unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
|
September 05, 2014, 11:01:12 AM |
|
Hey guys. I have received 45k BURST so far for the multipool.
For those wondering how I lost my coin.... Well... I was using my touchscreen phone and the screen misclicked sell on an order at 300 sats. Since CCEX has no damn second confirmation... It dumped them between 450-500 sats, even after holding them from 160 to 1200 and all the way back down.
I'm very upset about it. But I will remain active in the community, at least until I can get your multipool up. I would like to buy back in, but it will be hard to get over a mil at 480ish sats...
So anyway, I would like to get the remaining 15k before letting the multipool guy go to town. I offered 5k of my own coin which I will have to buy on the exchange for now =\
Send to the address in your signature? Yes. All those funds go to the multipool. anon why you do not set something like this to increase the amount of bounty received... when multipool will be up. STANDARD MULTIPOOL FEE: 2% or something like this. FEE for MULTIPOOL DONORS: 0.5% or something like this???i think this could increase donors number!
|
|
|
|
shlsumy
Newbie
Offline
Activity: 35
Merit: 0
|
|
September 05, 2014, 11:03:23 AM |
|
I am starting to think that this coin will die on ccex. Too bad the dev hasn't upgraded the coin's coin because without that bittrex addition is a no go.
if you really concern the coin's future, please raise 3 btc by yourself to pay the bittrex if you think it is important, if can't ,then you can stop crying the bittrex, then try other platform, don't blame everything to dev, dev is only responsible for the developing of the coin, adversting is community's busniess, dev has never do something wrong until now, no primer mining, no scam, working hard , what did you expect in addition, you guys just mining and crying pump all the day, wish can pump fast and dump quickly to earn money, what did you do for the coin,? if nothing, you have no ability to blame the dev sory for my English may be we can make Fond (BURST) for bittrex registration if we want rate of our coinse raize we can give same our Burst - in future all will won from this
|
|
|
|
spoonman
Newbie
Offline
Activity: 23
Merit: 0
|
|
September 05, 2014, 11:04:14 AM |
|
Hey all, I'm trying to mine using pocminer_pool_v1 on burst-pool.cryptoport.io. Unfortunately the only messages i'm getting in the console window is: [WARN] [09/05/2014 08:41:28.316] [default-akka.actor.default-dispatcher-1852] [a kka://default/user/$a/$b] null I'm using Windows Server 2012 R2, & Java 64 bit (edit: I've just tried the 32 bit version - same result). Here's the contents of the bat file: java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocminer_pool.POCMiner mine http://127.0.0.1:8125 http://burst-pool.cryptoport.io:80 Any idea what's going on? It's been running for about 10 hours now and my 'Account Balance' is still zero. I'm not using very large plots (about 310GB so far) but i'd have expected something by now. This coin shows great promise but it seems to take that long to set everything up that I can't be sure if things are working. I bought a 2TB earlier this week and the way the difficulty is rising (and the price dropping) I'm beginning to doubt I'll see ROI. I'm not in it to sell every bit of Burst I mine, but I need to cover costs! Help! Cheers. Does anyone have any idea about the above? I've found a few references to the warning/error in topic but nothing definitive that helps. I have no idea if my PC is sitting there wasting time, or i'm just being impatient. After 12 hours and zero payout, i'm starting to suspect the former.
