RouletteRun
|
|
May 29, 2014, 12:25:11 AM |
|
Hey lads, running sgminer x11mod b2 build that was posted like on page 11 or 12? I don't recall I restarted my sgminer so I don't got like a screen shot to show, but here is my config 1x Sapphire 280X @ 1.175V - 1160/1500 3x Sapphire 270 @ 1.175,1.175,1.188 280X - 3.348 MH/s 270 - Each @ 2.030-2.036MH/s Total avg is about 9.449 MH/s when I saw it before I closed it out. I've tested these settings and these numbers work the best for me Windows 8.1 13.12 Official Drivers DRK fund in config { "pools" : [ { "url" : "stratum+tcp://x11p2p.com:7903", "user" : "XcqqsoYHxgF1j9zgaVQsJFd53YBLMR3Rsd", "pass" : "" } ] , "device" : "0,1,2,3", "intensity" : "20,17,17,17", "lookup-gap" : "2", "vectors" : "1,1,1,1", "thread-concurrency" : "8193,6401,6401,6401", "gpu-threads" : "2", "worksize" : "256,128,128,128", "expiry" : "1", "queue" : "0", "gpu-powertune" : "20,20,20,20", "gpu-engine" : "1160,1110,1110,1110", "gpu-memclock" : "1500,1500,1500,1500", "gpu-fan" : "80,65,65,65", "kernel" : "x11mod", "scan-time" : "1" } **Testing new clock speeds on 280X right now, above is good settings. ** When I'm mining on this config and WU/m I get, pool usually reports between 9.4MH/s - 10.7MH/s Thanks for your post, I'm getting about 2.08Mh on my 270x cards and about 3.5Mh on my 280x card using these settings, except the fan setting which I set at "0-100" for all the cards.
|
|
|
|
hero18688
|
|
May 29, 2014, 12:53:34 AM |
|
Thanks for your post, I'm getting about 2.08Mh on my 270x cards and about 3.5Mh on my 280x card using these settings, except the fan setting which I set at "0-100" for all the cards. Sapphire toxic or dual-x 280x? Posted from Bitcointa.lk - #tqnIhAEPzH52fsKM
|
|
|
|
RouletteRun
|
|
May 29, 2014, 01:15:48 AM |
|
Thanks for your post, I'm getting about 2.08Mh on my 270x cards and about 3.5Mh on my 280x card using these settings, except the fan setting which I set at "0-100" for all the cards. Sapphire toxic or dual-x 280x? Posted from Bitcointa.lk - #tqnIhAEPzH52fsKMNeither, MSi 280x Gaming, six PowerColor 270x Devil, one Sapphire 270x Dual X
|
|
|
|
ellave
|
|
May 29, 2014, 01:16:36 AM |
|
This showing improvements for X13? What you guys getting with a 280x?
|
|
|
|
CryptoSEO
|
|
May 29, 2014, 01:36:15 AM |
|
went from 8.8 to 13.48 using 4 - 280x and x11 mod less power efficient but the hash increase is simply a thing of beauty!
|
WC - WU6UWL8mjj1TMjzzT7CnEL2GDcP1nUsLc3
|
|
|
ellave
|
|
May 29, 2014, 01:37:49 AM |
|
This showing improvements for X13? What you guys getting with a 280x?
To answer my own question I went from 1.45 to 1.87
|
|
|
|
Elun
Member
Offline
Activity: 117
Merit: 10
|
|
May 29, 2014, 01:43:47 AM |
|
Does the binary include the fix needed to mine with NiceHash.com? Is the idlebug fixed? Thanks
bump You mean sick extended time? Yes, sick time is extended. This showing improvements for X13? What you guys getting with a 280x?
To answer my own question I went from 1.45 to 1.87 Check your configuration. I got 2.7 with R9280X-DC2T-3GD5 here: https://bitcointalk.org/index.php?topic=623409.msg6990258#msg6990258
|
|
|
|
ellave
|
|
May 29, 2014, 01:47:06 AM |
|
Does the binary include the fix needed to mine with NiceHash.com? Is the idlebug fixed? Thanks
bump You mean sick extended time? Yes, sick time is extended. This showing improvements for X13? What you guys getting with a 280x?
To answer my own question I went from 1.45 to 1.87 Check your configuration. I got 2.7 with R9280X-DC2T-3GD5 here: https://bitcointalk.org/index.php?topic=623409.msg6990258#msg6990258I have the same card, now at 2.5 with I=16, HW errors at i-18. Just to confirm I am talking about x13 algo
|
|
|
|
xIIImaL
Legendary
Offline
Activity: 1372
Merit: 1005
|
|
May 29, 2014, 02:00:34 AM |
|
5800,6900 series cards dont work with x13mod...shame.. only hw errors and no accepted shares.. so sad..
|
|
|
|
Elun
Member
Offline
Activity: 117
Merit: 10
|
|
May 29, 2014, 02:18:47 AM |
|
I have the same card, now at 2.5 with I=16, HW errors at i-18.
