[ANN][ENRG]Energycoin - Android Released - Bittrex -

[crypto4jan]

But... But... Why is there going to be a fork...?  

Devvie

The current one was not intended. The devteam wants to controll the new fork and then others can join the fork.
There are to less people connected from the beginning to this new fork and there is danger it is not a valid one.
The comming days we decide if we go on with this one or with a new fork and 80% sure we fork from block 1051199.
I keep this one in live for a few days to investigate.
For people be in this fork we provide a boodstrap.dat and maybe new wallet client but that is were we are working on.
Do not startup your wallet if you were not online after block 1051199!

Edit:
This is where we start again:

[1715201894]

1715201894

[1715201894]

1715201894

[1715201894]

1715201894

[1715201894]

1715201894

[big ears]

But... But... Why is there going to be a fork...?  

Devvie

The current one was not intended. The devteam wants to controll the new fork and then others can join the fork.
There are to less people connected from the beginning to this new fork and there is danger it is not a valid one.
The comming days we decide if we go on with this one or with a new fork and 80% sure we fork from block 1051199.
I keep this one in live for a few days to investigate.
For people be in this fork we provide a boodstrap.dat and maybe new wallet client but that is were we are working on.
Do not startup your wallet if you were not online after block 1051199!

...

I was not online after block 1051199. How long do you estimate it will be before it's safe to start up my wallet again?

[crypto4jan]

But... But... Why is there going to be a fork...?  

Devvie

The current one was not intended. The devteam wants to controll the new fork and then others can join the fork.
There are to less people connected from the beginning to this new fork and there is danger it is not a valid one.
The comming days we decide if we go on with this one or with a new fork and 80% sure we fork from block 1051199.
I keep this one in live for a few days to investigate.
For people be in this fork we provide a boodstrap.dat and maybe new wallet client but that is were we are working on.
Do not startup your wallet if you were not online after block 1051199!

...

I was not online after block 1051199. How long do you estimate it will be before it's safe to start up my wallet again?

Hi community,
We are back online with 1 node for now!

Code:

addnode=162.245.217.165

Doing the following steps:

Code:

Set up windows wallet (get the qt wallet from the OP):

1. Delete all files except wallet.dat

2. Set up EnergyCoin.conf which can be downloaded from here:
http://coinmagi.org/files/energycoin/EnergyCoin.conf

3. Download the block chain from following link: 
http://coinmagi.org/files/energycoin/Save_blockchain_EnergyCoin_block1051199_Crypto4Jan.zip

4. Delete peers.dat (are in the ZIP)

5. Run qt wallet. 

A checkpoint to check if your are on the correct fork:
Type in console getblockhash 1054525

Code:

getblockhash 1054525

0000069fe492a858cd98eb67f11137b5568dd84c0327483817b8c55a881aa8af

Save the ZIP in case we have to rollback!

Success!

[liie888coins]

Have you thought about joining Blocknet?

All options are open.
I have a small team of people helping me for developing EnergyCoin.
First step is a realable BlockChain and the one running now is maybe a candidate but rollback is also posible.
When the next steps are clear I post the plans we have for the future development of EnergyCoin.
I was also invited by james777 to join Supernet but EnergyCoinCR did not respond then.
I see EnergyCoin in the center of envirimental applications so maybe other coins like MintCoin, SolarCoin, CarbonCoin, GreenCoin and other enviriomental currencies can join "The Green eXchange" with real world application as CO2 trade, green Energy, Biomass, and much more. The big picure is in my head and I have now great help of skillfull people.

More help is welcome and if you can contribute send me PM or email.
I need a trustfull administrator for development of the website www.energycoin.pw and forum moderators there.

Have a nice day!
Jan Clement
@GEO_Jan

 So we are running a chain? I stopped my wallet when it was clear that I had gone over the last official block. So, if we are running, then how do I make sure I am on the chain I need to be?

Sync to the new blockchain first. After your block height is over 1054525, type this command at the console:

getblockhash 1054525

It should return you: 0000069fe492a858cd98eb67f11137b5568dd84c0327483817b8c55a881aa8af

If not, you are still on the wrong fork. You will need to do the steps 1 to 5 carefully again.