|
|
|
|
Matt9301
Legendary
Offline
Activity: 1638
Merit: 1009
|
|
September 05, 2014, 11:07:39 AM |
|
Hey all, I'm trying to mine using pocminer_pool_v1 on burst-pool.cryptoport.io. Unfortunately the only messages i'm getting in the console window is: [WARN] [09/05/2014 08:41:28.316] [default-akka.actor.default-dispatcher-1852] [a kka://default/user/$a/$b] null I'm using Windows Server 2012 R2, & Java 64 bit (edit: I've just tried the 32 bit version - same result). Here's the contents of the bat file: java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocminer_pool.POCMiner mine http://127.0.0.1:8125 http://burst-pool.cryptoport.io:80 Any idea what's going on? It's been running for about 10 hours now and my 'Account Balance' is still zero. I'm not using very large plots (about 310GB so far) but i'd have expected something by now. This coin shows great promise but it seems to take that long to set everything up that I can't be sure if things are working. I bought a 2TB earlier this week and the way the difficulty is rising (and the price dropping) I'm beginning to doubt I'll see ROI. I'm not in it to sell every bit of Burst I mine, but I need to cover costs! Help! Cheers. Does anyone have any idea about the above? I've found a few references to the warning/error in topic but nothing definitive that helps. I have no idea if my PC is sitting there wasting time, or i'm just being impatient. After 12 hours and zero payout, i'm starting to suspect the former. You must use their miner.. You can download it here http://burst-pool.cryptoport.io/howto.html
|
|
|
|
unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
|
September 05, 2014, 11:08:28 AM |
|
any news on porting dcct' miner to windows? Windows users are getting out of game Ported. Testing... (there are some problems with the stability) +add reading passphrases.txt waiting for it, the plotter also(the new version) i think plotter for Winzoz takes precedence!!!!
|
|
|
|
unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
|
September 05, 2014, 11:18:05 AM |
|
If anyone wants to sell off a good amount of BURST between 450-500, let me know and you can put an order up for me to buy, it will help us all.
we are on support zone! https://www.dropbox.com/s/ro7a9l9ti6oqpt5/burst_chart1.PNG?dl=0really red zone for burst!
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
September 05, 2014, 11:18:22 AM |
|
here there isn't the excuse
"they need to pay electricity" lmao, therefore they are just dumping
|
|
|
|
cptfisher
|
|
September 05, 2014, 11:19:55 AM |
|
hello i was mining in pool burst-pool.cryptoport.io with the dcctminer downloaded from their site while the plot were generating. now that i got my plots ready i want to go in solo but using the pocminer im getting this error when submitting share
{"result":"Passphrase does not match reward recipient"}
the plots are in the /plots/ path of the pocminer folder already
any hints?
|
|
|
|
unsoindovo
Legendary
Offline
Activity: 1932
Merit: 1042
https://locktrip.com/?refId=40964
|
|
September 05, 2014, 11:21:25 AM |
|
anon why you do not set something like this to increase the amount of bounty received... when multipool will be up.
STANDARD MULTIPOOL FEE: 2% or something like this. FEE for MULTIPOOL DONORS: 0.5% or something like this???
i think this could increase donors number!
|
|
|
|
mellorbo
|
|
September 05, 2014, 11:23:40 AM Last edit: September 05, 2014, 11:37:06 AM by mellorbo |
|
hey guys ive been mining here http://burst-pool.cryptoport.io/ i have been using the pools miner and received one payment when i started. left it over night but not received any further payments. any ideas? EDIT: just received payment now so all is good
|
|
|
|
spoonman
Newbie
Offline
Activity: 23
Merit: 0
|
|
September 05, 2014, 11:32:45 AM |
|
Hey all, I'm trying to mine using pocminer_pool_v1 on burst-pool.cryptoport.io. Unfortunately the only messages i'm getting in the console window is: [WARN] [09/05/2014 08:41:28.316] [default-akka.actor.default-dispatcher-1852] [a kka://default/user/$a/$b] null I'm using Windows Server 2012 R2, & Java 64 bit (edit: I've just tried the 32 bit version - same result). Here's the contents of the bat file: java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocminer_pool.POCMiner mine http://127.0.0.1:8125 http://burst-pool.cryptoport.io:80 Any idea what's going on? It's been running for about 10 hours now and my 'Account Balance' is still zero. I'm not using very large plots (about 310GB so far) but i'd have expected something by now. This coin shows great promise but it seems to take that long to set everything up that I can't be sure if things are working. I bought a 2TB earlier this week and the way the difficulty is rising (and the price dropping) I'm beginning to doubt I'll see ROI. I'm not in it to sell every bit of Burst I mine, but I need to cover costs! Help! Cheers. Does anyone have any idea about the above? I've found a few references to the warning/error in topic but nothing definitive that helps. I have no idea if my PC is sitting there wasting time, or i'm just being impatient. After 12 hours and zero payout, i'm starting to suspect the former. You must use their miner.. You can download it here http://burst-pool.cryptoport.io/howto.htmlThat has worked and you are awesome. Thank you.
