[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[Vitalik_Pedik]

split incoming... again...

would be nice if Joe would check in, cuz I have no idea what the hell is going on!

He do it, splitting is side effect of his experiments with REAL chain
Ask him direct question about reason of splitting.

looks to me more like a problem with minerclaim nodes or like not many other wallets can connect their wallet

No, chain can't split itself without Joe actions with his 104.128.225.215 node
Ask him direct question about reason of splitting.

[ruplikminer]

Is mining this coin still profitable?

[Vitalik_Pedik]

Is mining this coin still profitable?

No, since october 2017. And never will be.
But most of miners talking about POW mining here, by not understandable reason for me, continue to mine)

[ruplikminer]

Is mining this coin still profitable?

No, since october 2017. And never will be.
But most of miners talking about POW mining here, by not understandable reason for me, continue to mine)

maybe because it's still profitable but you don't know it?

[Vitalik_Pedik]

Is mining this coin still profitable?

No, since october 2017. And never will be.
But most of miners talking about POW mining here, by not understandable reason for me, continue to mine)

maybe because it's still profitable but you don't know it?

ok)

[Vitalik_Pedik]

About profitability.

1Mh/s = 5XMG/day (max, avg not bigger 3XMG)
1Mh/s = 1,5$/day (5XMG * 0,3$)

What 1Mh/s is?
1 raspberry gives 15kh/s (67 raspberry pi = 3 350$)
1 CPU Intel Core I5 gives 60kh/s, in full load (16 computers on Intel Core I5 = 8 500$)

Where f*cking profitability is here, Carl)?

https://media.giphy.com/media/cPsoYUiMIfYSQ/giphy.gif

[djm34]

funny, just got a negative proof of stake block
-0.00004926 XMG (transaction fee...)

[Cooper54]

Is mining this coin still profitable?

No, since october 2017. And never will be.
But most of miners talking about POW mining here, by not understandable reason for me, continue to mine)

maybe because it's still profitable but you don't know it?

Hope you read previous posts before listening to that guy....He is the reason this coin is in the tanks at the moment.

[tazzz013]

About profitability.

1Mh/s = 5XMG/day (max, avg not bigger 3XMG)
1Mh/s = 1,5$/day (5XMG * 0,3$)

What 1Mh/s is?
1 raspberry gives 15kh/s (67 raspberry pi = 3 350$)
1 CPU Intel Core I5 gives 60kh/s, in full load (16 computers on Intel Core I5 = 8 500$)

Where f*cking profitability is here, Carl)?

https://media.giphy.com/media/cPsoYUiMIfYSQ/giphy.gif

Can you please tell me how I should be mining, keeping in mind I know alot less then you on this subject.

[tazzz013]

Latest on Minerclaim's Site

We are investigating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.

Findblocks disabled, new blocks will currently not show up in the frontend
Blockupdate disabled, blocks and transactions confirmations are delayed
Payouts disabled, you will not receive any coins to your offline wallet for the time being

[Jeremy450]

Hey Joe whats with the multiple splitting of the blockhains???

if it keeps going your going to have the pools shutdown due to frustrations.

[Jeremy450]

Latest on Minerclaim's Site

We are investigating issues in the backend. Your shares and hashrate are safe and we will fix things ASAP.

Findblocks disabled, new blocks will currently not show up in the frontend
Blockupdate disabled, blocks and transactions confirmations are delayed
Payouts disabled, you will not receive any coins to your offline wallet for the time being

its only affect port 3333

7008 is fine.

scratch that. just strange 3 of my miners on 7008 are still connected. but cant connect to it with other miners.

[Jeremy450]

Do I need to resync my entire wallet blockchain from scratch to get the right one? Does someone possibly have a backup of theirs I could possibly use? I just want to make sure that I'm running at fulll-speed before I leave for today's mother's day dinner.

