakesplitthreshold=200 gives error method not found

Try:

Code:

setstakesplitthreshold 200

[onyatchi1]

I appreciate all the kind people.
That problem was solved.

kind people=shveicar ,BogdanCo ,Heavyiron

Please contact me if you cooperated with my problem.
I will give you a tip.
Please paste the DMD's address in the mail.

[NoxX]

u can even earn more with POS than in DMDv2

Yes, but only on the condition that you open the wallet 24/7. Before there were enough 3-4 days in month.

That's why I believe it is important to get an "official" version of the RasPi wallet, I don't want to let my PC run 24/7, but one or a few RasPi is perfectly fine for me.

I know dbradford is compiling 0.13 for RasPi at the moment, and I will test that, but I would feel better if the dev team could confirm that the wallet is safe.

[shveicar]

I appreciate all the kind people.
That problem was solved.

kind people=shveicar ,BogdanCo ,Heavyiron

Please contact me if you cooperated with my problem.
I will give you a tip.
Please paste the DMD's address in the mail.

You can join our #Slack channel and quickly resolve all issues if they arise.

[Flep182]

I've upgraded to the new wallet, but now when closing I get an error:

2017-09-21 12:22:14 PrepareShutdown: In progress...
2017-09-21 12:22:14 StopNode()
2017-09-21 12:22:14 Verifying mncache.dat format...
2017-09-21 12:22:14 Loaded info from mncache.dat  21ms
2017-09-21 12:22:14   Masternodes: 70, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 8, entries in Masternode list we asked for: 0, nDsqCount: 6
2017-09-21 12:22:14 Writting info to mncache.dat...
2017-09-21 12:22:14 Written info to mncache.dat  42ms
2017-09-21 12:22:14   Masternodes: 82, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 5, entries in Masternode list we asked for: 0, nDsqCount: 6
2017-09-21 12:22:14 Masternode dump finished  64ms
2017-09-21 12:22:14 Verifying budget.dat format...
2017-09-21 12:22:14 Loaded info from budget.dat  0ms
2017-09-21 12:22:14   Proposals: 0, Budgets: 0, Seen Budgets: 0, Seen Budget Votes: 0, Seen Final Budgets: 0, Seen Final Budget Votes: 0
2017-09-21 12:22:14 Writting info to budget.dat...
2017-09-21 12:22:14 Written info to budget.dat  4ms
2017-09-21 12:22:14 Budget dump finished  26ms
2017-09-21 12:22:14 Verifying mnpayments.dat format...
2017-09-21 12:22:14 Loaded info from mnpayments.dat  42ms
2017-09-21 12:22:14   Votes: 1197, Blocks: 135
2017-09-21 12:22:14 Writting info to mnpayments.dat...
2017-09-21 12:22:14 Written info to mnpayments.dat  28ms
2017-09-21 12:22:14 Budget dump finished  74ms
2017-09-21 12:22:14 *** System error while flushing: CDB : Error -30974, can't open database
2017-09-21 12:22:17 CDBEnv::EnvShutdown : Error -30974 shutting down database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2017-09-21 12:22:17 Shutdown: done

When restarting the wallet it's now catching up again quickly, but in the previous version the wallet would crash while starting up. Let's see what happens.

[Flep182]

And when trying to change the staking size (I think) I get this error:


15:32:30

setstakesplitthreshold 200


15:32:30

CDB : Error -30974, can't open database  (code -1)

[Limx Dev]

I've upgraded to the new wallet, but now when closing I get an error:

