[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[toptek12]

XMRig Miner 6.22.0  is out and it works with AM i tested it with the upload custom software feature and it works great with AM .
Just a heads up sense it hasn't updated to XMRig Miner 6.22.0 yet .

[patrike]

XMRig Miner 6.22.0  is out and it works with AM i tested it with the upload custom software feature and it works great with AM .
Just a heads up sense it hasn't updated to XMRig Miner 6.22.0 yet .

The reason XmRig hasn't been updated for a while is that many users run into issues with the more recent versions. I just tested with 6.22 again now and it's still broken and reports half API output that is difficult to process. I've had similar reports for other users as well so unfortunately this is some scenario where XmRig runs fine on some systems while it's failing on other.

[toptek12]

XMRig Miner 6.22.0  is out and it works with AM i tested it with the upload custom software feature and it works great with AM .
Just a heads up sense it hasn't updated to XMRig Miner 6.22.0 yet .

The reason XmRig hasn't been updated for a while is that many users run into issues with the more recent versions. I just tested with 6.22 again now and it's still broken and reports half API output that is difficult to process. I've had similar reports for other users as well so unfortunately this is some scenario where XmRig runs fine on some systems while it's failing on other.

OK thank You for the reply. 

[joseph32]

Hey Patrik,

1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:

Command line parameters:  -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029  --no-watchdog

In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.

Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.

2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.

[patrike]

Awesome Miner version 10.1.1

 Important note
  - Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
  - Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
  - This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
 Features
  - Miner graph improved to display values based on the location of the mouse pointer
 Mining software
  - Rigel 1.19.0
  - SrbMiner-Multi 2.6.4
 Corrections
  - Correction to a scenario where the miner list wasn't displayed correctly

[patrike]

Hey Patrik,

1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:

Command line parameters:  -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029  --no-watchdog

In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.

Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.

2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.

Hello.

I will investigate point #1. For point #2, can you please upgrade to the latest version? We made a change in the new version that hopefully resolved this problem.

[joseph32]

Hey Patrik,

1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:

Command line parameters:  -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029  --no-watchdog

In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.

Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.

2) And a strange bug. In the newest AM version, if I right click on any column to open the menu, I only gets a white box with a red cross inside. No text.
The only color scheme which works is the "Blue". All others are broken. I'm on Win10 latest build, restarted everything a few times, nothing helped. Only the "Blue" scheme.

Hello.

I will investigate point #1. For point #2, can you please upgrade to the latest version? We made a change in the new version that hopefully resolved this problem.

Hey Patrik,

the menus are visible again in all schemes, thanks

[patrike]

Hey Patrik,

1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:

Command line parameters:  -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029  --no-watchdog

In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.

Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.

I noticed that the dual combinations have been reduced in more recent versions. I've pushed a definition update where Awesome Miner will list a bit fewer dual algorithms. However, there seems to be some dual combinations that are working and some that isn't.

Can you please try with EtcHash + Blake3 (Alephium) for example just to make sure the dual concept works in general?

[joseph32]

Hey Patrik,

1) I just wanted to use the Rigel Miner for dual mining, without ZIL. Any combination I tried AM just uses the single mining config instead of dual mining config:

Command line parameters:  -a fishhash -o stratum+tcp://de.ironfish.herominers.com:1145 -u xx+xx -p x --api-bind 0.0.0.0:4029  --no-watchdog

In the performance tab AM already prints the MH for Ironfish and a 0 for the second coin. In the pools tab below he prints pool 1 Herominers and pool 2 the second pool, but with a "Disabled". Maybe this helps.

Can you check that please? In the old versions 9.x it worked, I think... Always used it with ZIL, never had that problem.

I noticed that the dual combinations have been reduced in more recent versions. I've pushed a definition update where Awesome Miner will list a bit fewer dual algorithms. However, there seems to be some dual combinations that are working and some that isn't.

Can you please try with EtcHash + Blake3 (Alephium) for example just to make sure the dual concept works in general?

Hey Patrik,

I updated the definition update and already made my text. But after stop/start a few times, it works now. Every time Tested with ETC+Add and IRON+Add and on different rigs. Everything is fine.
So, if it was on my side: I'm sorry! If it was the update: Great job and thanks

[nordmann666]

is there any chance to add own API Access to miners that are not supported yet?

[patrike]

is there any chance to add own API Access to miners that are not supported yet?

Thanks for the question. This is unfortunately not supported. Please also note that ASIC miners may have their own authentication concepts, request tokens and other concepts that makes it more complex than just picking a few properties from a JSON response.

[nordmann666]

is there any chance to add own API Access to miners that are not supported yet?

