[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[zeratult6]

I>15 = pay 2% fee and I=<15 not

[DarkAGeS]

Code:

git clone https://github.com/lasybear/sph-sgminer_x11mod
cd sph-sgminer_x11mod
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure
make

didn't compiled "sgminer" binary file on bamt 1.6
I see a lot sgminer-*.o and kernel/*.cl (including x11mod.cl) but I don't see "sgminer" - looks like building error?..

[Remember remember the 5th of November]

I>15 = pay 2% fee and I=<15 not

No, this was fixed in the latest version, -I can be 20 or more

[Glizlack]

Can some expert please work the new files into pimp for me and other linux novices? I tried for hours with no success. I would be very greatfull.

Thanks
Steve

[tobenary]

Can some expert please work the new files into pimp for me and other linux novices? I tried for hours with no success. I would be very greatfull.

Thanks
Steve

use pimpupdate
 

[Glizlack]

its up already then??? Woot !!

Steve

[Bojcha]

Lower TC gives me more kh/s. I tested some. But if u know better, share your knowledge!

how is it with TC 10240 ?
Posted from Bitcointa.lk - #GNI8U4ZCbxqHA3gH

[Bawb3]

Do any of these builds have the fixes for nicehash incorporated?

[Remember remember the 5th of November]

Do any of these builds have the fixes for nicehash incorporated?

Not sure. What are these fixes for?

[Amph]

I>15 = pay 2% fee and I=<15 not

No, this was fixed in the latest version, -I can be 20 or more

the last version is the one in the OP?

[DarkAGeS]

did anybody build this miner on BAMT (1.3/1.6)?

[Remember remember the 5th of November]

I>15 = pay 2% fee and I=<15 not

No, this was fixed in the latest version, -I can be 20 or more

the last version is the one in the OP?

Elun's version ,yes.

[Amph]

I>15 = pay 2% fee and I=<15 not

No, this was fixed in the latest version, -I can be 20 or more

the last version is the one in the OP?

Elun's version ,yes.

the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut

this error wasn't present in the first version, the one where you fixed that part of the code

also marucoin is removed from this build

[Remember remember the 5th of November]

I>15 = pay 2% fee and I=<15 not

No, this was fixed in the latest version, -I can be 20 or more

the last version is the one in the OP?

Elun's version ,yes.

the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut

this error wasn't present in the first version, the one where you fixed that part of the code

also marucoin is removed from this build

Speaking of marucoin I've ported x11 to x13 which should mean speed improvements.

[Amph]

I>15 = pay 2% fee and I=<15 not

No, this was fixed in the latest version, -I can be 20 or more

the last version is the one in the OP?

Elun's version ,yes.

the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut

this error wasn't present in the first version, the one where you fixed that part of the code

also marucoin is removed from this build

Speaking of marucoin I've ported x11 to x13 which should mean speed improvements.

marucoin kernel isn't in this build, you are speaking about a new version?

[da_uno]

Question:  Will this work on older gpu's?  I'm trying it out on my crappy laptop w/ an amd A6-3400M w/ AMD Radeon HD 6520G (512MB)(I know, I know, but i like to get use out of the old laptop).  I keep getting an error:

[15:50:16] Error -61: clCreateBuffer (hash_buffer), decrease TC or increase LG
[15:50:16] Failed to init GPU thread 0, disabling device 0
[15:50:16] Restarting the GPU from the menu will not fix this.

[mikk2k2]

Getting 3.2Mhs with 7970s need to upgrade to sort out the diff readings.

Bat:

Code:

-I 17 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20

Miner:

Code:

sgminer 4.1.0 - Started: [2014-05-26 20:42:36]
--------------------------------------------------------------------------------
(5s):16.26M (avg):16.25Mh/s | A:2  R:0  HW:0  WU:0.231/m
ST: 1  SS: 0  NB: 9  LW: 1351  GF: 0  RF: 0
Connected to Pool 0 (stratum) diff 0.000 as user 
Block: 2d3f442e...  Diff:5.93K  Started: [20:51:26]  Best share: 82   0
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  55.0C 2610RPM | 3.250M/3.259Mh/s | R:  0.0% HW:0 WU:0.043/m I:17
 GPU  1:  57.0C 2664RPM | 3.264M/3.280Mh/s | R:  0.0% HW:0 WU:0.056/m I:17
 GPU  2:  57.0C 2676RPM | 3.245M/3.253Mh/s | R:  2.4% HW:0 WU:0.039/m I:17
 GPU  3:  58.0C 2665RPM | 3.255M/3.261Mh/s | R:  0.0% HW:0 WU:0.046/m I:17
 GPU  4:  56.0C 2447RPM | 3.257M/3.254Mh/s | R:  0.0% HW:0 WU:0.049/m I:17
--------------------------------------------------------------------------------
[20:50:27] Stratum from Pool 0 detected new block
[20:50:33] Accepted 15a42d3a Diff 0.000/0.000 GPU 0
[20:50:33] Accepted 058da1fe Diff 0.000/0.000 GPU 3

Hope this helps somebody

[itraxe]

Has anyone tried this with PiMP?

yes its working perfect

do pmupdate or pimpupdate and choose there 13 line of x11 mod miner install

[itraxe]

Any ideas why the miner doesn't seem to load the config settings? Intensity is working but fan speed and engine clocks are wrong.

   "auto-fan": true,
    "gpu-fan": "50-90",
    "temp-cutoff": "95",
    "temp-target": "75",

    "gpu-engine": "1000",
 
    "worksize": "256",
    "intensity": "19",
    "thread-concurrency": "24000",

    "gpu-powertune": "20",

    "api-port": "4028",
    "api-listen": true,
    "api-allow": "W:127.0.0.1",
  
    "failover-only" : true,
    "no-pool-disable": true,
    "no-submit-stale" : true,

    "queue": "0",
  
    "kernel" : "x11mod",
    "kernel-path": "/usr/local/bin"

change voltage to 1.2 and it will working good

[DarkAGeS]

Has anyone tried this with BAMT?