[ANN] SpreadCoin | True Decentralization (No Pools) | Testing New Masternodes

[jjjordan]

I get around 3,700k on a 970 and 2,000 on a 280X

[binary_tree]

How much does the spreadx11 algorithm differ from the other x11 (darkcoin)?
I am getting slightly above half the speed of the other x11 (8.7Mh/s -> 4.7Mh/s)

that's same with my mining rigs,it's the normal speed ,I think.

[binary_tree]

I get around 3,700k on a 970 and 2,000 on a 280X

2,000 on a 280X ?! that's is quite faster than mine,I got 1.7Mh/s on my 280x.

[jjjordan]

I get around 3,700k on a 970 and 2,000 on a 280X

2,000 on a 280X ?! that's is quite faster than mine,I got 1.7Mh/s on my 280x.

overclocked sometimes to 1160
most are stable at 1100-1150

[E9800]

Try this. Does not work as well with Hynix. I see 2,050 per card with this config.

{
"pools" : [
   {
      "url" : "127.0.0.1:41677",
      "user" : "",
      "pass" : "",
      "algorithm" : "spreadcoin",
      "pool-priority" : "1"
   }
]
,
"xintensity" : "256,256",
"worksize" : "128,128",
"kernel" : "spreadcoin,spreadcoin",
"lookup-gap" : "2,2",
"thread-concurrency" : "12288,12288",
"shaders" : "2048,2048",
"gpu-threads" : "2",
"gpu-engine" : "1150,1150",
"gpu-fan" : "75,75",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "0,0",
"gpu-vddc" : "0.000,0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "85,85",
"temp-target" : "75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[e1ghtSpace]

Thanks for the suggestion!

Hmm... I could make the Spreadcoin logo turn into liquid and flow over a globe or something.
Would that be ok? I don't know how I would make it flow into a globe though

I was spitballin...I like your idea better than my suggestion...the only thing I would add is if it would be possible to kind of have a few of the splash points stand out so that the idea of decentralized nodes could be an implicitly represented in the graphic.

That sounds complex though...I think it would be epic without that detail.

I'll try to look into it but I might not do it. Sorry

No need to apologize...I just thought your efforts were cool and wanted to provide feedback.

What if you ignored everything I said and went with your idea?  

PM me your SPR address and I'll send you 125 SPR for the consideration (will be tomorrow/later today/timezones)...and you don't have to continue if you don't want to.  Art is worth supporting...-thumbsup-

I was pretty drunk last night and didn't see that you had an address in your signature.  Thanks for humoring my comments; 125 SPR sent...

Cheers.

Edit to Add - I sent from Trex so only 124.8 made it to your address...oops...

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

[MemoryShock]

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

No problem.

That actually sounds cool...I would be interested in seeing anything that you create...

[e1ghtSpace]

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

No problem.

That actually sounds cool...I would be interested in seeing anything that you create...

Alright. It should be ready in 6 hours. Simulating the liquid takes a lot of time and unfortunately I messed up the last simulation because a few drops of liquid landed on an invisible ledge which I didn't know existed.

[ivcelmik]

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

No problem.

That actually sounds cool...I would be interested in seeing anything that you create...

Alright. It should be ready in 6 hours. Simulating the liquid takes a lot of time and unfortunately I messed up the last simulation because a few drops of liquid landed on an invisible ledge which I didn't know existed.

hi guys need help i get only 1.8 Mh/s with an R9 280x it is normal ?

Thx in advance

[e1ghtSpace]

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

No problem.

That actually sounds cool...I would be interested in seeing anything that you create...

Alright. It should be ready in 6 hours. Simulating the liquid takes a lot of time and unfortunately I messed up the last simulation because a few drops of liquid landed on an invisible ledge which I didn't know existed.

hi guys need help i get only 1.8 Mh/s with an R9 280x it is normal ?

Thx in advance

Not sure. What level is your intensity on? I have an R9 290X and I get 2.7Mh/s with my intensity on 21.

[E9800]

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

No problem.

That actually sounds cool...I would be interested in seeing anything that you create...

Alright. It should be ready in 6 hours. Simulating the liquid takes a lot of time and unfortunately I messed up the last simulation because a few drops of liquid landed on an invisible ledge which I didn't know existed.

hi guys need help i get only 1.8 Mh/s with an R9 280x it is normal ?

Thx in advance

Go back 1 page. I posted my config for Elpida 280x. Hynix only gets 1.9 with this config.

[ivcelmik]

Oh wow! Thank you for your generous donation!

I remember when I tried to make the spreadcoin logo into liquid before some of the thin parts would be detatched. So I won't be able to do that idea.

Right now I have a floodgate opening up and glowing liquid flows out of it. It doesn't have anything to do with Spreadcoin. But if I made the fluid purple would that be considered a Spreadcoin thing because the water spreads out?

No problem.

That actually sounds cool...I would be interested in seeing anything that you create...

Alright. It should be ready in 6 hours. Simulating the liquid takes a lot of time and unfortunately I messed up the last simulation because a few drops of liquid landed on an invisible ledge which I didn't know existed.

hi guys need help i get only 1.8 Mh/s with an R9 280x it is normal ?

Thx in advance

Go back 1 page. I posted my config for Elpida 280x. Hynix only gets 1.9 with this config.

Thx man i have Elpida too

[E9800]

Dual Gigabyte 280X with Elpida Memory using my posted config.

[zmija]

Hi, does anyone know if hash rate is combined, when it's coming from different locations but, using same SPR address? thx

[jpouza]

Second block found but not added to my wallet, that's just too strange...

[e1ghtSpace]

Hi, does anyone know if hash rate is combined, when it's coming from different locations but, using same SPR address? thx

Yes, it'll be combined. It's just like pools.

Second block found but not added to my wallet, that's just too strange...

It was probably a reject. Too normal.

[sony87]

Again, anyone with R9 290 to post bin files from 14.9+ drivers system, thanks.

[girino]

Hi, does anyone know if hash rate is combined, when it's coming from different locations but, using same SPR address? thx

Yes, it'll be combined. It's just like pools.

Second block found but not added to my wallet, that's just too strange...

It was probably a reject. Too normal.

Try running "listtransactions" on the "debug console" and see if the transaction appears as "orphan". This might be the case.

[zmija]

Hi, does anyone know if hash rate is combined, when it's coming from different locations but, using same SPR address? thx

Yes, it'll be combined. It's just like pools.

Second block found but not added to my wallet, that's just too strange...

It was probably a reject. Too normal.

thx for the answer

[zeca pagodinho]

First trading officially registered in the modality Fiat / SpreadCoin.  
Image taken from the exchange C-CEX.