Thanks for the question. This is unfortunately not supported. Please also note that ASIC miners may have their own authentication concepts, request tokens and other concepts that makes it more complex than just picking a few properties from a JSON response.

you got PM already but the FW i talk about is able to give me API token

[patrike]

Awesome Miner version 10.1.2

 Important note
  - Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
  - Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
  - This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
 Mining software
  - CpuMiner-Opt 24.5
  - Lolminer 1.90
 Corrections
  - Correction to benchmark

[toptek12]

Does AM support the AMD Ryzen 9 9950X it doesn't show power usage or temperature with any of the miners I tried but does show hash rate and coins per day. .
SO my question is , is it AM or the Miners ?.
the two I tried were SRBMine 2.6,6 and xmrig-6.22.0 with the upload tool in AM .

No Biggie if AM doesn't support the AMD Ryzen 9 9950X , just asking.

I mine mostly  Qubic now with Remote desktop thu AM.

and I also noticed it's still @ SRBMine 2.6.4 , so I'm guessing it's having the same issue xmrig is having and nothing you can do .

[patrike]

Does AM support the AMD Ryzen 9 9950X it doesn't show power usage or temperature with any of the miners I tried but does show hash rate and coins per day. .
SO my question is , is it AM or the Miners ?.
the two I tried were SRBMine 2.6,6 and xmrig-6.22.0 with the upload tool in AM .

No Biggie if AM doesn't support the AMD Ryzen 9 9950X , just asking.

I mine mostly  Qubic now with Remote desktop thu AM.

and I also noticed it's still @ SRBMine 2.6.4 , so I'm guessing it's having the same issue xmrig is having and nothing you can do .

I've not been able to verify with the Ryzen 9000-series yet so it's likely not supported yet.

I've just pushed a mining software definition update to include the latest SrbMiner-Multi and more. It's only XmRig that we keep an older version of now due to monitoring issues in XmRig itself.

[patrike]

Awesome Miner version 10.1.3

 Important note
  - Future versions of Awesome Miner and Remote Agent will no longer support Windows 7, Windows 8 and Windows 8.1. Windows 7 is no longer supported by Microsoft since January 2020. Windows 8 and 8.1 are no longer supported by Microsoft since January 2023.
  - Future versions of Awesome Miner and Remote Agent will run on Windows 10, Windows 11 and Windows Server 2012 or later. Only 64-bit editions will be supported. Remote Agent will continue to support Linux.
  - This release will still run on older versions of Windows but it's recommended to plan for an upgrade of Windows
 Awesome Miner Antminer firmware
  - Improved integration in Awesome Miner for configuration of auto switching presets
 ASIC mining
  - Improved detection of failed hash boards and failed fans on Avalon ASIC miners
  - BraiinsOS+ 1.2.0 compatibility with better support for applying pools changes
  - Initial support for Antminer L9
 Mining software
  - Lolminer 1.91
  - Nanominer 3.9.3
  - Rigel 1.19.1
  - SrbMiner-Multi 2.6.8
  - TeamBlackMiner 2.27
 Corrections
  - Correction to the ASIC Tools menu not showing correctly in the Main toolbar

[bensam1231]

Couple things that still haven't been added to AM that it could really benefit from.

A way for AM to access a basic external API and retrieve/send data to use in variables. Very important for triggers or automating work. AM has it's own API, but can't communicate with external ones.

A 'WAIT' event for Triggers in rules. This allows you to set an amount of time in which rules need to be true (or false) before it triggers. Right now there is no way to do this and it just triggers.

[patrike]

Couple things that still haven't been added to AM that it could really benefit from.

A way for AM to access a basic external API and retrieve/send data to use in variables. Very important for triggers or automating work. AM has it's own API, but can't communicate with external ones.

A 'WAIT' event for Triggers in rules. This allows you to set an amount of time in which rules need to be true (or false) before it triggers. Right now there is no way to do this and it just triggers.

Thanks for the feedback. Both requests make sense.

1) Getting data from extenal APIs typically requires some processing of the result, for example processing a JSON result set. It would be possible to do something custom with the C# scripting feature we have today.

Sending HTTP POST requests from Awesome Miner is possible via the Webhook rule action. Variables can be used here as well.

2) Good point. A workaround today would be to make use of variables that you increase like a counter or reset based on certain trigger conditions. You can then have another rule looking if the variable value is above for example 100, indicating that the conditions has been true for a period of time. Yes, it's a bit complicated but it's possible today.

[patrike]

...so I'm guessing it's having the same issue xmrig is having and nothing you can do .

The most recent XmRig version has finally resolved the API monitoring issues. It's included in the latest software definition update. Please give it a try.

[toptek12]

...so I'm guessing it's having the same issue xmrig is having and nothing you can do .

The most recent XmRig version has finally resolved the API monitoring issues. It's included in the latest software definition update. Please give it a try.

Thank you I saw that it works great .