Hi
for aarons6
What i've done and works like a charm (I'm using a technobit Hex8 miner and a blade from gridseed Scrypt miner on the same raspberry/minera rig)
I tuned minera for my first miner with "local miner" option and pools for this miner.
Then for the second miner:
I make a config file in my home/minera folder
Like this:
{
"api-listen": true,
"api-allow": "W:127.0.0.1",
"log-file": "\/var\/log\/minera\/cgminerdmaxlzeus.log",
"pools": [
{
"url": "stratum+tcp:\/\/ispace.co.uk:4461",
"user": "wareck.blade",
"pass": "x"
}
]
}
Note the top of this file...
"api-allow" : "w:127.0.0.1"
This will enable function for use my second miner in minera...
(I explain it later)
Now I make an .sh file for example : go.sh
I put in all my config for start my second miner and pointing to my config file made just before...
Like this :
nano go.sh
#!/bin/bash
/usr/bin/screen -dmS cgminer-dmaxl /var/www/minera/minera-bin/cgminer-dmaxl-zeus --scrypt -c /home/minera/miner_blade.json --api-port 4029
Be carefull to change --api-port to 4029 (4028 is already used by my first miner)
save this file and change right
sudo chmod +x go.sh
lanch it :
./go.sh
now go to your minera setting and "network miner" section
put a miner name , for ip 127.0.0.1 and for miner port 4029 (like in your sh file)
save
You can now use and check your miner in minera...
and you can manage your pool
To make this working when your raspberry starting:
go to console
sudo nano /etc/rc.local
find "exit 0"
and add before this command line:
su - minera -c "/home/minera/go.sh" // go.sh is your sh file starting the second miner
exit 0
save and all working great !!!
Olivier