|
|
|
|
vitvert
|
|
September 05, 2014, 11:33:28 AM |
|
Hello People's, advise me... If I had a 3x3 TB, what generate numbers should I use? a single plot for each disk? total 3 plott's for 2.6 terabytes. or 13 plott's on each disk? a total of 39 plott's 200 gigabytes. ---- my pc: core i5 (4-core), 8 gb ram eg, run-generate file for first HDD (3 TB): ==== "%PROGRAMFILES%\Java\jre7\bin\java.exe" -Xmx6144m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate my_burst_wallet 0 819100 6144 3 ...... generate my_burst_wallet 819100 819100 6144 3 ...... 9829209 819100 6144 3 ==== run-generate file for second HDD (3 TB): ...... 10648310 819100 6144 3 ...... 11467411 819100 6144 3 ...... 20477522 819100 6144 3 etc...
or a single plot for each disk? total 3 plott's for 2.6 terabytes ?
|
|
|
|
AnonymousEconomist
Full Member
Offline
Activity: 154
Merit: 100
Add me on Twitter! @AnonOnAMoose
|
|
September 05, 2014, 11:36:41 AM |
|
anon why you do not set something like this to increase the amount of bounty received... when multipool will be up.
STANDARD MULTIPOOL FEE: 2% or something like this. FEE for MULTIPOOL DONORS: 0.5% or something like this???
i think this could increase donors number!
I will take this into consideration, however, my priority is the coin. If too high a percentage is implemented, (and I believe 2% is too high) then people wont want to mine on it. We want our community to mine BURST's multipool with confidence, and attract people to it.
|
Add me on Twitter! @AnonOnAMoose
|
|
|
Matt9301
Legendary
Offline
Activity: 1638
Merit: 1009
|
|
September 05, 2014, 11:41:48 AM |
|
Hey all, I'm trying to mine using pocminer_pool_v1 on burst-pool.cryptoport.io. Unfortunately the only messages i'm getting in the console window is: [WARN] [09/05/2014 08:41:28.316] [default-akka.actor.default-dispatcher-1852] [a kka://default/user/$a/$b] null I'm using Windows Server 2012 R2, & Java 64 bit (edit: I've just tried the 32 bit version - same result). Here's the contents of the bat file: java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocminer_pool.POCMiner mine http://127.0.0.1:8125 http://burst-pool.cryptoport.io:80 Any idea what's going on? It's been running for about 10 hours now and my 'Account Balance' is still zero. I'm not using very large plots (about 310GB so far) but i'd have expected something by now. This coin shows great promise but it seems to take that long to set everything up that I can't be sure if things are working. I bought a 2TB earlier this week and the way the difficulty is rising (and the price dropping) I'm beginning to doubt I'll see ROI. I'm not in it to sell every bit of Burst I mine, but I need to cover costs! Help! Cheers. Does anyone have any idea about the above? I've found a few references to the warning/error in topic but nothing definitive that helps. I have no idea if my PC is sitting there wasting time, or i'm just being impatient. After 12 hours and zero payout, i'm starting to suspect the former. You must use their miner.. You can download it here http://burst-pool.cryptoport.io/howto.htmlThat has worked and you are awesome. Thank you. I'm glad to have helped you!
|
|
|
|
alphateam
|
|
September 05, 2014, 11:43:01 AM |
|
what is wrong with v2 pool(unofficial) ? i try to mine there, i mining for like 12 hours now and still i dont have single payment...also i saw my adress on page but id disapear after few hours Same for me, last payment 10hour ago... minimum payout now is 250 BURST to reduce tx cost, i checked that ur address has balance of 123.9 BURST see rightmost column on current round shares Ok thanks uray
|
|
|
|
mellorbo
|
|
September 05, 2014, 11:51:50 AM |
|
hey guys if i want to add another hdd to mine can i just copy over the plots from my first hdd and carry on mining (both same size hdd) or do i need to plot again? also can i use the same address on multiple hdd or just one?
|
|
|
|
alphateam
|
|
September 05, 2014, 11:56:07 AM |
|
hey guys if i want to add another hdd to mine can i just copy over the plots from my first hdd and carry on mining (both same size hdd) or do i need to plot again? also can i use the same address on multiple hdd or just one?
