Bitcoin Forum
April 19, 2014, 05:03:14 PM *
News: Due to the OpenSSL heartbleed bug, changing your forum password is recommended.
 
   Home   Help Search Donate Login Register  
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [30] 31 32
  Print  
Author Topic: Ubuntu Natty Narwhal 11.04 Mining Guide / HOWTO  (Read 187468 times)
Crispin
Newbie
*
Offline Offline

Activity: 20


View Profile

Ignore
August 21, 2011, 09:44:45 PM
 #581

Linux noob here.  I am posting a couple questions somewhat related to this thread because of my need for some HOWTO action.

I followed the 64bit edition of this guide and it's working great for my 4 6790s. (I thought I did my homework on those but now I'm kinda stuck with them and would like to get the most out of them.) Anyway, since I am new to Linux, what can I do to make sure I have everything from this guide properly updated? I am not terribly afraid of the command line, but I still don't know enough about it to just start poking around. Is there anything to update at this time? If so, would someone be so kind as to post the couple lines it would take to get the job done?

I have also seen some posts about 6xxx cards not being able to be adjusted a whole lot. In my case, I am running at 950/850 @ 1.19V. Is there any kind of software utility I could install to let me further underclock my RAM and possibly undervolt to save a couple watts and degrees C?  I haven't had much luck looking around online.  I want to maximize efficiency, profit, etc. So I am looking for the sweet spot and would rather not toast my cards too soon. Perhaps I could even sell them at some point.

In case anyone has a setup similar to mine with really specific suggestions to offer, please PM (or post here for others' sake).

My system specs as follows:

Mobo: 790fx gd70
CPU: Sempron 140
RAM 1GB
GPU: 4x Sapphire 6790   950/850/1.19   
PSU: Corsair AX850

Mining at ~860Mhash/s @ 580W
Temps 65-80C depending on card and location on board

./phoenix.py ... -k phatk DEVICE=1 VECTORS BFI_INT WORKSIZE=256 AGGRESSION=13

I know some info here might be extraneous, but I wanted to post it for posterity and just in case...

I will gladly pay you Tuesday for a Bitcoin today... 
1PqTM8XXbs4yWaQy3n8Pg12SXAFZUVqrdZ
1397926994
Hero Member
*
Offline Offline

Posts: 1397926994

View Profile Personal Message (Offline)

Ignore
1397926994
Reply with quote  #2

1397926994
Report to moderator
1397926994
Hero Member
*
Offline Offline

Posts: 1397926994

View Profile Personal Message (Offline)

Ignore
1397926994
Reply with quote  #2

1397926994
Report to moderator
BTC.sx - Leveraged Bitcoin Trading. For an easy way to trade Bitcoin, using Bitcoin, sign up now.
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1397926994
Hero Member
*
Offline Offline

Posts: 1397926994

View Profile Personal Message (Offline)

Ignore
1397926994
Reply with quote  #2

1397926994
Report to moderator
1397926994
Hero Member
*
Offline Offline

Posts: 1397926994

View Profile Personal Message (Offline)

Ignore
1397926994
Reply with quote  #2

1397926994
Report to moderator
1397926994
Hero Member
*
Offline Offline

Posts: 1397926994

View Profile Personal Message (Offline)

Ignore
1397926994
Reply with quote  #2

1397926994
Report to moderator
1397926994
Hero Member
*
Offline Offline

Posts: 1397926994

View Profile Personal Message (Offline)

Ignore
1397926994
Reply with quote  #2

1397926994
Report to moderator
Tuxi
Newbie
*
Offline Offline

Activity: 7


View Profile

Ignore
August 23, 2011, 09:25:33 AM
 #582

Another linux newb here Tongue

I installed Poclbm to Ubuntu 11.04 and I got the first GPU run but the second one says this: http://koti.mbnet.fi/tuxii/error.png

I tried disabling CF through CCC but then I lost the whole adapter, though I left the CF adapter in place.