Remark: for those still stuck with the last official block height 1051199 and never connected to the wrong fork before, there is no need to do steps 1 and 3.

[Harcon]

I simply can not get it to use the right fork. I am guessing that I am simply having problems with the client using the new config information. I don't really know.

 

[Harcon]

 Here you go. Reward people with energy for these types of systems:

http://www.livingmachines.com/About-Living-Machine/Water-Reuse/Reuse-Explained.aspx

 Have a certain amount of energy given to those who reclaim water with this system. Reward a certain amount for every Liter/Gallon of water reclaimed and have that energycoin spendable on clean energy hardware like solar or wind.

[crypto4jan]

I simply can not get it to use the right fork. I am guessing that I am simply having problems with the client using the new config information. I don't really know.

 

If you follow the steps you get connected.


But we need more nodes!

Set up windows wallet (get the qt wallet from the OP):

1. Delete all files except wallet.dat

2. Set up EnergyCoin.conf which can be downloaded from here:
http://coinmagi.org/files/energycoin/EnergyCoin.conf

3. Download the block chain from following link:
http://coinmagi.org/files/energycoin/Save_blockchain_EnergyCoin_block1051199_Crypto4Jan.zip

4. Delete peers.dat (are in the ZIP)

5. Run qt wallet.

Sync to the new blockchain first. After your block height is over 1054525, type this command at the console:

getblockhash 1054525

It should return you: 0000069fe492a858cd98eb67f11137b5568dd84c0327483817b8c55a881aa8af

If not, you are still on the wrong fork. You will need to do the steps 1 to 5 carefully again.


Remark: for those still stuck with the last official block height 1051199 and never connected to the wrong fork before, there is no need to do steps 1 and 3.

Edit my latest checkpoint:

Code:

getblockhash 1058092

f1f6b3ccc96fd8a67091da8b5392f27319a72f9c79dc826ae29ba5751513121e

Edit2:
A few minutes later...

[devvienuis]

knip

All my minting that started date April 10th, are lost...?
Minted +17.386739
Date: 4/10/2015 13:09
Debit: 0.00 ENRG
Net amount: -651.850273 ENRG
Transaction ID: bf111bdd2241a1e6f91d3df87162feefe0b7fd4cff4ead6982ecff945e824508

For others, maybe it gives you an extra node.... energycoin.conf:

Code:

rpcuser=bitcoinrpc
rpcpassword=5oQ61mT8TRZDQC2bhpE96yULigRayRjDuqkndKsjXZW9
rpcport=22715
rpcallowip=127.0.0.1
daemon=1
server=1
addnode=162.243.248.229
addnode=212.114.59.109
addnode=178.27.246.208
addnode=77.78.22.68
addnode=178.62.243.146
addnode=63.165.243.111
addnode=202.134.168.105
addnode=96.21.146.179
addnode=137.63.71.130
addnode=79.168.31.228
addnode=178.62.243.146
addnode=94.209.33.80
addnode=59.147.38.115
addnode=137.224.252.10
addnode=162.245.217.165
addnode=104.131.162.205
addnode=104.131.5.234

[joelao95]

Energycoin community, this is Joe from magi and I am here to help the block chain. Basically the new chain grows up from a backup chain provided by Jan  (hosted in my server: http://coinmagi.org/files/energycoin/Save_blockchain_EnergyCoin_block1051199_Crypto4Jan.zip), block # 1051119. This means all your prior staking reward after block # 1051119 (old chain) is invalid. Unless dev team wants to use another chain, you're unlikely to get those coins back. All transactions before block # 105111 are valid.

To grow the new chain properly, please download the conf file from here:

http://coinmagi.org/files/energycoin/EnergyCoin.conf

The following nodes are those I have, please make sure any other nodes which contain the old chain are removed.

I suggest community uses the following nodes and any others the dev team announced.

Code:

162.245.217.165
104.131.162.205
104.131.5.234

Let me know any questions / suggestions or a guide for setting up new chain you might need.

p.s., make sure you have backed up your wallet.dat.

