pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 22, 2014, 11:12:09 PM |
|
update - fixed the half hashing board by scratching off the pcb mask and tinning the copper and linking 2 strings of chips with wire. pics soon!
Kudos! I await the photos..... updated. its crude but it works. since i saved this board i might try my chip theory. Can not be crude if it works ...! I wonder what could have triggered the failure that it by-passes seeing the board was hashing OK.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 01:08:55 AM Last edit: November 23, 2014, 04:03:45 AM by HerbPean |
|
So mod complete ... setup completed. CP2102 working great ... getting like 50gh/s with a blade ... but [2014-11-21 21:45:08] Accepted 0f53d094 Diff 17/16 AMU 0 [2014-11-21 21:45:08] Accepted 08e7d4ca Diff 29/16 AMU 0 [2014-11-21 21:45:08] Accepted 0474ec74 Diff 57/16 AMU 0 [2014-11-21 21:45:12] USB init, open device failed, err -12, [2014-11-21 21:45:12] You need to install a WinUSB driver for - CMR device 3:4 [2014-11-21 21:45:12] And associate - CMR device 3:4 with WinUSB using zadig [2014-11-21 21:45:12] See README.txt file included for help [2014-11-21 21:45:12] Bitmain detect (3:4) failed to initialise (incorrect device?) having this like every 5 seconds poping up. Any idea ? EDIT : Got it, it's my old BFL running on BFGMiner ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Anything I can do to make my CGminer ignore my BFL ? use --hotplug 0 then cgminer wont try to find new devices all the time regarding driver, i just tried different ones, until i found it :-p also make sure you install zadig driver for each cp2102s you have connected Yeah i use it for both cp2102 - winusb driver Thanks for --hotplug 0 ;-) So I rebooted my pc 2 times and now both card are working. I got one of the two that have some " invalid nonce - HW error" once in a while, I wonder why. I will take a look at the voltage again to see if anything is wrong
|
|
|
|
|
CHAOSiTEC
Legendary
Offline
Activity: 1358
Merit: 1002
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 02:24:04 PM |
|
im at sea at the moment, but will update as soon as i have a moment for it
|
node-vps.com - Tron / Masternode hosting services
|
|
|
idonothave
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 04:03:37 PM |
|
im at sea at the moment, but will update as soon as i have a moment for it Bloody hell, I did not know You are a sailor! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Good luck!
|
|
|
|
idonothave
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 04:07:31 PM |
|
update - fixed the half hashing board by scratching off the pcb mask and tinning the copper and linking 2 strings of chips with wire. pics soon! also it looks like we may be able to link 2 boards (or more) by desoldering the first and last chip on alternate boards. the last chip has no pin outs to another chip and has a resistor tied to pin 37 (respond input). so technically we tie chip 31 on the first board to chip 2 on the second board and it should simulate 1 board with more chips on single mode. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fscontent-b-ord.xx.fbcdn.net%2Fhphotos-xpa1%2Ft31.0-8%2F10818408_933916279953335_6918473276426243790_o.jpg&t=665&c=__EU5RGYzDRr1A) Great idea. It could work.
|
|
|
|
zziggi
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 04:39:45 PM |
|
update - fixed the half hashing board by scratching off the pcb mask and tinning the copper and linking 2 strings of chips with wire. pics soon! also it looks like we may be able to link 2 boards (or more) by desoldering the first and last chip on alternate boards. the last chip has no pin outs to another chip and has a resistor tied to pin 37 (respond input). so technically we tie chip 31 on the first board to chip 2 on the second board and it should simulate 1 board with more chips on single mode. careful with the first chip, he is the only who has quartz and clocks all other chips. I got a short circuit between the Rx Tx when i connect the board without turning off the power supply)). The board conducts heat well -soldering with hot air was difficulthttp://s016.radikal.ru/i335/1411/1e/78c40d20a55b.jpg
|
|
|
|
sobe-it
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 05:26:35 PM |
|
careful with the first chip, he is the only who has quartz and clocks all other chips. I got a short circuit between the Rx Tx when i connect the board without turning off the power supply)). The board conducts heat well -soldering with hot air was difficult![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs016.radikal.ru%2Fi335%2F1411%2F1e%2F78c40d20a55b.jpg&t=665&c=0Lu7sy7iDPwTIQ) yes i know, i have 2 boards that dont set clock so im thinking the first chip or quartz shorted because the boards have correct voltage. hence why im trying this, the test points after the first chip lead to the second so its kind of like a bypass but the first chip has to be pulled or there may be issues and the last one has no test points so the test points before the last chip will work.