My setup:

PII X3 720BE - stock
2x 6950 watercooled - unlocked but at stock clocks

I installed the Poclbm following this guide: http://sectio-aurea.blogspot.com/2011/05/bitcoin-mining-on-ubuntu-1104-natty.html

So I have 2.4 SDK installed I think. I then found out that there was a newer SDK and I just downloaded it and did the SDK steps again in the guide. Both SDKs gave me the hardware error. Ati drivers were installed and downloaded by Ubuntu.

I don't believe it's the adapters that really fail since I've been mining with them for almost two months now. If the problem won't go away I will try flipping the GPU back to stock BIOS if it really is unstable with unlocked shaders. Also the adapters are practically new, just the few months of mining 24/7 runnin around 45-60c depending on ambient temperatures.
Crispin
Newbie
*
Offline Offline

Activity: 20


View Profile

Ignore
August 26, 2011, 09:21:05 PM
 #583

I tried setting up a new system today with a 5850. I used the 2.1 guide for a 64bit system but my CPU went up to 100%. I've read a bit about there being a bug, but it doesnt seem to be affecting everyone. Just because of this, the 2.4 guide is far better. But I have also seen how some have gotten really good results from the 2.1 setup. Does anyone have any suggestions? I have used to search button already and it didn't seem to turn anything up except to upgrade from 2.1 to something else.

I will gladly pay you Tuesday for a Bitcoin today... 
1PqTM8XXbs4yWaQy3n8Pg12SXAFZUVqrdZ
BkkCoins
Hero Member
*****
Offline Offline

Activity: 784


firstbits:1MinerQ


View Profile WWW

Ignore
August 27, 2011, 09:07:25 AM
 #584

I tried setting up a new system today with a 5850. I used the 2.1 guide for a 64bit system but my CPU went up to 100%. I've read a bit about there being a bug, but it doesnt seem to be affecting everyone. Just because of this, the 2.4 guide is far better. But I have also seen how some have gotten really good results from the 2.1 setup. Does anyone have any suggestions? I have used to search button already and it didn't seem to turn anything up except to upgrade from 2.1 to something else.

I think the CPU bug is in the driver not the SDK and you can use 11.6 but not 11.7 or later. This is what I found for myself using Ubuntu (2.4 and 11.6, high cpu usage bug went away).

Also be sure to use the newer Phoenix 1.6.2 instead of 1.48. When I finally got around to updating I immediately got a 10 MH/s gain on each card.

Crispin
Newbie
*
Offline Offline

Activity: 20


View Profile

Ignore
August 27, 2011, 09:27:41 PM
 #585

I tried setting up a new system today with a 5850. I used the 2.1 guide for a 64bit system but my CPU went up to 100%. I've read a bit about there being a bug, but it doesnt seem to be affecting everyone. Just because of this, the 2.4 guide is far better. But I have also seen how some have gotten really good results from the 2.1 setup. Does anyone have any suggestions? I have used to search button already and it didn't seem to turn anything up except to upgrade from 2.1 to something else.

I think the CPU bug is in the driver not the SDK and you can use 11.6 but not 11.7 or later. This is what I found for myself using Ubuntu (2.4 and 11.6, high cpu usage bug went away).

Also be sure to use the newer Phoenix 1.6.2 instead of 1.48. When I finally got around to updating I immediately got a 10 MH/s gain on each card.

Thanks for your reply. How do I go about upgrading what I have? -both the driver and Phoenix. I followed the 2.4 guide to the letter as of today. I am really quite new to linux and so I have no idea what or where to make an update happen. Could you post some commands for me to follow?


My new system stats:

Mobo: ASRock 970Extreme4
CPU: Sempron 140
RAM 1GB
GPU: 1x Sapphire 5850  
PSU: Corsair AX850


I will gladly pay you Tuesday for a Bitcoin today... 
1PqTM8XXbs4yWaQy3n8Pg12SXAFZUVqrdZ
BkkCoins
Hero Member
*****
Offline Offline

Activity: 784


firstbits:1MinerQ


View Profile WWW

Ignore
August 28, 2011, 01:51:19 AM
 #586

I had to go back and look at #1 post to see how the drivers get installed. It looks like this tutorial uses default repository drivers and I'm not sure what version those are now (maybe 11.7?).

