ekoice
|
|
May 26, 2014, 05:34:28 PM |
|
I get 3.5MH/s with Gigabyte R9 280x How much DRK I get a day at 10,50MH/s? settings please ? rev.2 ?
|
|
|
|
djds
|
|
May 26, 2014, 05:37:59 PM |
|
I get 3.5MH/s with Gigabyte R9 280x How much DRK I get a day at 10,50MH/s? 1.5 DRK per day
|
|
|
|
kocur
Full Member
Offline
Activity: 140
Merit: 100
We're not in Wonderland anymore Alice
|
|
May 26, 2014, 05:39:26 PM |
|
I'm getting a lot of some weird errors, though 280x is doing 3.2Mh/s... downloaded binary from page 13... What are these "No such host is known" ? https://bitcointalk.org/index.php?topic=623409.msg6948333#msg6948333
|
Community Coin: Fair & Free Distribution
|
|
|
nomoco
Newbie
Offline
Activity: 26
Merit: 0
|
|
May 26, 2014, 05:41:58 PM |
|
which driver and can you post your settings? My settings: "intensity" : "19,19", "worksize" : "128", "lookup-gap" : "2", "gpu-threads" : "4", "thread-concurrency" : "20400", "shaders" : "2560", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod" clocks 1080/1300 GPU/Mem, Catalyst 14.4
|
|
|
|
goodluck0319
|
|
May 26, 2014, 05:49:10 PM |
|
On Windows I get 4.1 Mh/s with each of my 2 R9 290 non X, on a test run more than 6 hours. Thank you! which driver and can you post your settings? My settings: "intensity" : "19,19", "worksize" : "128", "lookup-gap" : "2", "gpu-threads" : "4", "thread-concurrency" : "20400", "shaders" : "2560", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod" clocks 1080/1300 GPU/Mem, Catalyst 14.4 which miner do u use?
|
|
|
|
nomoco
Newbie
Offline
Activity: 26
Merit: 0
|
|
May 26, 2014, 05:53:14 PM |
|
which driver and can you post your settings? My settings: "intensity" : "19,19", "worksize" : "128", "lookup-gap" : "2", "gpu-threads" : "4", "thread-concurrency" : "20400", "shaders" : "2560", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod" clocks 1080/1300 GPU/Mem, Catalyst 14.4 which miner do u use? Elun's version sph-sgminer_x11mod_b2 from page 13
|
|
|
|
Bojcha
|
|
May 26, 2014, 05:54:25 PM |
|
My settings:
"intensity" : "19,19", "worksize" : "128", "lookup-gap" : "2", "gpu-threads" : "4", "thread-concurrency" : "20400", "shaders" : "2560", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod"
clocks 1080/1300 GPU/Mem When you already use that TC precize number is "20480" Posted from Bitcointa.lk - #ekJUggno90PYLPe7
|
|
|
|
Pjones
Member
Offline
Activity: 70
Merit: 10
|
|
May 26, 2014, 05:58:34 PM |
|
What settings for 5870? With this settings: -k x11mod -I 15 --gpu-fan 55 --temp-cutoff 95 --gpu-engine 920 --gpu-memclock 1250 --worksize 256 -g 2 I get only 1.3 Mh/s
Pretty sure it's not optimized for the 58XX or 59XX series. I was able to get 1.5MH vs the .977MH per core on my 5970s. Windows, 13.12 drivers.
|
|
|
|
projectdimpreza
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 26, 2014, 05:59:13 PM |
|
getting HW, running 5pcs 280x toxic 8GB ram, driver 13.1 by techpowerup, win 8.1 with this settings. anyone knows how to fix this?
"intensity" : "15", "worksize" : "256", "kernel" : "x11mod", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "0", "gpu-threads" : "2", "gpu-engine" : "1150", "gpu-fan" : "85", "gpu-memclock" : "1650", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
anyone knows how to fix this?
|
|
|
|
nomoco
Newbie
Offline
Activity: 26
Merit: 0
|
|
May 26, 2014, 06:00:24 PM |
|
My settings:
"intensity" : "19,19", "worksize" : "128", "lookup-gap" : "2", "gpu-threads" : "4", "thread-concurrency" : "20400", "shaders" : "2560", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod"
clocks 1080/1300 GPU/Mem When you already use that TC precize number is "20480" Posted from Bitcointa.lk - #ekJUggno90PYLPe7Lower TC gives me more kh/s. I tested some. But if u know better, share your knowledge!
|
|
|
|
MIN3R
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 26, 2014, 06:07:46 PM |
|
getting HW, running 5pcs 280x toxic 8GB ram, driver 13.1 by techpowerup, win 8.1 with this settings. anyone knows how to fix this?
"intensity" : "15", "worksize" : "256", "kernel" : "x11mod", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "0", "gpu-threads" : "2", "gpu-engine" : "1150", "gpu-fan" : "85", "gpu-memclock" : "1650", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
anyone knows how to fix this?
