[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[yudhistira]

Sapphire R9 280 dual x
cat 13
sph-sgminer_x11mod_b2_2min_SICK
~3,3 Mhs
~68.0C
~2800 RPM
stable

config

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 21 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-60 --temp-cutoff 90 --temp-overheat 85

but i even got error message (always happen on gpu 1)





Please help me and what the function swith with S symbol on gpu R9 280, is should be on or off (i was turn it on), thanks for help

[1714784355]

1714784355

[1714784355]

1714784355

[1714784355]

1714784355

[1714784355]

1714784355

[1714784355]

1714784355

[Amph]

you don't need at all that long command line

just -g 2 -I 18 will do the trick

[EmilioMann]

Hi all

Just recently noticed this new sgminer . Iv been having a little difficulty trying to set up my 2 x gigabyte 7970 ghz edition cards with sgminer x11mod. Has any one had any success with these cards. If so which clock speeds and intensity  are you useing .

Many thanks

I get 3150 kh/s with this .conf and doing a small overclock to 1135mhz using cgwatcher.
Sorry for my English.

Code:

{
"pools" : [
	{
		"url" : "xxxxxx:xxxx",
		"user" : "xxxx.xxxx",
		"pass" : "x"
	}
]
,
"intensity" : "16",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-threads" : "2",
"gpu-powertune" : "20",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[yudhistira]

you don't need at all that long command line

just -g 2 -I 18 will do the trick

Thank's it's work 

with this -I 21 -g 2 --worksize 128 i get ~3.3 Mhs

i will give a report if my gpu 1 getting sick again

[adaseb]

Can anybody here with either an 6970 or 6990 post what voltage you are using?


I can't run my 6990 at stock voltages. The temp jumps to 105C. I had to undervolt to 1.025 and it mines as follows

Scrypt 344Khash/per gpu
X13 1050Khash/per gpu
X11 1250Khash/per gpu

[miner555]

i have Asus R9 280X DirectCU II TOP 3GB GDDR5 384Bit AMD Radeon (R9280X-DC2T-3GD5  )

dont work x13mod.  i was write -k x13mod but it say me: invalid parameter to set_kernel.   ( x11mod is nice )

anyone using Asus r9 280x on x13mod pls write how

[Ham628]

i have Asus R9 280X DirectCU II TOP 3GB GDDR5 384Bit AMD Radeon (R9280X-DC2T-3GD5  )

dont work x13mod.  i was write -k x13mod but it say me: invalid parameter to set_kernel.   ( x11mod is nice )

anyone using Asus r9 280x on x13mod pls write how

[snip image]

I have ten of the exact same card happily mining with x13mod; both -k x13mod and --kernel x13mod works.

Does the file x13mod.cl exist in your kernel subdirectory?

[miner555]

i have Asus R9 280X DirectCU II TOP 3GB GDDR5 384Bit AMD Radeon (R9280X-DC2T-3GD5  )

dont work x13mod.  i was write -k x13mod but it say me: invalid parameter to set_kernel.   ( x11mod is nice )

anyone using Asus r9 280x on x13mod pls write how

[snip image]

I have ten of the exact same card happily mining with x13mod; both -k x13mod and --kernel x13mod works.

Does the file x13mod.cl exist in your kernel subdirectory?

You're talking about this ? yes i have

[adaseb]

Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990


 GPU  2:  88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R:  0.0% HW:0 WU:0.011/m I:18
 GPU  3:  83.5C  30%    | 1.223M/1.234Mh/s | A:5 R:  0.0% HW:0 WU:0.016/m I:18


Uses only about 200 Watts UNDERVOLTED TO 1.025V



I will slowly up the voltage until I can get it stable at 1.3-1.4

Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.

[adaseb]

Sapphire R9 280 dual x
cat 13
sph-sgminer_x11mod_b2_2min_SICK
~3,3 Mhs
~68.0C
~2800 RPM
stable

config

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 21 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-60 --temp-cutoff 90 --temp-overheat 85

but i even got error message (always happen on gpu 1)





Please help me and what the function swith with S symbol on gpu R9 280, is should be on or off (i was turn it on), thanks for help

You sure you have enough RAM?