|
|
|
|
zziggi
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 08:09:48 PM |
|
careful with the first chip, he is the only who has quartz and clocks all other chips. I got a short circuit between the Rx Tx when i connect the board without turning off the power supply)). The board conducts heat well -soldering with hot air was difficulthttp://s016.radikal.ru/i335/1411/1e/78c40d20a55b.jpgyes i know, i have 2 boards that dont set clock so im thinking the first chip or quartz shorted because the boards have correct voltage. hence why im trying this, the test points after the first chip lead to the second so its kind of like a bypass but the first chip has to be pulled or there may be issues and the last one has no test points so the test points before the last chip will work. Check the resistance between Tx and Rx and Tx-Gnd Rx-Gnd.If there is a short circuit - the first chip is dead and must be resoldered
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 10:11:35 PM |
|
So mod complete ... setup completed. CP2102 working great ... getting like 50gh/s with a blade ... but [2014-11-21 21:45:08] Accepted 0f53d094 Diff 17/16 AMU 0 [2014-11-21 21:45:08] Accepted 08e7d4ca Diff 29/16 AMU 0 [2014-11-21 21:45:08] Accepted 0474ec74 Diff 57/16 AMU 0 [2014-11-21 21:45:12] USB init, open device failed, err -12, [2014-11-21 21:45:12] You need to install a WinUSB driver for - CMR device 3:4 [2014-11-21 21:45:12] And associate - CMR device 3:4 with WinUSB using zadig [2014-11-21 21:45:12] See README.txt file included for help [2014-11-21 21:45:12] Bitmain detect (3:4) failed to initialise (incorrect device?) having this like every 5 seconds poping up. Any idea ? EDIT : Got it, it's my old BFL running on BFGMiner ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Anything I can do to make my CGminer ignore my BFL ? use --hotplug 0 then cgminer wont try to find new devices all the time regarding driver, i just tried different ones, until i found it :-p also make sure you install zadig driver for each cp2102s you have connected Yeah i use it for both cp2102 - winusb driver Thanks for --hotplug 0 ;-) So I rebooted my pc 2 times and now both card are working. I got one of the two that have some " invalid nonce - HW error" once in a while, I wonder why. I will take a look at the voltage again to see if anything is wrong Two boards running good since the last 12 hours. Adjusted my air flow to cooldown then down. I think they were overheating a bit. I'm waiting for some heatsink. steady 98.xx gh/s
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 23, 2014, 10:30:27 PM |
|
im at sea at the moment, but will update as soon as i have a moment for it Most of the poeple doesn't realized that we can communicate from anywhere on the world. Even on a boat!! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I don't know if you can't tell us were you are but i would like to know, just for the fun of it ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Godspeed :-)
|
|
|
|
seabass1985
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 70
Merit: 10
Think For Yourself Question Authority
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 01:25:11 AM |
|
I'm working on a way to run the S1 blades with the beagle bone black using the S2 software on the SD Card. I have the original file for the S2 straight from Bitmain. It's all the files compressed into one. I've been tinkering with this in my spare time, and am having some good success. The best thing about the S2 program is that you can have ALOT more chips in a chain than the S1 program. On that note if someone has a PCB design that could run the S1boards. I would be very interested in getting my hands on one for testing. I would have no problem paying for it. If we could figure out how to run the S2 software on it, we could run many hash boards from it. If someone is interested in any of my blabering please pm me and lets see if we can make use of all these unused S1 hash boards. LETS MAKE A FRANKIN MINER!!!
|
|
|
|
Lumanet
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 05:54:00 AM |
|
Let me know what you like for each board.
My projects requires 16 boards for a 4 U Server Unit with Raspberry PI and block cooling which I am about to start building now.
I hope some of you also do code with bfgminer since 4.10 now fully support Antminer boards :-) And I do have a few boards already as spare and also I do chip mode them all before using them so they compete with the S3's
Olaf
Lumanet Solar Energy LLC
|
|
|
|
herbiehasher
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 100
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 05:00:00 PM |
|
This may be a bit off topic, but is it possible to run 4 boards instead of 2 from the original S1 control board?
|
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 05:20:16 PM |
|
This may be a bit off topic, but is it possible to run 4 boards instead of 2 from the original S1 control board?
Yep it IS possible, and BITMAIN have said as much. However, the max is exactly that too, aka 4 boards.
|
|
|
|
herbiehasher
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 100
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 06:12:48 PM |
|
This may be a bit off topic, but is it possible to run 4 boards instead of 2 from the original S1 control board?
Yep it IS possible, and BITMAIN have said as much. However, the max is exactly that too, aka 4 boards. Wicked, I have 2 units, 1 won't let me log in via www anymore, but it's still hashing if power cycle it. Any links to this mod?
|
|
|
|
pekatete
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 06:44:50 PM |
|
This may be a bit off topic, but is it possible to run 4 boards instead of 2 from the original S1 control board?
Yep it IS possible, and BITMAIN have said as much. However, the max is exactly that too, aka 4 boards. Wicked, I have 2 units, 1 won't let me log in via www anymore, but it's still hashing if power cycle it. Any links to this mod? I have not seen any mods for this, but if you look at the S1 board circuitry, you will see the unused tx and rx lines for a basic mod. If you are not an electronics person, I'd be more inclined to shoo you on the direction of sorting out the login rather than the mod, but still, someone here may have more info on the mod.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 06:59:41 PM |
|
This may be a bit off topic, but is it possible to run 4 boards instead of 2 from the original S1 control board?
Yep it IS possible, and BITMAIN have said as much. However, the max is exactly that too, aka 4 boards. Wicked, I have 2 units, 1 won't let me log in via www anymore, but it's still hashing if power cycle it. Any links to this mod? First, make sure your trying to connect to right IP (maybe it's on the DHCP ?) Use a network sniffer to make sure you attempting to connect the right IP. If your problem is a login one, reset it and reconfigure. If the unit is still hashing it means everything is fine with the controller board / firmwave.
|
|
|
|
herbiehasher
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 100
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 07:08:18 PM |
|
I have the correct IP, the www isn't working but it's hashing. SSH won't connect either. Perhaps I'll do a factory reset. I have always had trouble with this 1 unit, it likes to go drop down to 80 from 180 sometimes. If I can log in and reboot, using the www or ssh, I'll get x's. Only way to clear that is to power off the PSU and power on again. Then I can log in, sometimes.
|
|
|
|
HerbPean
Legendary
Offline
Activity: 1638
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 08:17:54 PM |
|
I have the correct IP, the www isn't working but it's hashing. SSH won't connect either. Perhaps I'll do a factory reset. I have always had trouble with this 1 unit, it likes to go drop down to 80 from 180 sometimes. If I can log in and reboot, using the www or ssh, I'll get x's. Only way to clear that is to power off the PSU and power on again. Then I can log in, sometimes.
You might have a faulty controller board.
|
|
|
|
|