ZymurBits
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 89
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 06:52:37 PM |
|
Anyone interested in 4 boards? Never overclocked or pencil modded. Were working when upgraded to S3 boards. I live in central US. PM me an offer.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 24, 2014, 07:05:32 PM |
|
Any updates on the controller ?
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 25, 2014, 04:37:42 AM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
Lumanet
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 04:52:11 AM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Can you post a photo of it please ? I can review your circuit and tell you how to bridge it.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 05:19:08 AM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Can you post a photo of it please ? I can review your circuit and tell you how to bridge it. https://www.dropbox.com/s/m2xqyp14wrsc97l/IMG_1884.JPG?dl=0This isn't the same board, but the broken trace is the one with the red wire. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
Lumanet
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 08:04:07 PM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Can you post a photo of it please ? I can review your circuit and tell you how to bridge it. https://www.dropbox.com/s/m2xqyp14wrsc97l/IMG_1884.JPG?dl=0This isn't the same board, but the broken trace is the one with the red wire. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) OK this is an easy fix. Also I recommand you solder both pins prior lifting the resistor up or get a wider flat tip and groove out the middle so you have a U shape tip to de soder it better from the board. Here is the pic you need to fix your board: https://www.dropbox.com/s/3nxstwkm4fehwm7/Photo%20Dec%2026%2C%2012%2044%2030%20PM.jpg?dl=0 I do hope you get it fixed :-) If not let me know because I do offer those resoldering with a fixed resistor too.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 10:17:17 PM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Can you post a photo of it please ? I can review your circuit and tell you how to bridge it. https://www.dropbox.com/s/m2xqyp14wrsc97l/IMG_1884.JPG?dl=0This isn't the same board, but the broken trace is the one with the red wire. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) OK this is an easy fix. Also I recommand you solder both pins prior lifting the resistor up or get a wider flat tip and groove out the middle so you have a U shape tip to de soder it better from the board. Here is the pic you need to fix your board: https://www.dropbox.com/s/3nxstwkm4fehwm7/Photo%20Dec%2026%2C%2012%2044%2030%20PM.jpg?dl=0 I do hope you get it fixed :-) If not let me know because I do offer those resoldering with a fixed resistor too. Thanks for the info, since this isn't my day-to-day job. Will you explain more in details exactly what I have to do. From what I understand, i need to relink C9 with C8, C4, then re-link R3 with C9,C8,C4 to C3 then all of them to C2 ? Thanks !
|
|
|
|
Lumanet
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 26, 2014, 10:46:29 PM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Can you post a photo of it please ? I can review your circuit and tell you how to bridge it. https://www.dropbox.com/s/m2xqyp14wrsc97l/IMG_1884.JPG?dl=0This isn't the same board, but the broken trace is the one with the red wire. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) OK this is an easy fix. Also I recommand you solder both pins prior lifting the resistor up or get a wider flat tip and groove out the middle so you have a U shape tip to de soder it better from the board. Here is the pic you need to fix your board: https://www.dropbox.com/s/3nxstwkm4fehwm7/Photo%20Dec%2026%2C%2012%2044%2030%20PM.jpg?dl=0 I do hope you get it fixed :-) If not let me know because I do offer those resoldering with a fixed resistor too. Thanks for the info, since this isn't my day-to-day job. Will you explain more in details exactly what I have to do. From what I understand, i need to relink C9 with C8, C4, then re-link R3 with C9,C8,C4 to C3 then all of them to C2 ? Thanks ! It really depands on how much you destroyed :-) The manual red marked line is the linking itself so if you only damaged a little bit on the R3 itself just run your wire to any of the other red marked point with a solder point. And you are done. C4 is perfect as a measuring point. If you use an OHM Meter you should read from C4 to all those point ~ 0 Ohm. Also instead of using a POT or POTI I do always just resolder a resistor in place which has 1% tolerance in this case I do use a 4.12 KOhm resistor. This eliminates your issue with the POT to adjust :-)
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 12:42:31 AM |
|
I made a bad manipulation and I broke one of my board. I pulled off the RIGHT trace on the board for R3 resistance. I'm trying to figure out if I can connect my wire somewhere else, if possible. Sooo if anyone have an idea, it would be awesome ! Thanks ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Can you post a photo of it please ? I can review your circuit and tell you how to bridge it. https://www.dropbox.com/s/m2xqyp14wrsc97l/IMG_1884.JPG?dl=0This isn't the same board, but the broken trace is the one with the red wire. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) OK this is an easy fix. Also I recommand you solder both pins prior lifting the resistor up or get a wider flat tip and groove out the middle so you have a U shape tip to de soder it better from the board. Here is the pic you need to fix your board: https://www.dropbox.com/s/3nxstwkm4fehwm7/Photo%20Dec%2026%2C%2012%2044%2030%20PM.jpg?dl=0 I do hope you get it fixed :-) If not let me know because I do offer those resoldering with a fixed resistor too. Thanks for the info, since this isn't my day-to-day job. Will you explain more in details exactly what I have to do. From what I understand, i need to relink C9 with C8, C4, then re-link R3 with C9,C8,C4 to C3 then all of them to C2 ? Thanks ! It really depands on how much you destroyed :-) The manual red marked line is the linking itself so if you only damaged a little bit on the R3 itself just run your wire to any of the other red marked point with a solder point. And you are done. C4 is perfect as a measuring point. If you use an OHM Meter you should read from C4 to all those point ~ 0 Ohm. Also instead of using a POT or POTI I do always just resolder a resistor in place which has 1% tolerance in this case I do use a 4.12 KOhm resistor. This eliminates your issue with the POT to adjust :-) many Thanks !!