You could look at the driver install step from this headless Ubuntu install below. It's actually the one I ended up using myself as I wanted a headless config (no monitor or desktop) and it looked simpler to me too.

But even with a desktop I think the driver install step should work. I used the same process to test out 11.5, 11.6 and 11.7. You've likely already done the other steps in this install so no need to repeat.

http://bitcointalk.org/index.php?topic=9239.0

The only thing is to change the number 5 to 6 in the filenames referenced. Also I remember I deleted *.deb between testing each driver out just in case dpkg didn't overwrite them.

This line below is important any time you change the GPUs in your system or move between slots. You get unpredictable results if the config isn't updated each time and the system restarted.

sudo aticonfig -f --initial --adapter=all

For phoenix you can follow the same steps in that tutorial but don't start with the 1.48 file choose the 1.6.2 one instead or "latest" (see link in Phoenix forum post). You can have them both present in separate directories, just make sure your miner start-script uses the one you intend by either using the full path or by cd'ing to correct version before running phoenix.

Christian Pezza
Member
**
Offline Offline

Activity: 98



View Profile WWW

Ignore
September 02, 2011, 12:49:18 AM
 #587

help try to reinstall and after
13. tar zxfv pyopencl-0.92.tar.gz

tar (child): pyopencl-0.92.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

and mainly wont work anything after this step  Lips sealed

If you like this tread consider to donate some to https://bitcointalk.org/donate.html
Christian Pezza
Member
**
Offline Offline

Activity: 98



View Profile WWW

Ignore
September 03, 2011, 06:57:50 AM
 #588

Guys!

 Pyopencl fails to install, look:

Code:
martinx@garimpeiro-4:~/pyopencl-0.92$ sudo make install
ctags -R src || true
/bin/sh: ctags: not found
/usr/bin/python setup.py install
running install
install_dir /usr/local/lib/python2.7/dist-packages/
Checking .pth file support in /usr/local/lib/python2.7/dist-packages/
/usr/bin/python -E -c pass
TEST PASSED: /usr/local/lib/python2.7/dist-packages/ appears to support .pth files
running bdist_egg
running egg_info
writing requirements to pyopencl.egg-info/requires.txt
writing pyopencl.egg-info/PKG-INFO
writing top-level names to pyopencl.egg-info/top_level.txt
writing dependency_links to pyopencl.egg-info/dependency_links.txt
reading manifest file 'pyopencl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
writing manifest file 'pyopencl.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-i686/egg
running install_lib
running build_py
running build_ext
creating build/bdist.linux-i686/egg
creating build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/elementwise.py -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/array.py -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/version.py -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/clmath.py -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/__init__.py -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/_cl.so -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/tools.py -> build/bdist.linux-i686/egg/pyopencl
copying build/lib.linux-i686-2.7/pyopencl/clrandom.py -> build/bdist.linux-i686/egg/pyopencl
byte-compiling build/bdist.linux-i686/egg/pyopencl/elementwise.py to elementwise.pyc
byte-compiling build/bdist.linux-i686/egg/pyopencl/array.py to array.pyc
byte-compiling build/bdist.linux-i686/egg/pyopencl/version.py to version.pyc
byte-compiling build/bdist.linux-i686/egg/pyopencl/clmath.py to clmath.pyc
byte-compiling build/bdist.linux-i686/egg/pyopencl/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-i686/egg/pyopencl/tools.py to tools.pyc
byte-compiling build/bdist.linux-i686/egg/pyopencl/clrandom.py to clrandom.pyc
creating stub loader for pyopencl/_cl.so
byte-compiling build/bdist.linux-i686/egg/pyopencl/_cl.py to _cl.pyc
creating build/bdist.linux-i686/egg/EGG-INFO
copying pyopencl.egg-info/PKG-INFO -> build/bdist.linux-i686/egg/EGG-INFO
copying pyopencl.egg-info/SOURCES.txt -> build/bdist.linux-i686/egg/EGG-INFO
copying pyopencl.egg-info/dependency_links.txt -> build/bdist.linux-i686/egg/EGG-INFO
copying pyopencl.egg-info/requires.txt -> build/bdist.linux-i686/egg/EGG-INFO
copying pyopencl.egg-info/top_level.txt -> build/bdist.linux-i686/egg/EGG-INFO
writing build/bdist.linux-i686/egg/EGG-INFO/native_libs.txt
zip_safe flag not set; analyzing archive contents...
creating 'dist/pyopencl-0.92-py2.7-linux-i686.egg' and adding 'build/bdist.linux-i686/egg' to it
removing 'build/bdist.linux-i686/egg' (and everything under it)
Processing pyopencl-0.92-py2.7-linux-i686.egg
removing '/usr/local/lib/python2.7/dist-packages/pyopencl-0.92-py2.7-linux-i686.egg' (and everything under it)
creating /usr/local/lib/python2.7/dist-packages/pyopencl-0.92-py2.7-linux-i686.egg
Extracting pyopencl-0.92-py2.7-linux-i686.egg to /usr/local/lib/python2.7/dist-packages
pyopencl 0.92 is already the active version in easy-install.pth

