[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[ReDPoiSoN]

Why my wallets on three different pc are resyncing at the same time?!

2014-09-10 23:40:02 INFO: Burst server 1.1.0 started successfully.
2014-09-10 23:40:04 INFO: nxt.apiServerEnforcePOST = "true"
2014-09-11 17:40:04 INFO: Will do a re-scan
2014-09-11 17:40:04 INFO: Scanning blockchain...
2014-09-11 17:40:33 INFO: processed block 0
2014-09-11 17:40:39 INFO: processed block 5000

And miners aren't working..

{"baseTarget":"11025222","height":"8936","generationSignature":"6aa9f43a483a8c24
368941715f10256df9dfdbfde325c42e27b5ccc0ff1466e5"}
{"baseTarget":"10771063","height":"8939","generationSignature":"798ef2477213fdf4
ec6b58ff571f1ffb1d703bc44f31b17338a98111632fc70c"}

[1714931034]

1714931034

[1714931034]

1714931034

[1714931034]

1714931034

[1714931034]

1714931034

[1714931034]

1714931034

[1714931034]

1714931034

[Avaahnaa]

not recommended due to "failed to submit share" error. cause of high pool load i think.

Does someone know how to run the burst-pool by uray? I downloaded the source but I dont know how to run it.

That's why I want to build my own pool on my own server to get rid of the high pool load problem.

Thats what im saying, is that it only list the CPU and its Device number 1

I installed amd sdk 2.9.1.  After installation do i need to do anything else to get it to work?

What Catalyst driver version do you have?  Mine is 14.7

Same...

Other than checking that your files are correctly located I am afraid that I have no idea why your gpu isn't 'seen'.
Sorry
Hopefully someone else can help you out though.

Where exactly should they be and what files?  I tried following the readme attached to the 2.0 plotter but i have no clue about the setup and how modify the makefile...

Root directory for one particular drive I have plotted contains the gpuPlotGenerator.exe, and folder called kernel containing three command files (nonce, shabal and util).
Plus the README but obviously not important for functionality.
In addition I have created the plots folder and the batch launch file.  

In order to begin plotting, this was all that was required. Added the miner in also.

How the gpu.exe locates the gpu I do not know, though if you have all of the drivers and such in their default install locations then that shouldn't be a problem.  If they are not then maybe that is the problem.  As I said I do not know how the gpu.exe attempts to locate this information.

[ReDPoiSoN]

Why my wallets on three different pc are resyncing at the same time?!

2014-09-10 23:40:02 INFO: Burst server 1.1.0 started successfully.
2014-09-10 23:40:04 INFO: nxt.apiServerEnforcePOST = "true"
2014-09-11 17:40:04 INFO: Will do a re-scan
2014-09-11 17:40:04 INFO: Scanning blockchain...
2014-09-11 17:40:33 INFO: processed block 0
2014-09-11 17:40:39 INFO: processed block 5000

And miners aren't working..

{"baseTarget":"11025222","height":"8936","generationSignature":"6aa9f43a483a8c24
368941715f10256df9dfdbfde325c42e27b5ccc0ff1466e5"}
{"baseTarget":"10771063","height":"8939","generationSignature":"798ef2477213fdf4
ec6b58ff571f1ffb1d703bc44f31b17338a98111632fc70c"}

And same in pool! Look at the block height!

[newuser01]

Why my wallets on three different pc are resyncing at the same time?!

2014-09-10 23:40:02 INFO: Burst server 1.1.0 started successfully.
2014-09-10 23:40:04 INFO: nxt.apiServerEnforcePOST = "true"
2014-09-11 17:40:04 INFO: Will do a re-scan
2014-09-11 17:40:04 INFO: Scanning blockchain...
2014-09-11 17:40:33 INFO: processed block 0
2014-09-11 17:40:39 INFO: processed block 5000

And miners aren't working..

{"baseTarget":"11025222","height":"8936","generationSignature":"6aa9f43a483a8c24
368941715f10256df9dfdbfde325c42e27b5ccc0ff1466e5"}
{"baseTarget":"10771063","height":"8939","generationSignature":"798ef2477213fdf4
ec6b58ff571f1ffb1d703bc44f31b17338a98111632fc70c"}

have you updated your wallet

currently block is 11138...

edit.. noticed something strange with my miners

{
  "height": "11136",
  "generationSignature": "fb3dd92ee56a3dbe0548394aaf8a0823dce6f7180f278697b2a6d1
  "baseTarget": "5513365",
  "targetDeadline": "75000"
}
{
  "height": "3171",
  "generationSignature": "6652f9fbee10106e49d5f1a27ee89db52c3ba67e319f72d4cfd5cd
  "baseTarget": "48904875",
  "targetDeadline": "75000"
}
{
  "height": "8148",
  "generationSignature": "81873b1ff3f20ad0ac36d78e6ad1d53df0475cdba1d7b7299a7350
  "baseTarget": "13957505",
  "targetDeadline": "75000"
}
{
  "height": "9703",
  "generationSignature": "2b47ef0be201fefae314a7d6f108e056ee9ad947e5b293d305e857
  "baseTarget": "7351946",
  "targetDeadline": "75000"
}
{
  "height": "11136",
  "generationSignature": "aa7d629b819c484c6bcef0ed849067a5ef1bca96f197b0e627e016
  "baseTarget": "5484683",
  "targetDeadline": "75000"
}
No valid shares to submit to pool
{
  "height": "11137",
  "generationSignature": "c80b93156a251108ab2926d27742a5f00e1001042e22c9ba963001
  "baseTarget": "5381061",
  "targetDeadline": "75000"
}



what happend???