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 12:44:44 AM |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
|
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 12:59:49 AM |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
I do NOT have that problem, but it could be due to all those units using the same device driver file. If you go to one of the units via control panel properties and find the path to the driver, then browse to the folder and create a few more folders under it (you can name them as you wish) and copy the driver into each folder. Then re-assign the drivers for your CP2102's to the different drivers in the new folders, ensuring each folder driver is assigne to only 4 devices (4 being your magic number!).
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 01:01:49 AM |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
I do NOT have that problem, but it could be due to all those units using the same device driver file. If you go to one of the units via control panel properties and find the path to the driver, then browse to the folder and create a few more folders under it (you can name them as you wish) and copy the driver into each folder. Then re-assign the drivers for your CP2102's to the different drivers in the new folders, ensuring each folder driver is assigne to only 4 devices (4 being your magic number!). switched one of the CP2102 and now it is more stable. Thanks for the tip, I will try it !
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 05:37:07 AM |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
I do NOT have that problem, but it could be due to all those units using the same device driver file. If you go to one of the units via control panel properties and find the path to the driver, then browse to the folder and create a few more folders under it (you can name them as you wish) and copy the driver into each folder. Then re-assign the drivers for your CP2102's to the different drivers in the new folders, ensuring each folder driver is assigne to only 4 devices (4 being your magic number!). Doesn't let me update it with a different file ... windows always say "Already installed with the lastest version" ...
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 06:16:59 AM Last edit: December 27, 2014, 07:29:15 AM by HerbPean |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
I do NOT have that problem, but it could be due to all those units using the same device driver file. If you go to one of the units via control panel properties and find the path to the driver, then browse to the folder and create a few more folders under it (you can name them as you wish) and copy the driver into each folder. Then re-assign the drivers for your CP2102's to the different drivers in the new folders, ensuring each folder driver is assigne to only 4 devices (4 being your magic number!). Doesn't let me update it with a different file ... windows always say "Already installed with the lastest version" ... Allright, after many error and retry. The problem might not be the driver or the cp2102. Since my command line when I set the freq "cgminer.exe --bmsc-options 115200:60 --bmsc-freq 0881 --hotplug 0 --lowmem -o stratum+tcp:" crashes at the end. I restart CGMiner after that and i found out that if i run the first command (Set freq) multiple of time, the HW are almost gone. So... mystery here but my tactic is working. HW went wayyy down except one board which throw more HW then all the others. EDIT: Giving up, can't find what the f*** is going on.
