ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
September 11, 2014, 12:07:20 AM |
|
just tested the new gpuminer with my GTX660. I'm also not sure about the last parameter, but I was only able to use 16 threads, so I decided to go with
...2000 16 64
which resulted in around 2500 nonces per minute, which is around the value I get from my old Core i5 750 (with half the power ^^). I'm tempted to try it on my mining rig with 5x750Ti, but there is currently a plotting running with 3TB on a i7 and it would suck a little if the gpu miner would not work with all cards ^^
|
|
|
|
BurstBurst
|
|
September 11, 2014, 12:07:26 AM |
|
Work great. Get 16.9K Nonces/Minutes. Good for my 40TB. GPU plot generator v2.0.0 Changelog: Kernel split to increase graphic cards compatibility (introduction of the <hashesNumber> parameter to batch hashes computations). OpenCL platforms and devices listing added. Platform and device selection added as generation parameters. Enhanced CPU and GPU support (removed the auto-selection and fallback). Clearer information display. Displaying the % and nonces/minutes while generating plots. README added with some basic build and run instructions. Makefile cleaned up. Windows x86 binaries: https://mega.co.nz/#!2BNDXY4L!jgwHDZXDJyFp2Jg5mN8sxtpplgXEInSMf1cQGbPc5lM Sources: https://mega.co.nz/#!LZs1RapR!6VGB1SssX5lFp8GX0bZmN2OH-MftLVzEAn1P1nKrdwA Please read the README provided with both the binaries and the sources. Your feedbacks are welcome, it greatly helps me. If you like this software, support me Roadmap for the next versions (feel free to post your features/ideas) : Kernel enhancement to speed up plot generation (shabal core can be improved). Find a way to reduce the memory overhead caused by my workaround solution to bypass the per-thread local memory limit. Make a list of graphic cards along with their optimal parameters (needs your participation). >>>>>>> There is a dedicated topic on the new forum for the GPU plot generator http://burstforum.com/index.php?threads/gpu-plot-generator.45/ <<<<<<<
|
|
|
|
bitminer82
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 11, 2014, 12:08:31 AM |
|
gpuPlotGenerator generate <platformId> <deviceId> <path> <address> <start nonce> <nonces> <stagger size> <threads> ? ? ? ? gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 ? ? ?
is that correct?
Try: gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 8160
|
|
|
|
paradigmflux
|
|
September 11, 2014, 12:12:13 AM |
|
Cool Burstmultipool is ligit. Found my first payout.
Pointing my shit again to the pool.
yea, pool is great, I will continue to mine there. support burst price!! MINE at burstmultipool.com!!! We need more buy support guys don't just plot use your legacy miners at burstmultipool.Com
|
|
|
|
pimytron
Newbie
Offline
Activity: 55
Merit: 0
|
|
September 11, 2014, 12:13:07 AM |
|
gpuPlotGenerator generate <platformId> <deviceId> <path> <address> <start nonce> <nonces> <stagger size> <threads> ? ? ? ? gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 ? ? ?
is that correct?
Try: gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 8160 thanks
|
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
|
September 11, 2014, 12:18:58 AM |
|
Cool Burstmultipool is ligit. Found my first payout.
Pointing my shit again to the pool.
yea, pool is great, I will continue to mine there. support burst price!! MINE at burstmultipool.com!!! We need more buy support guys don't just plot use your legacy miners at burstmultipool.Com I am but I don't see any shares coming to me and the mhs does not jibe with what I am throwing at it. I'm mining X11.
