[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[uray]

uray pool is stuck on "retrying" for submitting shares

which pool?
if its on first, then please move to http://burst-pool2.cryptoport.io

no it's the second, now seems better

it seems the limit is about 80-90 miners

[duncan_idaho]

Is the http://burst-pool.cryptoport.io working but sometimes lost shares or no working at all ? Can i stay there adn wait for resolve problem or deinitely change to http://burst-pool2.cryptoport.io ?

[reza_abay]

OK so the gpu ploter works fine, but it's kinda slow My best result is about 1200 n/m on a single Radeon 7950.

My config:

/gpuPlotGenerator generate 0 0 /plots <number> 6400000 700000 128 16 8160
pause

any ideas how to improve?

I think you may increase <threadsNumber> to 64

I tried with 64 threads but it slows down, it's faster with 16 threads.

So it still takes about 2 days to plot 1TB.
Is there a way to make a single plot with 2 video cards? Or just 1 plot per card.

you create just 1 plot per card bu you can overlap with 2 video card.
example for 1 Tb plot (each plot 500 gig)
gpuPlotGenerator generate 0 0 "pocminer_pool_v1\plots" your acount adress 0 2500000 1000 32 8160
gpuPlotGenerator generate 0 1 "pocminer_pool_v1\plots" your acount adress 2500001 2500000 1000 32 8160

[uray]

Is the http://burst-pool.cryptoport.io working but sometimes lost shares or no working at all ? Can i stay there adn wait for resolve problem or deinitely change to http://burst-pool2.cryptoport.io ?

its working but under heavy load, so sometime you timedout when submit share

[remulan]

OK so the gpu ploter works fine, but it's kinda slow My best result is about 1200 n/m on a single Radeon 7950.

My config:

/gpuPlotGenerator generate 0 0 /plots <number> 6400000 700000 128 16 8160
pause

any ideas how to improve?

I think you may increase <threadsNumber> to 64

I tried with 64 threads but it slows down, it's faster with 16 threads.

So it still takes about 2 days to plot 1TB.
Is there a way to make a single plot with 2 video cards? Or just 1 plot per card.

as I understand no, but you can try split it to 2 plots and start generate as:
/gpuPlotGenerator generate 0 0 /plots <number> 6400000 350000 128 16 8160
/gpuPlotGenerator generate 0 0 /plots <number> 6750001 350000 128 16 8160

[LivsUA]

uray pool is stuck on "retrying" for submitting shares

which pool?
if its on first, then please move to http://burst-pool2.cryptoport.io

my page is dont want to download on :
http://burst-pool2.cryptoport.io



But shares are sending well.

Where can i find my miner on that pool? Or where can i see how many shares i send? Thx

[jzhoulon]

Is the http://burst-pool.cryptoport.io working but sometimes lost shares or no working at all ? Can i stay there adn wait for resolve problem or deinitely change to http://burst-pool2.cryptoport.io ?

move to pool2. lost shares is because too many miners in it and cause network' stress too much

[duncan_idaho]

Uray is it networking problem or serwe hardware load ? Or maybe ddos ? Can you limit max miners manually ?

[Sglasio]

Devices number: 2
----
Id:                      0
Type:                    GPU
Name:                    Tahiti
Vendor:                  Advanced Micro Devices, Inc.
Version:                 OpenCL 1.2 AMD-APP (1268.1)
Driver version:          1268.1 (VM)
Max global memory size:  2048 MB
Max local memory size:   32 KB
Max work group size:     256
----
Id:                      1
Type:                    CPU
Name:                    AMD FX(tm)-8320 Eight-Core Processor
Vendor:                  AuthenticAMD
Version:                 OpenCL 1.2 AMD-APP (1268.1)
Driver version:          1268.1 (sse2,avx,fma4)
Max global memory size:  2048 MB
Max local memory size:   32 KB
Max work group size:     1024


Why my R9 280x show me 2048 Gb max?

[remulan]

2 miners connected to uray should I create different accounts or only different plots
as 1st miner (0-100) 2nd (101-200) ?
(to avoid situation when 1st miner will looking nonce 110)

[yellowduck2]

Is the http://burst-pool.cryptoport.io working but sometimes lost shares or no working at all ? Can i stay there adn wait for resolve problem or deinitely change to http://burst-pool2.cryptoport.io ?

its working but under heavy load, so sometime you timedout when submit share

The payout frequency seems to be very long. There isn't 250 payout anymore ?

A lot of miner on http://burst-pool2.cryptoport.io stack quite a bit of coins.

[HunterS]

does anyone else have trouble with usb hard drives stop mining occasionally.i ahve 3 hdd mining.2 are in my tower the other usb.2 in tower never stop.

[uray]

Uray is it networking problem or serwe hardware load ? Or maybe ddos ? Can you limit max miners manually ?

its hashing problem, its heavy to check nonce submission to produce deadline value, when new block is announced, all miners at the same time submit their nonce to pool, then pool need to check their nonce one by one, some miner will say its submission error while they are waiting for deadline result, but actually the deadline is submitted but more than 15 seconds later

[coinits]

I have a lot of failed to submit nonce recent

Is there a problem with the Uray pool?

i switch to Burstcoin V2 pool...

too many unsubmitted shares on http://burst-pool.cryptoport.io/!

i confirm mining is ok on V2 pool!
i'm getting burst!