[crypto4jan]

Energycoin community, this is Joe from magi and I am here to help the block chain. Basically the new chain grows up from a backup chain provided by Jan  (hosted in my server: http://coinmagi.org/files/energycoin/Save_blockchain_EnergyCoin_block1051199_Crypto4Jan.zip), block # 1051119. This means all your prior staking reward after block # 1051119 (old chain) is invalid. Unless dev team wants to use another chain, you're unlikely to get those coins back. All transactions before block # 105111 are valid.

To grow the new chain properly, please download the conf file from here:

http://coinmagi.org/files/energycoin/EnergyCoin.conf

The following nodes are those I have, please make sure any other nodes which contain the old chain are removed.

I suggest community uses the following nodes and any others the dev team announced.

Code:

162.245.217.165
104.131.162.205
104.131.5.234

Let me know any questions / suggestions or a guide for setting up new chain you might need.

p.s., make sure you have backed up your wallet.dat.

Thank you very much Joe for your help!
I working also on some extra VPS nodes and when the block chain is stable I startup my PI.

I have so many things to say for my future plans for the EnergyCoin Ecosystem but now we just have to make the block chain secure.

Have a nice day!
@GEO_Jan

[crypto4jan]

A BIG thank you to Joe! Really marvelous to see such a brilliant developer willing to help out EnergyCoin. Cheers to that!

+1000

Happy staking again

[liie888coins]

knip

All my minting that started date April 10th, are lost...?
Minted +17.386739
Date: 4/10/2015 13:09
Debit: 0.00 ENRG
Net amount: -651.850273 ENRG
Transaction ID: bf111bdd2241a1e6f91d3df87162feefe0b7fd4cff4ead6982ecff945e824508

For others, maybe it gives you an extra node.... energycoin.conf:

Calm down please. This is a POS coin and your coinage will not be lost. After you sync to the new blockchain you will be able to get similar amount of POS block rewards from staking.

And your node list is misleading because many of them are not sync to the new blockchain yet. Please add only nodes published by either Jan or Joe.


Important: Everyone else please make sure you are connected to the new blockchain. Bittrex’s wallet is already on the new blockchain. That means you won’t be able to send coins to Bittrex, or your withdrawal from Bittrex will not reach your wallet if you are still on the wrong fork!

[Harcon]

ok, got everything working and now, as of a few mins ago I am stuck at this block 1059795.

 I confirmed I was on the right block and even successfully sent 2 energy to Bittrex to test. Now, Im just plane stuck. seems to have happened during a stake.

 Ok, never mind it did move forward but I may still have a situation where the blockchain stays out of sync. Again, all was fine before I staked.

[Harcon]

Ok, I figured this out and it may have settled down now to the point where it wont happen, but......

 I seem to be floating between the active ( desirable ) Blockchain and another fork of the blockchain. I watched it change at least one time and confirmed something was up when I did a hash check on a random block and found 2 results on the same block shortly after noticing that my client suddenly went out of sink by 11k blocks.

 If it should happen again, Ill see what I can do about getting a screenshot.

 Just to be clear though, as of right now Im on the right chain.

Edit: Everything seems to have settled down.I added more nodes Jan suggested above, I previously had only one "approved" node to get me started. I currently should be acting as a node.

[crypto4jan]

Ok, I figured this out and it may have settled down now to the point where it wont happen, but......

 I seem to be floating between the active ( desirable ) Blockchain and another fork of the blockchain. I watched it change at least one time and confirmed something was up when I did a hash check on a random block and found 2 results on the same block shortly after noticing that my client suddenly went out of sink by 11k blocks.

 If it should happen again, Ill see what I can do about getting a screenshot.

 Just to be clear though, as of right now Im on the right chain.

Edit: Everything seems to have settled down.I added more nodes Jan suggested above, I previously had only one "approved" node to get me started. I currently should be acting as a node.

Welcome back to the right chain.
I hope to anounce more trusted nodes today when I have verification of the team members.
I got great help to startup again the block chain.
In a few days block chain is more secure than ever with lot of VPS nodes running.