2017-09-21 12:22:14 PrepareShutdown: In progress...
2017-09-21 12:22:14 StopNode()
2017-09-21 12:22:14 Verifying mncache.dat format...
2017-09-21 12:22:14 Loaded info from mncache.dat  21ms
2017-09-21 12:22:14   Masternodes: 70, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 8, entries in Masternode list we asked for: 0, nDsqCount: 6
2017-09-21 12:22:14 Writting info to mncache.dat...
2017-09-21 12:22:14 Written info to mncache.dat  42ms
2017-09-21 12:22:14   Masternodes: 82, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 5, entries in Masternode list we asked for: 0, nDsqCount: 6
2017-09-21 12:22:14 Masternode dump finished  64ms
2017-09-21 12:22:14 Verifying budget.dat format...
2017-09-21 12:22:14 Loaded info from budget.dat  0ms
2017-09-21 12:22:14   Proposals: 0, Budgets: 0, Seen Budgets: 0, Seen Budget Votes: 0, Seen Final Budgets: 0, Seen Final Budget Votes: 0
2017-09-21 12:22:14 Writting info to budget.dat...
2017-09-21 12:22:14 Written info to budget.dat  4ms
2017-09-21 12:22:14 Budget dump finished  26ms
2017-09-21 12:22:14 Verifying mnpayments.dat format...
2017-09-21 12:22:14 Loaded info from mnpayments.dat  42ms
2017-09-21 12:22:14   Votes: 1197, Blocks: 135
2017-09-21 12:22:14 Writting info to mnpayments.dat...
2017-09-21 12:22:14 Written info to mnpayments.dat  28ms
2017-09-21 12:22:14 Budget dump finished  74ms
2017-09-21 12:22:14 *** System error while flushing: CDB : Error -30974, can't open database
2017-09-21 12:22:17 CDBEnv::EnvShutdown : Error -30974 shutting down database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2017-09-21 12:22:17 Shutdown: done

When restarting the wallet it's now catching up again quickly, but in the previous version the wallet would crash while starting up. Let's see what happens.

Please delete everything without your wallet.dat and try it again.

Kind Regards Christian CTO

[jareddav2]

I updated from ver 12 to ver 13 a bit more than 12 hours ago with no problems.  Coins showed up instantly when I typed in my password(s).  Staking is on.  All systems seem fine.

I checked the block explorer for my node using my ip address and it doesn't show up anymore.  It used to show up when I checked the node list on ver 12.  Now I look at the ver 13 node list and I'm not there.

Does that mean I'm doing something wrong?  My wallet isn't connected to the network?  Or do I just need to wait 24hrs for it to show up?

[temp89]

I've upgraded to the new wallet, but now when closing I get an error:

2017-09-21 12:22:14 PrepareShutdown: In progress...
2017-09-21 12:22:14 StopNode()
2017-09-21 12:22:14 Verifying mncache.dat format...
2017-09-21 12:22:14 Loaded info from mncache.dat  21ms
2017-09-21 12:22:14   Masternodes: 70, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 8, entries in Masternode list we asked for: 0, nDsqCount: 6
2017-09-21 12:22:14 Writting info to mncache.dat...
2017-09-21 12:22:14 Written info to mncache.dat  42ms
2017-09-21 12:22:14   Masternodes: 82, peers who asked us for Masternode list: 0, peers we asked for Masternode list: 5, entries in Masternode list we asked for: 0, nDsqCount: 6
2017-09-21 12:22:14 Masternode dump finished  64ms
2017-09-21 12:22:14 Verifying budget.dat format...
2017-09-21 12:22:14 Loaded info from budget.dat  0ms
2017-09-21 12:22:14   Proposals: 0, Budgets: 0, Seen Budgets: 0, Seen Budget Votes: 0, Seen Final Budgets: 0, Seen Final Budget Votes: 0
2017-09-21 12:22:14 Writting info to budget.dat...
2017-09-21 12:22:14 Written info to budget.dat  4ms
2017-09-21 12:22:14 Budget dump finished  26ms
2017-09-21 12:22:14 Verifying mnpayments.dat format...
2017-09-21 12:22:14 Loaded info from mnpayments.dat  42ms
2017-09-21 12:22:14   Votes: 1197, Blocks: 135
2017-09-21 12:22:14 Writting info to mnpayments.dat...
2017-09-21 12:22:14 Written info to mnpayments.dat  28ms
2017-09-21 12:22:14 Budget dump finished  74ms
2017-09-21 12:22:14 *** System error while flushing: CDB : Error -30974, can't open database
2017-09-21 12:22:17 CDBEnv::EnvShutdown : Error -30974 shutting down database environment: DB_RUNRECOVERY: Fatal error, run database recovery
2017-09-21 12:22:17 Shutdown: done

When restarting the wallet it's now catching up again quickly, but in the previous version the wallet would crash while starting up. Let's see what happens.

Please delete everything without your wallet.dat and try it again.

Kind Regards Christian CTO

Or see https://bitcointalk.org/index.php?topic=580725.msg22064406#msg22064406. I had similar problem.