I don't have a 280X... but I would say: drop worksize to 128, and gpu-memclock to 1500. I get HW errs on my 270's with really high clocks and have to reboot. If nothing else at least try dropping worksize to 128. Also I see you have shaders "0", I would either remove that or set it to the correct number of shaders
|
|
|
|
goodluck0319
|
|
May 26, 2014, 06:09:14 PM |
|
anyone know what is good settting for 270x only?
why are you using 128 instead of 256 on ur setting?
|
|
|
|
RoyalSands
|
|
May 26, 2014, 06:10:16 PM |
|
My settings:
"intensity" : "19,19", "worksize" : "128", "lookup-gap" : "2", "gpu-threads" : "4", "thread-concurrency" : "20400", "shaders" : "2560", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod"
clocks 1080/1300 GPU/Mem When you already use that TC precize number is "20480" Posted from Bitcointa.lk - #ekJUggno90PYLPe7Lower TC gives me more kh/s. I tested some. But if u know better, share your knowledge! I think he is talking about the notion some people have that TC is "suppose" to be a multiple of 64, 128 or 256, something like that...
|
|
|
|
MIN3R
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 26, 2014, 06:12:19 PM |
|
anyone know what is good settting for 270x only?
why are you using 128 instead of 256 on ur setting?
I previously posted these settings ( https://bitcointalk.org/index.php?topic=623409.msg6951903#msg6951903) on my 270 x & non-x... getting 2.2MH/s each. From tweaking settings 128 gives better hash than 256... Although my w/u is only 0.03, YMMV. Also make sure to use the updated miner for intensities over 15 from page 13
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
May 26, 2014, 06:16:54 PM |
|
mmh, if i overclock my gpu to 1140 it give me 1 HW on the first slot gpu
|
|
|
|
goodluck0319
|
|
May 26, 2014, 06:17:54 PM |
|
intensity" : "19,19,19,15", "worksize" : "128,128,128,256", "gpu-engine" : "1080,1080,1080,1200", "gpu-memclock" : "1300,13050,1300,1500", "lookup-gap" : "2", "gpu-threads" : "4,4,4,2,", "thread-concurrency" : "20400,20400,20400,6401", "shaders" : "2560,2560,2560,1280", "gpu-powertune" :"20", "expiry" : "1", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "queue" : "0", "scan-time" : "1", "kernel" : "x11mod"
}
this is what I get so far.
3 x 290 non x and 1 x 270x
I cannot use xintensity. I have to use intensity only. please help me to check it out.
ty
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
May 26, 2014, 06:20:15 PM |
|
I get 3.5MH/s with Gigabyte R9 280x How much DRK I get a day at 10,50MH/s? which settings, core/temp?
|
|
|
|
projectdimpreza
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 26, 2014, 06:20:21 PM |
|
getting HW, running 5pcs 280x toxic 8GB ram, driver 13.1 by techpowerup, win 8.1 with this settings. anyone knows how to fix this?
"intensity" : "15", "worksize" : "256", "kernel" : "x11mod", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "0", "gpu-threads" : "2", "gpu-engine" : "1150", "gpu-fan" : "85", "gpu-memclock" : "1650", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
anyone knows how to fix this?
I don't have a 280X... but I would say: drop worksize to 128, and gpu-memclock to 1500. I get HW errs on my 270's with really high clocks and have to reboot. If nothing else at least try dropping worksize to 128. Also I see you have shaders "0", I would either remove that or set it to the correct number of shaders i tried what u said .. still getting HW
|
|
|
|
Eastwind
|
|
May 26, 2014, 06:28:47 PM |
|
Drop your frequency a bit, maybe 10MHz. The GPUs are stressed more than the old sgminer.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
May 26, 2014, 06:31:36 PM |
|
getting HW, running 5pcs 280x toxic 8GB ram, driver 13.1 by techpowerup, win 8.1 with this settings. anyone knows how to fix this?
"intensity" : "15", "worksize" : "256", "kernel" : "x11mod", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "0", "gpu-threads" : "2", "gpu-engine" : "1150", "gpu-fan" : "85", "gpu-memclock" : "1650", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.200", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "28", "failover-switch-delay" : "60", "gpu-dyninterval" : "7", "gpu-platform" : "0", "log" : "5", "no-pool-disable" : true, "queue" : "1", "scan-time" : "7", "tcp-keepalive" : "30", "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/local/bin" }
anyone knows how to fix this?
I don't have a 280X... but I would say: drop worksize to 128, and gpu-memclock to 1500. I get HW errs on my 270's with really high clocks and have to reboot. If nothing else at least try dropping worksize to 128. Also I see you have shaders "0", I would either remove that or set it to the correct number of shaders i tried what u said .. still getting HW i'm getting errors too with my 280x if i oc to 1140+ the core, try to lower the core to 1100, or your default but i'm getting errors only on the first slot gpu
|
|
|
|
|