Installed /usr/local/lib/python2.7/dist-packages/pyopencl-0.92-py2.7-linux-i686.egg
Processing dependencies for pyopencl==0.92
Searching for decorator>=3.2.0
Reading http://pypi.python.org/simple/decorator/
No local packages or download links found for decorator>=3.2.0
error: Could not find suitable distribution for Requirement.parse('decorator>=3.2.0')
make: *** [install] Error 1
same problem here Sad

 At the site http://pypi.python.org/simple/decorator/ there is only decorator-3.3.1.tar.gz!!

 This is happening with somebody!? To temporally workaround this issue, I just copy a "pre-compiled" pyopencl from my other rig to this one and the "make install" works!

 But for a brand new installation, this does not work anymore... Anyway, I'll try to compile this again in a new server next week.

Thanks!
Thiago

If you like this tread consider to donate some to https://bitcointalk.org/donate.html
sunbird
Newbie
*
Offline Offline

Activity: 23


View Profile

Ignore
September 05, 2011, 04:41:08 AM
 #589

Hi all,

Trying to get my first rig going.

Fresh 11.04 install.

Followed every step of the guide, without any errors, but I'm getting this error for poclbm

Code:
$ ./poclbm.py
Traceback (most recent call last):
  File "./poclbm.py", line 47, in <module>
    platforms = cl.get_platforms()
pyopencl.LogicError: clGetPlatformIDs failed: invalid/unknown error code

and this one on phoenix:

Code:
$ ./phoenix.py
Traceback (most recent call last):
  File "./phoenix.py", line 29, in <module>
    import minerutil
  File "/media/meerkat/phoenix/minerutil/__init__.py", line 25, in <module>
    from RPCProtocol import RPCClient
  File "/media/meerkat/phoenix/minerutil/RPCProtocol.py", line 26, in <module>
    from twisted.web.iweb import IBodyProducer
ImportError: No module named web.iweb

I'm sure they are related. I've browsed this thread but haven't found a solution. Would appreciate any help. This is with the 2.1 sdk.