The pool operators have failed to acknowledge requests to release their source code. To make the POC algo go forward it should be a no-brainer to release it to Github. The way that this coin is growing, unless a lot more pools spring up people are going to become frustrated by not having a way to mine.

EDIT: Uray has just acknowledged a request and said no because the code is not ready for distribution and would cause more problems. He is coming out with Pool 3 as soon as he has the money.

i can push it to github, but i really can't support the deployment, and troubleshooting as i am still busy developing this pool, and the block explorer

Would be great to have the pool source available. that everyone that want can try to run his own pool.

here it is : https://github.com/uraymeiviar/burst-pool

and plase dont just clone it then run it, that code need to be improved, patched, and bug fixed
pull request is welcome

Thank you

[uray]

Is the http://burst-pool.cryptoport.io working but sometimes lost shares or no working at all ? Can i stay there adn wait for resolve problem or deinitely change to http://burst-pool2.cryptoport.io ?

its working but under heavy load, so sometime you timedout when submit share

The payout frequency seems to be very long. There isn't 250 payout anymore ?

A lot of miner on http://burst-pool2.cryptoport.io stack quite a bit of coins.

pool2 still has lower hash power than the first, it doesnt find block more often than pool1

[Sglasio]

7000 nonces/min from my r9 280x , it's ok or too small?

My 7970 does 11.5k~11.7k nonces/min, 7970 is about the same as a 280x.

Try 3072 for stagger size, 128 thread and 8160 hashes.

i try, but i have error -61 Buffer cannot create... bla bla bla (((

Try a lower stagger size, maybe 2048.

i try 2048, 3079, 3192, 4096 .... result wich one... -61 error

Maybe reinstall the driver and APP SDK. Use DDU driver cleaner, before reinstalling. Are you using AMD 13.9 driver or 14.x driver? I'm using 13.9 with 2.9.1 APP SDK.

13.9
but my GPU detected in computer managment 7900... i think it's wrong.

[uray]

2 miners connected to uray should I create different accounts or only different plots
as 1st miner (0-100) 2nd (101-200) ?
(to avoid situation when 1st miner will looking nonce 110)

you can't have both account at different pool, since you need to choose where your account reward assignment will be
but multiple miners on same account is accepted by pool

[Amph]

Is the http://burst-pool.cryptoport.io working but sometimes lost shares or no working at all ? Can i stay there adn wait for resolve problem or deinitely change to http://burst-pool2.cryptoport.io ?

its working but under heavy load, so sometime you timedout when submit share

The payout frequency seems to be very long. There isn't 250 payout anymore ?

A lot of miner on http://burst-pool2.cryptoport.io stack quite a bit of coins.

pool2 still has lower hash power than the first, it doesnt find block more often than pool1

if the v1 has only later payout, then it's better to stay there as the second one is smaller

[Crescendoo]

So overall which pool is best for now? Urays v1, http://burst-pool.cryptoport.io or smth else ?

[rememberthelost]

Buyback of 1000BURST asset at Asset Exchange. BURST Gateway discontinued.
I've placed buyback wall at AE at 50NXT/1000BURST, it is 10% above current c-cex price (0.00000255BTC/Burst).
Or I can buyback assets for BTC, at 0.00270 BTC/1000BURST, it is 5% above current c-cex price.
The buyback wall with price above c-cex will continue at least for 2 weeks.

Of course among 21 asset holders there are those, who want their BURST coins, some of them invested for a long run, and they don't want to convert to BTC.  Unfortunatly, I can sent BURST coins only later, not right now.
Because I have made mistake. The BURST Gateway, unlike MultiGateWay, is a manual gateway, so it is hard not to make mistake. I've made it with my FIM Gateway (rather small), and made with BURST Gateway, quite big. I've sent 2'883.068 * 1000BURST assets (tx=2680958876512593946) instead of 2.883.  It is 2'88 mil BURST, it is huge, though it 20% less then 1 day mining income of BURST. The market at c-cex is weak right now, and it is impossible to buy such volume at the time moment. It would led to pump'n'dump, wich is bad for me, and for Burst. I tried to buy from whales, have wrote them (arbitrary) messages, but no luck so far.

So I'll send BURST to asset holders in 1-2 month, with 5%/month interest. Maybe some whale(s) can sell me bulk amount of BURST, than I can send BURSTcoins to asset holders earlier.
Right now I can send only 10.38% of each asset (based on current Gateway balance).

The details of the mistake: I received  2'912.18998718 BURST coins with tx=9467129832984202729,
but sent 2'883.068 (= 2'912.1899 - 1%) * 1000BURST assets, 1000 times more. The guy, who receive that asset, is new to crypto, and to Asset Exchange. He sold that assets at 10-11-12 NXT. After I discovered the mistake (it was hard, just check the amount of txs at my issuing account). I wrote him (arbitrary) message, and he returned NXT he gain (a little consolation, hough).

The buyback wall with price 50nxt/1000burst  has been setting  for nearly 2 weeks.  When will you cancle the buyback wall ?  Can we withdraw our burst coins when you cancle the buyback wall?