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
twig123
|
|
September 11, 2014, 12:19:06 AM |
|
GPU plot generator v2.0.0 Changelog: Kernel split to increase graphic cards compatibility (introduction of the <hashesNumber> parameter to batch hashes computations). OpenCL platforms and devices listing added. Platform and device selection added as generation parameters. Enhanced CPU and GPU support (removed the auto-selection and fallback). Clearer information display. Displaying the % and nonces/minutes while generating plots. README added with some basic build and run instructions. Makefile cleaned up. Windows x86 binaries: https://mega.co.nz/#!2BNDXY4L!jgwHDZXDJyFp2Jg5mN8sxtpplgXEInSMf1cQGbPc5lM Sources: https://mega.co.nz/#!LZs1RapR!6VGB1SssX5lFp8GX0bZmN2OH-MftLVzEAn1P1nKrdwA Please read the README provided with both the binaries and the sources. Your feedbacks are welcome, it greatly helps me. If you like this software, support me Roadmap for the next versions (feel free to post your features/ideas) : Kernel enhancement to speed up plot generation (shabal core can be improved). Find a way to reduce the memory overhead caused by my workaround solution to bypass the per-thread local memory limit. Make a list of graphic cards along with their optimal parameters (needs your participation). >>>>>>> There is a dedicated topic on the new forum for the GPU plot generator http://burstforum.com/index.php?threads/gpu-plot-generator.45/ <<<<<<< Awesome! Just tested it out on Linux (Ubuntu 14), I had to modify a couple more things than what was in the readme: OPENCL_INCLUDE = ../_opencl/include OPENCL_LIB = ../_opencl/lib/win/x86 CC = /c/_data/cryo/_apps/mingw/bin/g++ CC_FLAGS = -ansi -pedantic -W -Wall -std=c++0x -O3 -I$(OPENCL_INCLUDE) LD = /c/_data/cryo/_apps/mingw/bin/g++
I changed these to my locations (also CC and LD needed to be changed): OPENCL_INCLUDE = ../opt/AMDAPPSDK-2.9-1/include OPENCL_LIB = ../opt/AMDAPPSDK-2.9-1/lib/x86_64 CC = g++ CC_FLAGS = -ansi -pedantic -W -Wall -std=c++0x -O3 -I$(OPENCL_INCLUDE) LD = g++
I attempted to do a "make dist" but it was complaining that the "bin" folder didn't exist. I created the bin folder manually, and then I was then able to issue a "make dist" and got the following: Compiling [Command.cpp] Compiling [CommandGenerate.cpp] Compiling [CommandHelp.cpp] Compiling [CommandList.cpp] CommandList.cpp:54:5: warning: unused parameter ‘p_args’ [-Wunused-parameter] int CommandList::listPlatforms(const std::vector<std::string>& p_args) { ^ Compiling [gpuPlotGenerator.cpp] Compiling [OpenclError.cpp] Linking [bin/gpuPlotGenerator.exe] Generating distribution Not sure if that is a critical issue or not, but I ran the app anyways.... and it appears to be GENERATING PLOTS on my AMD Radeon 7800! ./gpuPlotGenerator.exe generate 0 0 /media/twig/Burst_Coin_21/GPU_Plotter_v2.0.0/bin/plots 11111222223333344444 14670000 7335000 1000 64 1024 Also, not sure on the "hashes" (1024) number really compares to though On my AMD Radeon 7800! WOOT! 121,000 nonces/minute!
|
Bitcoin: 11c3RRAyVA33DrkNyRz9dfvLogvGvYKWL
|
|
|
SpeedDemon13
|
|
September 11, 2014, 12:19:21 AM |
|
GPU plot generator v2.0.0 Changelog: Kernel split to increase graphic cards compatibility (introduction of the <hashesNumber> parameter to batch hashes computations). OpenCL platforms and devices listing added. Platform and device selection added as generation parameters. Enhanced CPU and GPU support (removed the auto-selection and fallback). Clearer information display. Displaying the % and nonces/minutes while generating plots. README added with some basic build and run instructions. Makefile cleaned up. Windows x86 binaries: https://mega.co.nz/#!2BNDXY4L!jgwHDZXDJyFp2Jg5mN8sxtpplgXEInSMf1cQGbPc5lM Sources: https://mega.co.nz/#!LZs1RapR!6VGB1SssX5lFp8GX0bZmN2OH-MftLVzEAn1P1nKrdwA Please read the README provided with both the binaries and the sources. Your feedbacks are welcome, it greatly helps me. If you like this software, support me Roadmap for the next versions (feel free to post your features/ideas) : Kernel enhancement to speed up plot generation (shabal core can be improved). Find a way to reduce the memory overhead caused by my workaround solution to bypass the per-thread local memory limit. Make a list of graphic cards along with their optimal parameters (needs your participation). >>>>>>> There is a dedicated topic on the new forum for the GPU plot generator http://burstforum.com/index.php?threads/gpu-plot-generator.45/ <<<<<<< we got to compile in windows :-( Only if you want to rebuild the source. Otherwise, the binaries work out of the box.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
September 11, 2014, 12:21:26 AM |
|
stupid question: which openCL package would I need to install on my Ubuntu 14.04 rig? I only have nVidia 750Ti cards there, so I guess the AMD drivers are not an option..
|
|
|
|
yellowduck2
|
|
September 11, 2014, 12:23:27 AM |
|
gpuPlotGenerator generate <platformId> <deviceId> <path> <address> <start nonce> <nonces> <stagger size> <threads> ? ? ? ? gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 ? ? ?
is that correct?