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2014, 10:24:18 AM |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
I do NOT have that problem, but it could be due to all those units using the same device driver file. If you go to one of the units via control panel properties and find the path to the driver, then browse to the folder and create a few more folders under it (you can name them as you wish) and copy the driver into each folder. Then re-assign the drivers for your CP2102's to the different drivers in the new folders, ensuring each folder driver is assigne to only 4 devices (4 being your magic number!). Doesn't let me update it with a different file ... windows always say "Already installed with the lastest version" ... Allright, after many error and retry. The problem might not be the driver or the cp2102. Since my command line when I set the freq "cgminer.exe --bmsc-options 115200:60 --bmsc-freq 0881 --hotplug 0 --lowmem -o stratum+tcp:" crashes at the end. I restart CGMiner after that and i found out that if i run the first command (Set freq) multiple of time, the HW are almost gone. So... mystery here but my tactic is working. HW went wayyy down except one board which throw more HW then all the others. EDIT: Giving up, can't find what the f*** is going on. often i find that when i start up the boards for mining, they will throw a fit with HW, but after they get warmed up, they all settle down, so start them up and let them run for 30 minutes, then reset the stats on cgminer, and see if its become better
|
node-vps.com - Tron / Masternode hosting services
|
|
|
dunny
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2014, 05:37:19 AM |
|
I've got 4 X S1 boards if anyone is interested ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2014, 10:50:15 AM |
|
Anyone else run as much as 6 CP2102 on windows ?
I'm having a very strange behaviour. Using only 4 cp2102, everything is rock stable. With 5 i'm getting a little more HW (especially on one card) and with 6 ... i always have a card that throw a ton of HW, i'm pretty sure it's NOT the card as the problem looks like to appears on a random AMU. (After a reboot)
Thanks
I do NOT have that problem, but it could be due to all those units using the same device driver file. If you go to one of the units via control panel properties and find the path to the driver, then browse to the folder and create a few more folders under it (you can name them as you wish) and copy the driver into each folder. Then re-assign the drivers for your CP2102's to the different drivers in the new folders, ensuring each folder driver is assigne to only 4 devices (4 being your magic number!). Doesn't let me update it with a different file ... windows always say "Already installed with the lastest version" ... Allright, after many error and retry. The problem might not be the driver or the cp2102. Since my command line when I set the freq "cgminer.exe --bmsc-options 115200:60 --bmsc-freq 0881 --hotplug 0 --lowmem -o stratum+tcp:" crashes at the end. I restart CGMiner after that and i found out that if i run the first command (Set freq) multiple of time, the HW are almost gone. So... mystery here but my tactic is working. HW went wayyy down except one board which throw more HW then all the others. EDIT: Giving up, can't find what the f*** is going on. often i find that when i start up the boards for mining, they will throw a fit with HW, but after they get warmed up, they all settle down, so start them up and let them run for 30 minutes, then reset the stats on cgminer, and see if its become better I got about 0.85% HW with 1.3% Reject after like 3 hours. I clearly notice way more HW then i had with four cards. Now running 8. I could stand 57.2gh/s steady, now getting 55.x on all 8 cards. not so bad after all
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 28, 2014, 09:07:08 PM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi61.tinypic.com%2Fm99kr7.jpg&t=665&c=xa8ux2_s_HwRNw) 5 antminer S1 units, cooled by a pair of Cougar 90cfm fans and running approx 460GH/430W (still working on tuning, 2 units are only running 70GH). Runs off a single CS650M ps: temps are up around 60-65C, and the hardware seems fine with that. I plan to get it in a cooler location soon though to drop temps 5-10C
|
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 04, 2015, 10:31:47 AM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi61.tinypic.com%2Fm99kr7.jpg&t=665&c=xa8ux2_s_HwRNw) 5 antminer S1 units, cooled by a pair of Cougar 90cfm fans and running approx 460GH/430W (still working on tuning, 2 units are only running 70GH). Runs off a single CS650M ps: temps are up around 60-65C, and the hardware seems fine with that. I plan to get it in a cooler location soon though to drop temps 5-10C Looks great. Can you provide more info how it is setup: What controller, interconnections etc.? I have a bunch of S1 boards after and S1/S3 upgrade and am interested in getting some use of them. Cheers
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 05, 2015, 08:35:05 AM |
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi61.tinypic.com%2Fm99kr7.jpg&t=665&c=xa8ux2_s_HwRNw) 5 antminer S1 units, cooled by a pair of Cougar 90cfm fans and running approx 460GH/430W (still working on tuning, 2 units are only running 70GH). Runs off a single CS650M ps: temps are up around 60-65C, and the hardware seems fine with that. I plan to get it in a cooler location soon though to drop temps 5-10C Looks great. Can you provide more info how it is setup: What controller, interconnections etc.? I have a bunch of S1 boards after and S1/S3 upgrade and am interested in getting some use of them. Cheers this thread provides all the info we have discussed in regard to s1 blades.. also how to control them without the controller boards from bitmaintech
|
node-vps.com - Tron / Masternode hosting services
|
|
|
|