You need to plot again if you want to mine simultaneously You can have the same adresse for multiple hdd this is not a problem, it's even better (for me)
|
|
|
|
guntherp
Newbie
Offline
Activity: 35
Merit: 0
|
|
September 05, 2014, 11:57:30 AM |
|
OK. I have a few questions... First of all, I need to say that this coin is the first coin that I am mining in like 5 months. When Asic killed my scrypt rig, I turned my back completely. In those months a lot seems to have happened, so you'll have to excuse me if I ask stupid questions. 1. Is this the first coin based on disk capacity? 2. Is this something that is going to stay? (I don't mean this coin. I mean mining on disk capacity.) 3. Is it worth investing in more disk capacity? 4. If so, how do you guys solve the slow plotting? I am doing like 25-30Gb/h. I had 12TB free on a nas. To fill that it will take 3 weeks Can I use multiple PCs to plot the files and use them in 1 miner after that? If yes, what do I need to pay attention to? Same address and different plot start-stop range? Anything else? Thanks in advance.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
September 05, 2014, 12:07:51 PM |
|
Hello People's, advise me... If I had a 3x3 TB, what generate numbers should I use? a single plot for each disk? total 3 plott's for 2.6 terabytes. or 13 plott's on each disk? a total of 39 plott's 200 gigabytes. ---- my pc: core i5 (4-core), 8 gb ram eg, run-generate file for first HDD (3 TB): ==== "%PROGRAMFILES%\Java\jre7\bin\java.exe" -Xmx6144m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate my_burst_wallet 0 819100 6144 3 ...... generate my_burst_wallet 819100 819100 6144 3 ...... 9829209 819100 6144 3 ==== run-generate file for second HDD (3 TB): ...... 10648310 819100 6144 3 ...... 11467411 819100 6144 3 ...... 20477522 819100 6144 3 etc...
or a single plot for each disk? total 3 plott's for 2.6 terabytes ? for 3TB you can do 2720/4 = 4 plot of 680 giga each
|
|
|
|
fanepatent
|
|
September 05, 2014, 12:08:12 PM |
|
OK. I have a few questions... First of all, I need to say that this coin is the first coin that I am mining in like 5 months. When Asic killed my scrypt rig, I turned my back completely. In those months a lot seems to have happened, so you'll have to excuse me if I ask stupid questions. 1. Is this the first coin based on disk capacity? 2. Is this something that is going to stay? (I don't mean this coin. I mean mining on disk capacity.) 3. Is it worth investing in more disk capacity? 4. If so, how do you guys solve the slow plotting? I am doing like 25-30Gb/h. I had 12TB free on a nas. To fill that it will take 3 weeks Can I use multiple PCs to plot the files and use them in 1 miner after that? If yes, what do I need to pay attention to? Same address and different plot start-stop range? Anything else? Thanks in advance. Welcome back I also sold my scrypt rig at the beggining of the year, and since than been absent on the crypto stage. 1. This is the first one. 2. As with the scrypt and sha based coins, many will follow. So its safe to say yes. 3. Considering the growth it has experienced in the last 2 days, its still worth. Also taking in consideration that service costs are cut to the minimum. 4. Slow plotting... Depends on your CPU. I for one have an i7 with 24 Gb of ram, so its going fairly good. You can use the NAT and yes, you can use multiple computers to plot, as long as you don't overlap the nonces.
|
BURST - BURST-58XP-63WY-XSVQ-ASG9A
|
|
|
|