Edit: I noticed that most of the instructions ask for 11.04 desktop, I used server, so I'm going to reinstall and try again with a clean desktop install. It would be great to get this working with the -server versions for folks who are planning to run headless.
Christian Pezza
Member
**
Offline Offline

Activity: 98



View Profile WWW

Ignore
September 05, 2011, 07:04:16 AM
 #590

After a PM to Inaba he answer me:
"I will look into rewriting it sometime in the near future."

but not much more for now Sad

I am totally stuck I wish to help more

If you like this tread consider to donate some to https://bitcointalk.org/donate.html
BkkCoins
Hero Member
*****
Offline Offline

Activity: 784


firstbits:1MinerQ


View Profile WWW

Ignore
September 05, 2011, 07:17:26 AM
 #591

After a PM to Inaba he answer me:
"I will look into rewriting it sometime in the near future."

but not much more for now Sad

I am totally stuck I wish to help more

You might check this alternate Ubuntu install thread to see if it works better for the steps you have trouble with.

https://bitcointalk.org/index.php?topic=9239.0

I started with the one in this thread but ended with better results following that one.

sunbird
Newbie
*
Offline Offline

Activity: 23


View Profile

Ignore
September 05, 2011, 05:29:18 PM
 #592

Hi all,

This post did work for me https://bitcointalk.org/index.php?topic=9239.0 - at least partially. I now have the graphics cards working with the drivers and AMDsdk installed and working. But my graphics card doesn't show up with opencl:

Code:
$ ../poclbm/poclbm.py
No protocol specified
No device specified or device not found, use -d to specify one of the following

[0] AMD Sempron(tm) 145 Processor

running /.clinfo also shows only the processor, not the card.

But the card is installed and the graphics driver sees it:

Code:
$ DISPLAY=:0 sudo aticonfig --odgt --adapter=all

Adapter 0 - ATI Radeon HD 4800 Series         
            Sensor 0: Temperature - 48.50 C

Thoughts from the group?

Christian Pezza
Member
**
Offline Offline

Activity: 98



View Profile WWW

Ignore
September 05, 2011, 05:36:40 PM
 #593

Hi all,

This post did work for me https://bitcointalk.org/index.php?topic=9239.0 - at least partially. I now have the graphics cards working with the drivers and AMDsdk installed and working. But my graphics card doesn't show up with opencl:

Code:
$ ../poclbm/poclbm.py
No protocol specified
No device specified or device not found, use -d to specify one of the following

[0] AMD Sempron(tm) 145 Processor

running /.clinfo also shows only the processor, not the card.

But the card is installed and the graphics driver sees it:

Code:
$ DISPLAY=:0 sudo aticonfig --odgt --adapter=all

Adapter 0 - ATI Radeon HD 4800 Series        
            Sensor 0: Temperature - 48.50 C

Thoughts from the group?


see
https://bitcointalk.org/index.php?topic=7514.msg438546#msg438546

and reboot

If you like this tread consider to donate some to https://bitcointalk.org/donate.html
sunbird
Newbie
*
Offline Offline

Activity: 23


View Profile

Ignore
September 05, 2011, 06:52:13 PM
 #594

Hi all,

This post did work for me https://bitcointalk.org/index.php?topic=9239.0 - at least partially. I now have the graphics cards working with the drivers and AMDsdk installed and working. But my graphics card doesn't show up with opencl:

Code:
$ ../poclbm/poclbm.py
No protocol specified
No device specified or device not found, use -d to specify one of the following

[0] AMD Sempron(tm) 145 Processor

running /.clinfo also shows only the processor, not the card.

But the card is installed and the graphics driver sees it:

Code:
$ DISPLAY=:0 sudo aticonfig --odgt --adapter=all

Adapter 0 - ATI Radeon HD 4800 Series        
            Sensor 0: Temperature - 48.50 C

Thoughts from the group?


see
https://bitcointalk.org/index.php?topic=7514.msg438546#msg438546

and reboot

Thanks. I tried this but poclbm still doesn't see my video card when running as standard user. However, in the same thread you referenced, someone mentioned running poclbm as root and that does see both my cards. The ati sdk directories are owned by root, but all the files are chmod'd 755, so they should be executable by a non-priv user. Obviously, i'm not going to run my mining as root...