Try: gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 8160 how to use all card on rig to plot ? the deviceID only uses 1 card with your command ?
|
|
|
|
|
uray
|
|
September 11, 2014, 12:30:53 AM |
|
guys burst-pool.cryptoport.io is going to explode !we got 300+ miners at http://burst-pool.cryptoport.io, network traffic is huge, if we continue like this, more and more nonce submissions are going to be failed due to network lag. please use alternate pool if you can, and spread the hash power and network trafic, this is completely separate pool, so you need to re-do reward assignment transaction to this pool address, please follow the How-To on site alternate pool : http://burst-pool2.cryptoport.ioset your reward assignment to 16434009311448803259 (BURST-WBXV-ER87-3JCG-GNC6A) mining URL : http://burst-pool2.cryptoport.io port 8124 or http://burst-pool2.cryptoport.io port 80
|
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
|
September 11, 2014, 12:32:42 AM |
|
guys burst-pool.cryptoport.io is going to explode !we got 300+ miners at http://burst-pool.cryptoport.io, network traffic is huge, if we continue like this, more and more nonce submissions are going to be failed due to network lag. please use alternate pool if you can, and spread the hash power and network trafic, this is completely separate pool, so you need to re-do reward assignment transaction to this pool address, please follow the How-To on site alternate pool : http://burst-pool2.cryptoport.ioset your reward assignment to 16434009311448803259 (BURST-WBXV-ER87-3JCG-GNC6A) mining URL : http://burst-pool2.cryptoport.io port 8124 or http://burst-pool2.cryptoport.io port 80 Great idea. Have you considered releasing your source code to the community so other pools can be made? I know others have been asking for it.
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
BurstBurst
|
|
September 11, 2014, 12:33:13 AM |
|
Impossible !!!!!!!!!!!!! GPU plot generator v2.0.0 Changelog: Kernel split to increase graphic cards compatibility (introduction of the <hashesNumber> parameter to batch hashes computations). OpenCL platforms and devices listing added. Platform and device selection added as generation parameters. Enhanced CPU and GPU support (removed the auto-selection and fallback). Clearer information display. Displaying the % and nonces/minutes while generating plots. README added with some basic build and run instructions. Makefile cleaned up. Windows x86 binaries: https://mega.co.nz/#!2BNDXY4L!jgwHDZXDJyFp2Jg5mN8sxtpplgXEInSMf1cQGbPc5lM Sources: https://mega.co.nz/#!LZs1RapR!6VGB1SssX5lFp8GX0bZmN2OH-MftLVzEAn1P1nKrdwA Please read the README provided with both the binaries and the sources. Your feedbacks are welcome, it greatly helps me. If you like this software, support me Roadmap for the next versions (feel free to post your features/ideas) : Kernel enhancement to speed up plot generation (shabal core can be improved). Find a way to reduce the memory overhead caused by my workaround solution to bypass the per-thread local memory limit. Make a list of graphic cards along with their optimal parameters (needs your participation). >>>>>>> There is a dedicated topic on the new forum for the GPU plot generator http://burstforum.com/index.php?threads/gpu-plot-generator.45/ <<<<<<< Awesome! Just tested it out on Linux (Ubuntu 14), I had to modify a couple more things than what was in the readme: OPENCL_INCLUDE = ../_opencl/include OPENCL_LIB = ../_opencl/lib/win/x86 CC = /c/_data/cryo/_apps/mingw/bin/g++ CC_FLAGS = -ansi -pedantic -W -Wall -std=c++0x -O3 -I$(OPENCL_INCLUDE) LD = /c/_data/cryo/_apps/mingw/bin/g++
I changed these to my locations (also CC and LD needed to be changed): OPENCL_INCLUDE = ../opt/AMDAPPSDK-2.9-1/include OPENCL_LIB = ../opt/AMDAPPSDK-2.9-1/lib/x86_64 CC = g++ CC_FLAGS = -ansi -pedantic -W -Wall -std=c++0x -O3 -I$(OPENCL_INCLUDE) LD = g++
I attempted to do a "make dist" but it was complaining that the "bin" folder didn't exist. I created the bin folder manually, and then I was then able to issue a "make dist" and got the following: Compiling [Command.cpp] Compiling [CommandGenerate.cpp] Compiling [CommandHelp.cpp] Compiling [CommandList.cpp] CommandList.cpp:54:5: warning: unused parameter ‘p_args’ [-Wunused-parameter] int CommandList::listPlatforms(const std::vector<std::string>& p_args) { ^ Compiling [gpuPlotGenerator.cpp] Compiling [OpenclError.cpp] Linking [bin/gpuPlotGenerator.exe] Generating distribution Not sure if that is a critical issue or not, but I ran the app anyways.... and it appears to be GENERATING PLOTS on my AMD Radeon 7800! ./gpuPlotGenerator.exe generate 0 0 /media/twig/Burst_Coin_21/GPU_Plotter_v2.0.0/bin/plots 11111222223333344444 14670000 7335000 1000 64 1024 Also, not sure on the "hashes" (1024) number really compares to though On my AMD Radeon 7800! WOOT! 121,000 nonces/minute!