Just to confirm I am talking about x13 algo
Yes, x13. Hmm. Ok. May it depends from other hardware: I have 2 videocards o my PC: 5770(working + games) and R9 280(mining) and 32Gb RAM. Maybe this mod requires more system memory. How much do you have? Or maybe it's just hardware luck variance. My vga bios version: 015.041.000.000.000000(113-AD47800-101)
|
|
|
|
Wolf_Pack
|
|
May 29, 2014, 02:29:03 AM |
|
Is anyone using xintensity instead of intensity? I can get 512 to work well with my 270, but I can't find a sweet spot for my 280x.
|
|
|
|
skefa
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 29, 2014, 02:30:57 AM |
|
This showing improvements for X13? What you guys getting with a 280x?
using x13mod with my 270 (non-x) i get 1.55 per card
|
|
|
|
SpeedDemon13
|
|
May 29, 2014, 03:00:03 AM |
|
5800,6900 series cards dont work with x13mod...shame.. only hw errors and no accepted shares.. so sad.. Seems like the x13mod is optimized for GCN cards and not the VLIW cards. Had to use the regular marucoin kernel to mine.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
lasybear (OP)
Member
Offline
Activity: 113
Merit: 14
|
|
May 29, 2014, 03:17:02 AM |
|
If anybody help me to resolve issue with 5xxx/6xxx cards? Please start miner with sgminer -c <your conf file> -D -T > output.log after 10-15 sec press Ctrl+C and send me created file output.log to PM.
|
|
|
|
cooman
Newbie
Offline
Activity: 8
Merit: 0
|
|
May 29, 2014, 03:59:25 AM |
|
My cards are HD5750,some HW error and no Accepted. PM you output.log,Thanks!
|
|
|
|
drmavis
Member
Offline
Activity: 69
Merit: 10
|
|
May 29, 2014, 05:00:32 AM |
|
Has anybody had any luck with this software with the new Catalyst 14.6 beta drivers?
I just gave it a try and was initially very excited because I was getting hash rate of 4 MH/s on my 280X. Then I noticed that I was getting lots of HW hardware errors, which I had none before. No matter how much I lower the intensity (tried 11) I still get lots of HW errors. I then tried deleting the new x11modTahitiglg2tc8192w128I4.bin and restoring the old .bin file (from Catalyst 14.4) and now I get no HW errors but my hash rate isn't quite as good as it was previously.
Why would the new Catalyst drivers change the OpenCL compiling so dramatically to cause hardware errors?
|
|
|
|
MrBlacky
Newbie
Offline
Activity: 41
Merit: 0
|
|
May 29, 2014, 05:17:55 AM |
|
Has anybody had any luck with this software with the new Catalyst 14.6 beta drivers?
I just gave it a try and was initially very excited because I was getting hash rate of 4 MH/s on my 280X. Then I noticed that I was getting lots of HW hardware errors, which I had none before. No matter how much I lower the intensity (tried 11) I still get lots of HW errors. I then tried deleting the new x11modTahitiglg2tc8192w128I4.bin and restoring the old .bin file (from Catalyst 14.4) and now I get no HW errors but my hash rate isn't quite as good as it was previously.
Why would the new Catalyst drivers change the OpenCL compiling so dramatically to cause hardware errors?
I have 13.12 and no matter what settings I try I just keep getting HW errors with the x13mod. I haven't tried with 14.4. Regarding OpenCL in the new 14.4 drivers, this is an interesting issue: http://devgurus.amd.com/thread/168625
|
|
|
|
3ham3
|
|
May 29, 2014, 05:36:01 AM |
|
All versions\ stages of this miner are resulting in nothing but hw errors ( "invalid nonce" share rejected) for me.
Running 13.12 modded for 6-7 GPUs from one of those tech websites. 280x all settings tried.
Would be great if this miner works with 13.12, as I would like to roll out to my farm..
|
|
|
|
platinum4
|
|
May 29, 2014, 05:41:26 AM |
|
Got this working flawlessly with x13mod, and Elun's patches for uptime and idle GPU ADL.
3.15MH/s per R9 290X, should be noted that degrees temperature is in the median between scrypt and x11 (scrypt 94C - x13 86C - x11 72C) so whatever this kernel is doing it's ripping up the GPUs again. I think we're getting close to full GPU expenditure with this optimized software.
Thanks to girino to spawn such collaborative efforts amongst others here in this thread to make an ultimately better, free of donations, with failover - fast miner!
Y'all are the shit keep up the good work, for right now x13 got my lights back to flickering again.
|
|
|
|
Litecoin
|
|
May 29, 2014, 05:57:55 AM |
|
If anybody help me to resolve issue with 5xxx/6xxx cards? Please start miner with sgminer -c <your conf file> -D -T > output.log after 10-15 sec press Ctrl+C and send me created file output.log to PM.
Im using 5k series cards. All the problems went away when removed the 13.1 drivers and installed 14.4 All miners with 5k, 6k and 7 series cards are working just fine. 13.11 gave me HW errors like everything else older than 14.4 Cheers.
|
|
|
|
|