With me as the new lead developer I hope I can create more value for EnergyCoin.
For me it is more valuable then ever and I hope we get the reward with new suporters and real life application for the EnergyCoin Ecosystem I have in mind. The comming period I work on how the roadmap looks like.
If more people want to help PM me.

[kawa900jc]

I have 7 connections with the conf from Joe:
http://coinmagi.org/files/energycoin/EnergyCoin.conf
Great!

[iGotSpots]

Do you guys want Cloud Staking? As in.. if I set it up, will you actually sign up? I don't want to waste time setting something up for nobody to use like what happened with HYP

[crypto4jan]

Do you guys want Cloud Staking? As in.. if I set it up, will you actually sign up? I don't want to waste time setting something up for nobody to use like what happened with HYP

Nice offer iGot!
I shall discuss with dev-team!
And ask you detail for the costs.

[crypto4jan]

   

EnergyCoin About EnergyCoin is a proof of work and proof of stake hybrid. Proof of Work doesn't pay out any coins although. So it's only a Proof of stake coin. EnergyCoin is a energy saving currency by it's nature and we also have plans to help people working in renewable energy sources. EnergyCoin wallets are currently available for Windows (Xp, Vista, 7 and 8 ), Linux, Mac devices. You can start accept EnergyCoin today on your website and business. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• EnergyCoin Specifications Algorithm: Scrypt POS/PoW Hybrid (No PoW Reward) Max Coins: 110 Million and yearly interests. Year 1: 10% interest Year 2: 8% Year 3: 6% Year 4: 4% Year 5: 2% Next : 1% Block Time: 30 seconds Confirmations: 3 to confirm tx Stake age: minimum 1 day to stake coins Premine: 100% given away to bitcointalk members. 40 shares held by EnergyCoin Devs, 20 to be donated soon. EnergyCoin Exchanges • MintPal - ENRG/BTC • Bittrex - ENRG/BTC • Palth - ENRG/BTC EnergyCoin Conf Code: Ports: P2P: 22706 RPC: 22705 addnode=212.114.59.109 addnode=162.243.248.229

EnergyCoin Downloads Android APK Download | Playstore | Version 1 (V1.2 is not a mandatory update) Windows - Added FasterStart, txFix, BugFixes (needs redownload blockchain) | Version 1.2 RaspberryPI - Added FasterStart, txFix, BugFixes (needs new blockchain) | Version 1.2 Linux - Added FasterStart, BugFixes (needs redownload blockchain) | Version 1.2 Windows - Coin Control Features added | Version 1.1.2 Windows | Version 1.1.2 Linux | Raspberry PI | Version 1.1.2 Source | Github EnergyCoin MacOSx | Version 1.1.2 •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• EnergyCoin News and Media AtlCoinAuthority CoinTelegraph Bitbillions CryptoArticles EnergyCoin Video Energycoin Animated Logo Hydro mining shares! Start mining energycoin! HydroENRG MultiPool shares are here. Currently we have 1,000 shares each one cost 50 NXT coins. ENRGSHARES ID : 4957314941548322778 First you need to purchase NXT coins from Bter.com or Cryptsy.com Then Download the NXT wallet: http://nxtra.org/nxt-wallet/ Add the Asset ID: 4957314941548322778 Buy your shares. Or go to NXTBlocks.info Deposit NXT Buy EnergyShares Earn a lot of ENRG and watch how ENRG grows in value EnergyCoin Charts and Ranking • WorldCoinIndex • CoinMarketCap • BitInfoCharts • CryptoCoinRank • Crypto Coin Charts - ENRG/BTC EnergyCoin Translations • French • Russian • German • Chinese • Spanish • Turkish EnergyCoin Giveaways • CryptoCoinTalk - Giveaway • AltcoinGiveAways - Giveaway 2 Block Explorers, facuets. • Block Explorer - Energy Coin Block Explorer • Faucet - GetCoin2 • Rich List - EnergyCoin.pw Games • Rock, Paper Scissor - CryptoArrow • Energy Dice - GameofDice •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• EnergyCoin Progress Updates. We're actively working on adding one new feature to wallet. Hydromining energycoin shares are available on NXT AE under EnergyShares. 50 NXT equal to 1 mining share.

