zeratult6
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 26, 2014, 06:39:11 PM |
|
I>15 = pay 2% fee and I=<15 not
|
|
|
|
DarkAGeS
|
|
May 26, 2014, 06:46:23 PM |
|
git clone https://github.com/lasybear/sph-sgminer_x11mod cd sph-sgminer_x11mod autoreconf -i CFLAGS="-O2 -Wall -march=native" ./configure make didn't compiled "sgminer" binary file on bamt 1.6 I see a lot sgminer-*.o and kernel/*.cl (including x11mod.cl) but I don't see "sgminer" - looks like building error?..
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 26, 2014, 06:48:41 PM |
|
I>15 = pay 2% fee and I=<15 not No, this was fixed in the latest version, -I can be 20 or more
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
Glizlack
|
|
May 26, 2014, 06:55:21 PM |
|
Can some expert please work the new files into pimp for me and other linux novices? I tried for hours with no success. I would be very greatfull.
Thanks Steve
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ PRIMEDICE The Premier Bitcoin Gambling Experience @PrimeDice ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
tobenary
Newbie
Offline
Activity: 17
Merit: 0
|
|
May 26, 2014, 07:01:49 PM |
|
Can some expert please work the new files into pimp for me and other linux novices? I tried for hours with no success. I would be very greatfull.
Thanks Steve
use pimpupdate
|
|
|
|
Glizlack
|
|
May 26, 2014, 07:05:48 PM |
|
its up already then??? Woot !!
Steve
|
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ PRIMEDICE The Premier Bitcoin Gambling Experience @PrimeDice ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
|
|
|
Bojcha
|
|
May 26, 2014, 07:05:58 PM |
|
Lower TC gives me more kh/s. I tested some. But if u know better, share your knowledge! how is it with TC 10240 ? Posted from Bitcointa.lk - #GNI8U4ZCbxqHA3gH
|
|
|
|
Bawb3
Newbie
Offline
Activity: 44
Merit: 0
|
|
May 26, 2014, 07:07:17 PM |
|
Do any of these builds have the fixes for nicehash incorporated?
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 26, 2014, 07:08:14 PM |
|
Do any of these builds have the fixes for nicehash incorporated?
Not sure. What are these fixes for?
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
May 26, 2014, 07:18:53 PM |
|
I>15 = pay 2% fee and I=<15 not No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP?
|
|
|
|
DarkAGeS
|
|
May 26, 2014, 07:24:31 PM |
|
did anybody build this miner on BAMT (1.3/1.6)?
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 26, 2014, 07:24:55 PM |
|
I>15 = pay 2% fee and I=<15 not No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP? Elun's version ,yes.
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
May 26, 2014, 07:29:47 PM |
|
I>15 = pay 2% fee and I=<15 not No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP? Elun's version ,yes. the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut this error wasn't present in the first version, the one where you fixed that part of the code also marucoin is removed from this build
|
|
|
|
Remember remember the 5th of November
Legendary
Offline
Activity: 1862
Merit: 1011
Reverse engineer from time to time
|
|
May 26, 2014, 07:37:17 PM |
|
I>15 = pay 2% fee and I=<15 not No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP? Elun's version ,yes. the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut this error wasn't present in the first version, the one where you fixed that part of the code also marucoin is removed from this build Speaking of marucoin I've ported x11 to x13 which should mean speed improvements.
|
BTC:1AiCRMxgf1ptVQwx6hDuKMu4f7F27QmJC2
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
May 26, 2014, 07:50:14 PM |
|
I>15 = pay 2% fee and I=<15 not No, this was fixed in the latest version, -I can be 20 or more the last version is the one in the OP? Elun's version ,yes. the miner give me the " it stopped working" if i don't create a bat file before launching through shortcut this error wasn't present in the first version, the one where you fixed that part of the code also marucoin is removed from this build Speaking of marucoin I've ported x11 to x13 which should mean speed improvements. marucoin kernel isn't in this build, you are speaking about a new version?
|
|
|
|
da_uno
Newbie
Offline
Activity: 21
Merit: 0
|
|
May 26, 2014, 07:51:40 PM |
|
Question: Will this work on older gpu's? I'm trying it out on my crappy laptop w/ an amd A6-3400M w/ AMD Radeon HD 6520G (512MB)(I know, I know, but i like to get use out of the old laptop). I keep getting an error:
[15:50:16] Error -61: clCreateBuffer (hash_buffer), decrease TC or increase LG [15:50:16] Failed to init GPU thread 0, disabling device 0 [15:50:16] Restarting the GPU from the menu will not fix this.
|
|
|
|
mikk2k2
|
|
May 26, 2014, 07:54:47 PM |
|
Getting 3.2Mhs with 7970s need to upgrade to sort out the diff readings. Bat: -I 17 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 Miner: sgminer 4.1.0 - Started: [2014-05-26 20:42:36] -------------------------------------------------------------------------------- (5s):16.26M (avg):16.25Mh/s | A:2 R:0 HW:0 WU:0.231/m ST: 1 SS: 0 NB: 9 LW: 1351 GF: 0 RF: 0 Connected to Pool 0 (stratum) diff 0.000 as user Block: 2d3f442e... Diff:5.93K Started: [20:51:26] Best share: 82 0 -------------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 55.0C 2610RPM | 3.250M/3.259Mh/s | R: 0.0% HW:0 WU:0.043/m I:17 GPU 1: 57.0C 2664RPM | 3.264M/3.280Mh/s | R: 0.0% HW:0 WU:0.056/m I:17 GPU 2: 57.0C 2676RPM | 3.245M/3.253Mh/s | R: 2.4% HW:0 WU:0.039/m I:17 GPU 3: 58.0C 2665RPM | 3.255M/3.261Mh/s | R: 0.0% HW:0 WU:0.046/m I:17 GPU 4: 56.0C 2447RPM | 3.257M/3.254Mh/s | R: 0.0% HW:0 WU:0.049/m I:17 -------------------------------------------------------------------------------- [20:50:27] Stratum from Pool 0 detected new block [20:50:33] Accepted 15a42d3a Diff 0.000/0.000 GPU 0 [20:50:33] Accepted 058da1fe Diff 0.000/0.000 GPU 3 Hope this helps somebody
|
|
|
|
itraxe
Sr. Member
Offline
Activity: 264
Merit: 252
alt coins trader/miner.
|
|
May 26, 2014, 08:18:16 PM |
|
Has anyone tried this with PiMP?
yes its working perfect do pmupdate or pimpupdate and choose there 13 line of x11 mod miner install
|
|
|
|
itraxe
Sr. Member
Offline
Activity: 264
Merit: 252
alt coins trader/miner.
|
|
May 26, 2014, 08:18:53 PM |
|
Any ideas why the miner doesn't seem to load the config settings? Intensity is working but fan speed and engine clocks are wrong. "auto-fan": true, "gpu-fan": "50-90", "temp-cutoff": "95", "temp-target": "75",
"gpu-engine": "1000", "worksize": "256", "intensity": "19", "thread-concurrency": "24000",
"gpu-powertune": "20",
"api-port": "4028", "api-listen": true, "api-allow": "W:127.0.0.1", "failover-only" : true, "no-pool-disable": true, "no-submit-stale" : true,
"queue": "0", "kernel" : "x11mod", "kernel-path": "/usr/local/bin" change voltage to 1.2 and it will working good
|
|
|
|
DarkAGeS
|
|
May 26, 2014, 08:20:02 PM |
|
Has anyone tried this with BAMT?
|
|
|
|
|