Also, thanks for the merit, DOGEbubble. I'm glad I was able to help.

nothing wrong with that

just use 2 batch files.

could even do a batch file wtih task schedule and have it kill the previous miner and start the new one. not too hard.

i've taken it further with a cpu monitor, etc. and incorporated a back end db, etc that then reports to a website and then if i set a time where i want less threats, i just set it and then it does it automatically, etc.

and in the website i've hocked into the Minerclaims API where i can get all the info i need without even having to go to the website.

That's pretty neat. I'd love to see how you implemented that so perhaps I could integrate something like it into the 2nd version of my pool switcher.

i have all windows computers i dont know how it would go with Linux, as i created a monitoring program in VS

[Jeremy450]

Hey XpoolX

why isnt your site send out pin reset emails?? been waiting for almost 30mins

[xpoolx]

I was working on it last week and it should work fine, did you check spam folder?

[Jeremy450]

I was working on it last week and it should work fine, did you check spam folder?

yep always first thing i check.

[xpoolx]

I was working on it last week and it should work fine, did you check spam folder?

yep always first thing i check.

Let me check it please

[Jeremy450]

Minerclaim can you please go through and clean up the unconfirmed blocks again as ppl will have unconfirmed linked to no blocks, etc.

[jonathin.r]

About profitability.

1Mh/s = 5XMG/day (max, avg not bigger 3XMG)
1Mh/s = 1,5$/day (5XMG * 0,3$)

What 1Mh/s is?
1 raspberry gives 15kh/s (67 raspberry pi = 3 350$)
1 CPU Intel Core I5 gives 60kh/s, in full load (16 computers on Intel Core I5 = 8 500$)

Where f*cking profitability is here, Carl)?

Oh hun... you've got no right to be bitching about profit when you've stolen thousands of USD worth of XMG from the community.

[stevr59]

Compiling cpuminer-opt on Ubuntu 18.04

Please, do not directly quote this message!

Step 1: Installing Dependencies

To compile and run cpuminer-opt, your system will need to download a few programs. These are mission-critical for a successful compile. The following command will download and automatically install the programs necessary:

sudo apt-get install build-essential libssl-dev libcurl4-openssl-dev libjansson-dev libgmp-dev automake zlib1g-dev

Some of these programs will require that your system be updated to the latest LTS release of Ubuntu. Some versions of the programs necessary for cpuminer-opt to run are not contained in the repositories of older Ubuntu releases. You should update your system to Ubuntu 18.04 LTS if you haven't already.

Step 2: Downloading the Source Code

Execute the command below to download Version 3.8.8.1 of the program to your working directory, extract it, then change into the newly extracted folder: (execute each of these lines, one at a time)

wget https://github.com/JayDDee/cpuminer-opt/archive/v3.8.8.1.tar.gz

tar xvzf v3.8.8.1.tar.gz

cd ./cpuminer-opt-3.8.8.1

Step 3: Compiling the Program

Execute the command below to compile the program: (Again, execute each of these lines, one at a time):

./autogen.sh

CFLAGS=”-03 -march=native -Wall” ./configure –with-curl

make

If you plan on installing this to your system, make sure to change “make” to “sudo make install”, and if you encounter any issues, I'll try to remain open here to answer them to the best of my abilities. Hope this helped some!

 well  thats was to easy it was all ready compile in the arch  aur repos got it installl but didnt see any info on the commadns to fire it up so i did this
     (  /usr/bin/cpuminer -a m7m -o http://127.0.0.1:8232 -u myusername -p x  )       it works i am solo mining now on all 16 treads instead of the 8 the other gui miner was doing. not sure all the commands or best way to run it but yeah it works thanks...  UPDATE... found out i dont need the /usr/bin to run it  now i made a start up script   (   cpuminer -a m7m -o http://127.0.0.1:8232 -u myusername -p x   )

sad news i let my machine run wile i went to see my mom came back and system crashed i just made 40 magi coins solo mining and rebooted the machine and the os is toast. well have to reinstall. i was able to get to my magi coin file and save it so what do i need to do to get my wallet back? do i just need to replace new wallet.dat file with my saved wallet.dat file?