|
|
|
|
bitminer82
Newbie
Offline
Activity: 56
Merit: 0
|
|
September 11, 2014, 12:35:23 AM |
|
gpuPlotGenerator generate <platformId> <deviceId> <path> <address> <start nonce> <nonces> <stagger size> <threads> ? ? ? ? gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 ? ? ?
is that correct?
Try: gpuPlotGenerator generate 0 0 <path> <address> 0 800000 1000 128 8160 how to use all card on rig to plot ? the deviceID only uses 1 card with your command ? I'm not sure on that... My guess would be you would have the different cards do different plots: gpuPlotGenerator generate 0 1 <path> <address> 1 1000000 1000 128 8160 gpuPlotGenerator generate 0 2 <path> <address> 1000001 2000000 1000 128 8160 gpuPlotGenerator generate 0 3 <path> <address> 2000001 3000000 1000 128 8160
|
|
|
|
ltcnim
Legendary
Offline
Activity: 914
Merit: 1001
|
|
September 11, 2014, 12:36:17 AM |
|
stupid question: which openCL package would I need to install on my Ubuntu 14.04 rig? I only have nVidia 750Ti cards there, so I guess the AMD drivers are not an option..
|
|
|
|
fudge
|
|
September 11, 2014, 12:42:53 AM |
|
Guys, i have a small overlap for 2 plots. Is it ok or I should re-plot?
|
Haшa гpyшa нaйpoзкopчyмaкyвaтiшa!
|
|
|
SpeedDemon13
|
|
September 11, 2014, 12:45:35 AM |
|
Guys, i have a small overlap for 2 plots. Is it ok or I should re-plot?
Shouldn't be anything major and you should be fine.
|
CRYPTSY exchange: https://www.cryptsy.com/users/register?refid=9017 BURST= BURST-TE3W-CFGH-7343-6VM6R BTC=1CNsqGUR9YJNrhydQZnUPbaDv6h4uaYCHv ETH=0x144bc9fe471d3c71d8e09d58060d78661b1d4f32 SHF=0x13a0a2cb0d55eca975cf2d97015f7d580ce52d85 EXP=0xd71921dca837e415a58ca0d6dd2223cc84e0ea2f SC=6bdf9d12a983fed6723abad91a39be4f95d227f9bdb0490de3b8e5d45357f63d564638b1bd71 CLAMS=xGVTdM9EJpNBCYAjHFVxuZGcqvoL22nP6f SOIL=0x8b5c989bc931c0769a50ecaf9ffe490c67cb5911
|
|
|
fudge
|
|
September 11, 2014, 12:56:22 AM |
|
Guys, i have a small overlap for 2 plots. Is it ok or I should re-plot?
Shouldn't be anything major and you should be fine. Thanks!
|
Haшa гpyшa нaйpoзкopчyмaкyвaтiшa!
|
|
|
wacko
Legendary
Offline
Activity: 1106
Merit: 1014
|
|
September 11, 2014, 01:01:00 AM |
|
1 miner already take up 90% of cpu.
What if you bind each miner's process to a single cpu core? Does the hashrate go down after this?
|
|
|
|
|