Any ideas?
Christian Pezza
Member
**
Offline Offline

Activity: 98



View Profile WWW

Ignore
September 08, 2011, 04:08:33 AM
 #595

After a PM to Inaba he answer me:
"I will look into rewriting it sometime in the near future."

but not much more for now Sad

I am totally stuck I wish to help more

You might check this alternate Ubuntu install thread to see if it works better for the steps you have trouble with.

https://bitcointalk.org/index.php?topic=9239.0

I started with the one in this thread but ended with better results following that one.


same problem but the real deal is:
Cannot write to `bitcoin-0.3.21-linux.tar.gz' (Read-only file system).

cannot write to 'anything doesent matter what u do'

any Idea... never changed and what make different now from 2 moths a go  Huh

Cheers

BTW I am stuck I don't have time to study more stuff Sad

If you like this tread consider to donate some to https://bitcointalk.org/donate.html
Anonymous
Guest

September 20, 2011, 07:43:59 PM
 #596

I got this on step 13 (I tried to traduce it):
Code:
user@computername:~$ tar zxfv pyopencl-0.92.tar.gz
tar (child): pyopencl-0.92.tar.gz : the function open has failed: No file or folder of this type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

Could some one explain me, what that means and how I can fix it?
BkkCoins
Hero Member
*****
Offline Offline

Activity: 784


firstbits:1MinerQ


View Profile WWW

Ignore
September 21, 2011, 12:33:37 AM
 #597

I got this on step 13 (I tried to traduce it):
Code:
user@computername:~$ tar zxfv pyopencl-0.92.tar.gz
tar (child): pyopencl-0.92.tar.gz : the function open has failed: No file or folder of this type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

Could some one explain me, what that means and how I can fix it?

You need a dash in front of zxfv ie. -zxfv since it's options, not a filename.
Also the order is wrong as the filename follows so the f must be last,

-xzvf

amazingrando
SCAMMER
Hero Member
*****
Offline Offline

Activity: 546



View Profile

Ignore
September 22, 2011, 06:02:53 PM
 #598

I have several machines set up with the original config (2.4) in the first post.  The driver is 11.4 and I want to upgrade to 11.6 or newer so I can over/underclock past BIOS limits.

I tried this process, but I get a "No protocol specified" error after the upgrade
Code:
cd ~
sudo apt-get remove fglrx
wget http://www2.ati.com/drivers/linux/ati-driver-installer-11-6-x86.x86_64.run
sudo sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/natty
sudo dpkg -i *.deb
sudo apt-get -f install
sudo aticonfig -f --initial --adapter=all
sudo reboot

Is there a better way to do the upgrade?

Also, can the newest version, 11.8, work with APP SDK 2.4, or would that need to be upgraded too?  If so, I'd just stick with 11.6.

Bitbond - 105% PPS mining bond - mining payouts without buying hardware
Anonymous
Guest

September 24, 2011, 03:27:49 PM
 #599

I got this on step 13 (I tried to traduce it):
Code:
user@computername:~$ tar zxfv pyopencl-0.92.tar.gz
tar (child): pyopencl-0.92.tar.gz : the function open has failed: No file or folder of this type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now

Could some one explain me, what that means and how I can fix it?

You need a dash in front of zxfv ie. -zxfv since it's options, not a filename.
Also the order is wrong as the filename follows so the f must be last,

-xzvf

Well, I tried some changes out and it changed nothing. I still get:

Code:
user@computer:~$ tar -xzvf pyopencl-0.92.tar.gz
tar (child): pyopencl-0.92.tar.gz : the function open has failed: No file or folder of this type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
Code:
user@computer:~$ sudo tar -xzvf pyopencl-0.92.tar.gz
tar (child): pyopencl-0.92.tar.gz : the function open has failed: No file or folder of this type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
Code:
user@computer:~$ sudo tar -xzvf pyopencl-0.92.tar.gz -C /
tar (child): pyopencl-0.92.tar.gz : the function open has failed: No file or folder of this type
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
fivebells
Sr. Member
****
Offline Offline

Activity: 308


View Profile

Ignore
September 24, 2011, 03:52:04 PM
 #600

Well, I tried some changes out and it changed nothing. I still get:
  Tell us the output of
Code:
file pyopencl-0.92.tar.gz
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [30] 31 32
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!