EnergyCoin eco-green node deployment project on Raspberry PI

Here's how to get the 10K ENRG tip:

1. Take a fresh image for your raspi, like raspbian or other light linux and write it on your SD card.
Help to prepare SD card: http://elinux.org/RPi_Easy_SD_Card_Setup
RASPBIAN sources and others: http://www.raspberrypi.org/downloads/

Go to https://github.com/energycoin/energycoin/releases and download ARM 1.1.2 build EnergyCoin-1.1.2-arm.tar.gz (you will also find the sources to build on your own if you want)
In order to run this version under Raspberry Pi you should install dependencies using following commands in terminal:
•   sudo apt-get update
•   sudo apt-get install libboost-system1.49 libboost-filesystem1.49 libboost-thread1.49 libboost-program-options1.49 libqt4-gui libqt4-network libdb5.1++ libminiupnpc-dev
•   tar xvf EnergyCoin-1.1.2-arm.tar.gz
•   ./energycoin-qt

On your internet box or router, forward port TCP 22706 to your raspberry (allow your PI to be a full node, distribute blockchain and connect to 9 nodes or more)


2. Post in this thread with a photo of your Pi, and also a photo of your Pi screen.
The following should be visible in the photo of your Pi's screen:
A: A window showing your Raspberry Pi serial number
(using “cat /proc/cpuinfo” in terminal)
Help here: http://raspberrypi.stackexchange.com/questions/2086/how-do-i-get-the-serial-number

B: The EnergyCoin-QT wallet with the green checkmark in the lower right hand corner indicating that the RPi is now a currently synced node or the "getblockcount" command in the debug window.
C: The EnergyCoin-QT debug window open showing the command "getconnectioncount" having been typed in at the bottom and the window showing 9 or more connections.

3. Send a PM to crypto4jan with your EnergyCoin address so he can send you the 10K tip

If you follow the above instructions correctly, you will receive your tip! A big thank you to crypto4jan for donating the first 250K ENRG that will be used for tipping.

Android Wallet Released

EnergyCoin Android Wallet v1.0 Features:
-Send EnergyCoins to email
-Send EnergyCoins to EnergyCoin address
-Receive EnergyCoins
-Barcode Scanner
-Receive POS interest on individual wallet address
-Create multiple wallet addresses
-List of transactions
-Save address from Transaction list
-Contact List

Download:

APK
http://energycoin.pw/com.cryptonite.energywallet.apk

Playstore
https://play.google.com/store/apps/details?id=com.cryptonite.energywallet

I have been asked to be more transparent about the where the energycoins were spent and sent.

This is the brief file which lists most of the people that got paid. It's still incomplete and needs work.

https://docs.google.com/spreadsheet/ccc?key=0AmtTPZS-lpnjdDQyOGQ2UmRNdGhWZ3g4T0xXREh5V3c&usp=drive_web#gid=0

I will be updating it again and add more people that got stakes.

Coin was distributed in very well method. The distribution is very wide. You can see the rich list here.

http://explorer.energycoin.pw/richlist/

If anyone asked something about distribution again. Please quote them this message.

EnergyCoin: Save Energy, Save Environment, Donate, Help

Get Energycoin Verified!

Hi Community,

I'm not the new developer of EnergyCoin but I call it Manager of Operations.

First thing after we have secure the BlockChain is a new OP en this post contains the complete old OP as backup.

It takes some time to organise all the tinks around EnergyCoin, I do this in my private time.
I can use support from people for website, forum and other skills.
You can earn some ENRG for your tasks and together we create value for EnergyCoin.

Lets make EnergyCoin valuable cryptocurrency!
I have a lot of idea's for real world application and any help is welcome!

With kind regards,
Jan Clement
@GEO_Jan twitter

[crypto4jan]

Link to the new OP:
https://bitcointalk.org/index.php?topic=1028941.new#new