[LivsUA]

So I started plotting last night (been 14 hours) using the command:
sh run_generate.sh myaddress 0 7549747200 8121 4    (for my 2TB drive)

I looked today and see that I have one plot (~185GB).

Does this sound correct?

I thought this was supposed to generate a bunch of plots around the 2GB range?

I am on 64-bit linux (14.04) 4gb ram and just testing it out with my 2 TB drive before adding more.

Thanks.

Regards,

LC

I am not sure how this works on linux but,
for windows you use this command to generate 2TB:

Code:

"C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 7xxxxxxxxxxxx71 0 8192000 6000 4

8192000 --> (2000(2TB)*1024*1024)/256
6000  --> RAM
4   --> CPU core's

[LosingCoins]

So I started plotting last night (been 14 hours) using the command:
sh run_generate.sh myaddress 0 7549747200 8121 4    (for my 2TB drive)

I looked today and see that I have one plot (~185GB).

Does this sound correct?

I thought this was supposed to generate a bunch of plots around the 2GB range?

I am on 64-bit linux (14.04) 4gb ram and just testing it out with my 2 TB drive before adding more.

Thanks.

Regards,

LC

I am not sure how this works on linux but,
for windows you use this command to generate 2TB:

Code:

"C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 7xxxxxxxxxxxx71 0 8192000 6000 4

8192000 --> (2000(2TB)*1024*1024)/256
6000  --> RAM
4   --> CPU core's

Well it is plotting fine, i was just wondering if it is supposed to be 1 big plot or a lot of smaller plots?

[marcus556]

not recommended due to "failed to submit share" error. cause of high pool load i think.

Does someone know how to run the burst-pool by uray? I downloaded the source but I dont know how to run it.

That's why I want to build my own pool on my own server to get rid of the high pool load problem.

Thats what im saying, is that it only list the CPU and its Device number 1

I installed amd sdk 2.9.1.  After installation do i need to do anything else to get it to work?

What Catalyst driver version do you have?  Mine is 14.7

Same...

Other than checking that your files are correctly located I am afraid that I have no idea why your gpu isn't 'seen'.
Sorry
Hopefully someone else can help you out though.

Where exactly should they be and what files?  I tried following the readme attached to the 2.0 plotter but i have no clue about the setup and how modify the makefile...

Root directory for one particular drive I have plotted contains the gpuPlotGenerator.exe, and folder called kernel containing three command files (nonce, shabal and util).
Plus the README but obviously not important for functionality.
In addition I have created the plots folder and the batch launch file.  

In order to begin plotting, this was all that was required. Added the miner in also.

How the gpu.exe locates the gpu I do not know, though if you have all of the drivers and such in their default install locations then that shouldn't be a problem.  If they are not then maybe that is the problem.  As I said I do not know how the gpu.exe attempts to locate this information.

I have everything like you said, it doesnt make much sense...

[Avaahnaa]

So I started plotting last night (been 14 hours) using the command:
sh run_generate.sh myaddress 0 7549747200 8121 4    (for my 2TB drive)

I looked today and see that I have one plot (~185GB).

Does this sound correct?

I thought this was supposed to generate a bunch of plots around the 2GB range?

I am on 64-bit linux (14.04) 4gb ram and just testing it out with my 2 TB drive before adding more.

Thanks.

Regards,

LC

I am not sure how this works on linux but,
for windows you use this command to generate 2TB:

Code:

"C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 7xxxxxxxxxxxx71 0 8192000 6000 4

8192000 --> (2000(2TB)*1024*1024)/256
6000  --> RAM
4   --> CPU core's

Well it is plotting fine, i was just wondering if it is supposed to be 1 big plot or a lot of smaller plots?

One file is created for each run_generate instance.
I you want multiple files then you must run run_generate multiple times.

So what you have is one file and should only be one file

and
sh run_generate.sh myaddress 0 3774873600 8121 4 
followed by
sh run_generate.sh myaddress 3774873600 3774873600 8121 4 

will create two files each with half the file size of the one you posted

[yellowduck2]

i finish plotting all my HDD. i am bored now 

[Amph]

i finish plotting all my HDD. i am bored now 

how many TB?

[yellowduck2]

i finish plotting all my HDD. i am bored now  

how many TB?

not much 15 TB. Might be getting more but will see. 750 ti is very bad at plotting, perhaps not optimize.

[unsoindovo]

uray i have switched to your pool..

my address:
BURST-2HN2-3XVV-QVUX-7G869

but i don't understand if all is ok after setting http://127.0.0.1:8125/rewardassignment.html params!

can you check plz?

or maybe, why you do not do 3 page like burst pool http://178.62.39.204:8121/:

Current share counts
Current allowed users
Current user balances

than kyou!!