[adaseb]

For R7 260X

after days and days of testing, the best settings are

W=128, Thread=2, Engine=1100, mem= 1625

Every other setting causes windows or linux to lock up and not very fast hashing speed.

Should be around 1.1Mhash/s with X13

[adaseb]

After some tweaking!

R7 260X I managed to get it to hash close to an R9 270. 

Very good results from a card only costing $120


Threads=10
Engine=1250
Memory=1775

you should get 1.5Mhash/s

with scrypt it mined at only half the hash rate.

[alz]

Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990


 GPU  2:  88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R:  0.0% HW:0 WU:0.011/m I:18
 GPU  3:  83.5C  30%    | 1.223M/1.234Mh/s | A:5 R:  0.0% HW:0 WU:0.016/m I:18


Uses only about 200 Watts UNDERVOLTED TO 1.025V



I will slowly up the voltage until I can get it stable at 1.3-1.4

Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.

I have a 7 x 6950 (with unlocked shaders) rig and those run at 1.1-1.15v @ 900 -1375 giving 2000khs on pimp 1.5.4.


"intensity" : "16",
"worksize" : "128",
"thread-concurrency" : "8128",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1375",


I also run a 7990 rig and I can tell you thatall those dual gpu cards run very hot .

[adaseb]

Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990


 GPU  2:  88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R:  0.0% HW:0 WU:0.011/m I:18
 GPU  3:  83.5C  30%    | 1.223M/1.234Mh/s | A:5 R:  0.0% HW:0 WU:0.016/m I:18


Uses only about 200 Watts UNDERVOLTED TO 1.025V



I will slowly up the voltage until I can get it stable at 1.3-1.4

Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.

I have a 7 x 6950 (with unlocked shaders) rig and those run at 1.1-1.15v @ 900 -1375 giving 2000khs on pimp 1.5.4.


"intensity" : "16",
"worksize" : "128",
"thread-concurrency" : "8128",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1375",


I also run a 7990 rig and I can tell you thatall those dual gpu cards run very hot .

2000khs is x11 correct? Not x13 algo?

[kalr]

any chance that jackpot alg will be optiomized?

[sterob]

 I see people getting  2.5-2.6Mhash  with 7970 and i can only get 2.34 Mhash.

Is my bat correct? I am running 7970 @ 1040/700  core/mem with the below setting

sgminer -k x13mod -o stratum+tcp:// -u -p  --gpu-reorder -d 0,1,2 -I 17  -g 4 -w 128

[alz]

2000khs is x11 correct? Not x13 algo?

Yes thats right , I must have missed the fact that you were mining x13.

[GunPowder]

After last update (03 jun) my hashes droped a bit

7970
x13mod

2.49 -> 2.45 Mh per card

Just noticed

[bullus]

Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990


 GPU  2:  88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R:  0.0% HW:0 WU:0.011/m I:18
 GPU  3:  83.5C  30%    | 1.223M/1.234Mh/s | A:5 R:  0.0% HW:0 WU:0.016/m I:18


Uses only about 200 Watts UNDERVOLTED TO 1.025V



I will slowly up the voltage until I can get it stable at 1.3-1.4

Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.

I have a 7 x 6950 (with unlocked shaders) rig and those run at 1.1-1.15v @ 900 -1375 giving 2000khs on pimp 1.5.4.


"intensity" : "16",
"worksize" : "128",
"thread-concurrency" : "8128",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1375",


I also run a 7990 rig and I can tell you thatall those dual gpu cards run very hot .

I think u compare your x11 hashrates and his x13 hashrate.
I have a 6970, with x11 ~2300kh/s, x13 ~1300kh/s

[alz]

I think u compare your x11 hashrates and his x13 hashrate.
I have a 6970, with x11 ~2300kh/s, x13 ~1300kh/s

Yes , I missed the x13 part.

What  setting you running on your 6970 to get 2300khs?