[LosingCoins]

So I started plotting last night (been 14 hours) using the command:
sh run_generate.sh myaddress 0 7549747200 8121 4    (for my 2TB drive)

I looked today and see that I have one plot (~185GB).

Does this sound correct?

I thought this was supposed to generate a bunch of plots around the 2GB range?

I am on 64-bit linux (14.04) 4gb ram and just testing it out with my 2 TB drive before adding more.

Thanks.

Regards,

LC

I am not sure how this works on linux but,
for windows you use this command to generate 2TB:

Code:

"C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 7xxxxxxxxxxxx71 0 8192000 6000 4

8192000 --> (2000(2TB)*1024*1024)/256
6000  --> RAM
4   --> CPU core's

Well it is plotting fine, i was just wondering if it is supposed to be 1 big plot or a lot of smaller plots?

One file is created for each run_generate instance.
I you want multiple files then you must run run_generate multiple times.

So what you have is one file and should only be one file

and
sh run_generate.sh myaddress 0 3774873600 8121 4 
followed by
sh run_generate.sh myaddress 3774873600 3774873600 8121 4 

will create two files each with half the file size of the one you posted

Thank you. It is all finally starting to make sense.

My last question is about the stagger parameter.
I was under the impression the size of each plot would be stagger * 256kb  = 8121*256kb = ~2gb according to the linux guide.

So now, I think it is generating 2gb  plots at a time then appending it all to the same file. Is this correct?

Thank you for your help.

[Avaahnaa]

So I started plotting last night (been 14 hours) using the command:
sh run_generate.sh myaddress 0 7549747200 8121 4    (for my 2TB drive)

I looked today and see that I have one plot (~185GB).

Does this sound correct?

I thought this was supposed to generate a bunch of plots around the 2GB range?

I am on 64-bit linux (14.04) 4gb ram and just testing it out with my 2 TB drive before adding more.

Thanks.

Regards,

LC

I am not sure how this works on linux but,
for windows you use this command to generate 2TB:

Code:

"C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate 7xxxxxxxxxxxx71 0 8192000 6000 4

8192000 --> (2000(2TB)*1024*1024)/256
6000  --> RAM
4   --> CPU core's

Well it is plotting fine, i was just wondering if it is supposed to be 1 big plot or a lot of smaller plots?

One file is created for each run_generate instance.
I you want multiple files then you must run run_generate multiple times.

So what you have is one file and should only be one file

and
sh run_generate.sh myaddress 0 3774873600 8121 4 
followed by
sh run_generate.sh myaddress 3774873600 3774873600 8121 4 

will create two files each with half the file size of the one you posted

Thank you. It is all finally starting to make sense.

My last question is about the stagger parameter.
I was under the impression the size of each plot would be stagger * 256kb  = 8121*256kb = ~2gb according to the linux guide.

So now, I think it is generating 2gb  plots at a time then appending it all to the same file. Is this correct?

Thank you for your help.

Yes

[soulmann]

I dont see any changes in share count and balance on 178.62.39.204:8121 for several hours. Is it working fine?

[phreakk]

I dont see any changes in share count and balance on 178.62.39.204:8121 for several hours. Is it working fine?

Yes. I am getting shares and payout all morning.

[Amph]

i forgot a thing, plots need to be sequential?

[DMaster2008]

i forgot a thing, plots need to be sequential?

Nope. They just should not overlap.

[marcus556]

not recommended due to "failed to submit share" error. cause of high pool load i think.

Does someone know how to run the burst-pool by uray? I downloaded the source but I dont know how to run it.

That's why I want to build my own pool on my own server to get rid of the high pool load problem.

Thats what im saying, is that it only list the CPU and its Device number 1

I installed amd sdk 2.9.1.  After installation do i need to do anything else to get it to work?

What Catalyst driver version do you have?  Mine is 14.7

Same...

Other than checking that your files are correctly located I am afraid that I have no idea why your gpu isn't 'seen'.
Sorry
Hopefully someone else can help you out though.

Where exactly should they be and what files?  I tried following the readme attached to the 2.0 plotter but i have no clue about the setup and how modify the makefile...

Root directory for one particular drive I have plotted contains the gpuPlotGenerator.exe, and folder called kernel containing three command files (nonce, shabal and util).
Plus the README but obviously not important for functionality.
In addition I have created the plots folder and the batch launch file.  

In order to begin plotting, this was all that was required. Added the miner in also.

How the gpu.exe locates the gpu I do not know, though if you have all of the drivers and such in their default install locations then that shouldn't be a problem.  If they are not then maybe that is the problem.  As I said I do not know how the gpu.exe attempts to locate this information.

I wonder if using a PCI Express Riser has anything to do with it?  Im gonna try an run it on my computer at home with the 780ti onboard and see if it shows up or is NVIDIA not supported yet?

[chukiduck]

burst is controlled by fucking commis!!!!!!!
don't fall for this trap!!!!!

we are going down to 0$

burst means communism and is anti american

hahahaha
the laugh of the day !